Sampling of respirable isocyanate particles.

An advanced design of a denuder impactor (DI) sampler has been developed for characterization of possible airborne isocyanate exposure in different particle size fractions. The sampler is equipped with 12 different parallel denuder tubes, 4 impaction stages with the cut-off values (d50) of: 9.5, 4, 2.

Dry sampling of gas-phase isocyanates and isocyanate aerosols from thermal degradation of polyurethane.

The performance of a dry sampler, with an impregnated denuder in series with a glass fibre filter, using di-n-butylamine (DBA) for airborne isocyanates (200ml min(-1)) is investigated and compared with an impinger flask with a glass fibre filter in series (1 l min(-1)). An exposure chamber containing 1,6-hexamethylene diisocyanate (HDI), isophorone diisocyanate (IPDI), and 2,4- and 2,6-toluene diisocyanate (TDI) in the concentration range of 5-205 μg m(-3) [0.7-33 p.

Determination of aromatic amines in aqueous extracts of polyurethane foam using hydrophilic interaction liquid chromatography and mass spectrometry.

A method is presented for the determination of aromatic amines in aqueous extracts of polyurethane (PUR) foam. The method is based on the extraction of PUR foam using aqueous acetic acid (0.1%, w/v) followed by determination of extracted aromatic amines using hydrophilic interaction liquid chromatography (HILIC) and tandem mass spectrometry (MS/MS) with positive electrospray ionisation.

Adsorption efficiency of respirator filter cartridges for isocyanates.

In some industries, the temperature and the humidity will vary greatly between different work places, such as outdoor work in arctic or tropical climates. There is therefore a need to test respirator filters at conditions that simulate conditions that are relevant for the industries that they are used in. Filter cartridges were exposed to controlled atmospheres of varying isocyanate concentration, air humidity, and temperature in an exposure chamber.

Size-separated sampling and analysis of isocyanates in workplace aerosols. Part I. Denuder--cascade impactor sampler.

Isocyanates in the workplace atmosphere are typically present both in gas and particle phase. The health effects of exposure to isocyanates in gas phase and different particle size fractions are likely to be different due to their ability to reach different parts in the respiratory system. To reveal more details regarding the exposure to isocyanate aerosols, a denuder-impactor (DI) sampler for airborne isocyanates was designed.

Size-separated sampling and analysis of isocyanates in workplace aerosols--Part II: aging of aerosols from thermal degradation of polyurethane.

A new type of isocyanate sampler has been used to investigate aging aerosols generated during thermal degradation of polyurethane (PUR). The sampler consists of a denuder connected in series with a three-stage cascade impactor and a filter. The denuder collects gas-phase isocyanates.

Solvent-free sampling with di-n-butylamine for monitoring of isocyanates in air.

The solvent-free sampler for airborne isocyanates consisted of a polypropylene tube with an inner wall coated with a glass fibre filter, coupled in series with a 13 mm glass fibre filter. The filters were impregnated with reagent solution containing equimolar amounts of di-n-butylamine (DBA) and acetic acid. Air sampling was performed with an air flow of 0.

Determination of airborne anhydrides using LC-MS monitoring negative ions of di-n-butylamine derivatives.

An air sampling method for simultaneous determination of organic acid anhydrides and isocyanates is presented. Air samples are collected in impinger flasks filled with 0.01 M di-n-butylamine (DBA) in a mixture of toluene-acetonitrile (7:3, v/v) with a 13 millimetre glass fibre filter in series.

Determination of technical grade isocyanates used in the production of polyurethane plastics.

A method for determination of technical grade isocyanates used in the production of polyurethane (PUR) is presented. The isocyanates in technical grade products were characterised as di-n-butylamine (DBA) derivatives using LC-MS and LC-chemiluminescent nitrogen detection (CLND) and the total isocyanate content was compared to a titration assay. For collection of isocyanates in air, an impinger-filter sampling technique with DBA as derivatisation reagent was used.

Determination of amines as pentafluoropropionic acid anhydride derivatives in biological samples using liquid chromatography and tandem mass spectrometry.

Determination of amines in biological samples as markers of exposure to the amines or the corresponding isocyanates is an important tool for industrial exposure assessment. In this study, a liquid chromatography and tandem mass spectrometry (LC-MS/MS) method for determination of amines in biological samples as perfluorofatty amides derivatives is presented. The method enables determination of diamines such as methylene diamine (MDA), toluene diamine (TDA), naphthalene diamine (NDA), hexamethylene diamine (HDA), isophorone diamine (IPDA), methylenedi(cyclohexylamine)(HMDA) and 4,4'-methylene-(2-chloroaniline)(MOCA) in human urine and plasma.

Exposure and nasal inflammation in workers heating polyurethane.

Objective: To test the hypothesis that exposure to thermal-degradation products of polyurethane (PUR), particularly isocyanates, induced nasal inflammation.

Methods: Thirty-eight workers -14 with a history of work-related nasal symptoms (WRS/Nose), and 15 referents without such history - exposed to sprayed and heated PUR glue, were studied with regard to biomarkers of isocyanate exposure [4,4'-diphenylmethane diisocyanate (4,4'-methylenediphenyl diisocyanate; MDI) and 2,4- and 2,6-toluene diisocyanate (TDI), determined as 4,4'-diphenylmethane (U-MDX) and 2,4- and 2,6-toluene (U-2,4 and U-2,6-TDX) diamine in hydrolysed urine and nasal lavage fluid (NAL)], inflammation [albumin; eosinophilic cationic protein (ECP); myeloperoxidase (MPO) and cells in NAL], serum IgG specific for MDI (S-IgG-MDI) and TDI (S-IgG-TDI), and nose symptoms. Nine unexposed office workers were also examined.

Determination of isocyanates, aminoisocyanates and amines in air formed during the thermal degradation of polyurethane.

An air sampling method for the determination of isocyanates, aminoisocyanates and amines formed during the thermal degradation of polyurethane (PUR) is presented. The method is based on the collection of air samples using impinger flasks containing di-n-butylamine (DBA) in toluene with a glass fibre filter in series. Isocyanates are derivatized with DBA to urea derivatives, and amines are derivatized in a subsequent work-up procedure with ethyl chloroformate (ET) to carbamate esters.

Determination of isocyanic acid in air.

A method is presented for the determination of isocyanic acid (ICA), HNCO, in air samples as a di-n-butylamine (DBA) derivative. The method is based on sampling in midget impinger flasks containing 10 ml of 0.01 mol l-1 DBA in toluene.

Airborne thermal degradation products of polyurethene coatings in car repair shops.

A methodology for workplace air monitoring of aromatic and aliphatic, mono- and polyisocyanates by derivatisation with di-n-butylamine (DBA) is presented. Air sampling was performed using midget impinger flasks containing 10 ml of 0.01 mol l(-1) DBA in toluene and a glass-fibre filter in series after the impinger flask, thereby providing the possibility of collecting and derivatising isocyanates in both the gas and particle phases.

Exposure biomarkers and risk from gluing and heating of polyurethane: a cross sectional study of respiratory symptoms.

Objectives: To define the relation between exposure to polyurethane (PUR) glue, biomarkers of exposure and effect, and work related symptoms that occur at least once a week.

Methods: In a cross sectional study, 152 workers and 14 clerks in a factory with exposure to sprayed and heated PUR glue containing 4, 4'-diphenylmethane (MDI) or 1,6-hexamethylene (HDI) di-isocyanate were examined with gas chromatography-mass spectrometry (GC-MS) for metabolites of MDI in plasma (P-MDX) and urine (U-MDX), 2,4- and 2, 6-toluene di-isocyanate (TDI; P-TDX, U-TDX) and HDI in plasma and urine, specific serum IgG (S-IgG-MDI, S-IgG-HDI, and S-IgG-TDI, respectively) and IgE (S-IgE-MDI). Work related symptoms of the eyes and airways (nose or lower airways, or both), and lung function were also evaluated.

Determination of complex mixtures of airborne isocyanates and amines. Part 5. Determination of low molecular weight aliphatic isocyanates as dibutylamine derivatives.

A method is presented for the determination of low molecular weight aliphatic isocyanates, methyl isocyanate (MIC), ethyl isocyanate (EIC), propyl isocyanate (PIC) and butyl isocyanate (BIC), as their dibutylamine (DBA) derivatives. The method is based on sampling in midget impinger flasks containing 10 ml of 0.01 mol l-1 DBA in toluene (as in Parts 1-4 in this series).

Workers exposed to thermal degradation products of TDI- and MDI-based polyurethane: biomonitoring of 2,4-TDA, 2,6-TDA, and 4,4'-MDA in hydrolyzed urine and plasma.

The aim of the study was to investigate biomarkers of exposure to thermal degradation products of 2,4- and 2,6-toluene diisocyanate (TDI)- and 4,4'-methylenediphenyl diisocyanate (MDI)-based polyurethane and the toxicokinetics of these products. Blood and urine were collected from 15 factory workers exposed to thermal degradation products of MDI-based polyurethane glue and TDI-based flexible foam. Four of these workers were also studied during an exposure-free period.

Determination of complex mixtures of airborne isocyanates and amines. Part 3. Methylenediphenyl diisocyanate, methylenediphenylamino isocyanate and methylenediphenyldiamine and structural analogues after thermal degradation of polyurethane.

A method is presented for the determination of isocyanates in polymeric methylenediphenyl diisocyanate (MDI) and related compounds formed during the thermal decomposition of polyurethane (PUR). Derivatization of isocyanates was performed in impinger flasks containing dibutylamine (DBA) with the formation of urea derivatives. Compounds containing amine groups were then derivatized with ethyl chloroformate (ET to give urethane derivatives.

Air and biological monitoring of toluene diisocyanate in a flexible foam plant.

Comparative air measurements of toluene diisocyanate (TDI) were performed in a 5.6 m3 standard atmosphere and at a TDI flexible foam plant. Air samples were collected in midget impinger flasks containing 9-(N-methyl-amino-methyl)-anthracene (MAMA) in toluene and on 13-mm glass-fiber filters impregnated with MAMA and glycerol analyzed by LC-UV and with filter-tape instruments.

Albumin adducts in plasma from workers exposed to toluene diisocyanate.

Desalted plasma from a 2,4- and 2,6-toluene diisocyanate (2,4- and 2,6-TDI) exposed worker at a factory producing flexible polyurethane foam was separated and fractionated into 200 fractions using ion-exchange chromatography followed by a gel-filtration separation and fractionation into 59 fractions. The corresponding amines (to the isocyanates), 2,4- and 2,6-toluenediamine (2,4- and 2,6-TDA), were determined in each fraction after sulfuric acid hydrolysis as pentafluoropropionic anhydride derivatives by capillary gas chromatography and chemical ionisation mass spectrometry monitoring negative ions. The ion exchange fractions containing TDA (81-115) were added together and the solution was separated and fractionated on the gel-filtration column.

Biomarkers in hydrolysed urine, plasma and erythrocytes among workers exposed to thermal degradation products from toluene diisocyanate foam.

Blood and urine samples were collected from six workers and two volunteers exposed to thermal degradation products from toluene diisocyanate (TDI)-based polyurethane (PUR) before and during the summer vacation. Air samples were collected on filters impregnated with 9-(N-methylaminomethyl)anthracene. The concentrations of the amines corresponding to 2,4- and 2,6-TDI, i.

Biomarkers of exposure, antibodies, and respiratory symptoms in workers heating polyurethane glue.

Objectives: The pathogenic basis of respiratory disorders associated with isocyanates are still obscure. One reason for this is the lack of good estimates of human exposure. In this study exposure was estimated by measurement of isocyanate metabolites in biological samples.

Toxicokinetics of 2,4- and 2,6-toluenediamine in hydrolysed urine and plasma after occupational exposure to 2,4- and 2,6- toluene diisocyanate.

Objectives: To assess the toxicokinetics of 2,4- and 2,6- toluenediisocyanate (TDI) in chronically exposed subjects.

Methods: Blood and urine, from 11 workers at two flexible foam polyurethane production plants, were sampled. By gas chromatography-mass spectrometry (GC-MS) 2,4- and 2,6-toluene diamine (TDA) were measured as pentafluoropropionic anhydride (PFPA) derivatives after acidic hydrolysis of plasma (P-TDA, ng/ml) and urine (U-TDA, microgram/h).

MDA in plasma as a biomarker of exposure to pyrolysed MDI-based polyurethane: correlations with estimated cumulative dose and genotype for N-acetylation.

The object of this study was to investigate whether exposure of pipe-layers to thermal degradation products of diphenylmethane diisocyanate (MDI) could be assessed by analysing 4,4-methylenedianiline (MDA) in hydrolysed plasma and urine, and whether the genotype for N-acetylation affected these biomarker levels. Blood and urine samples were drawn from 30-pipe-layers who had been welding polyurethane (PUR) insulated pipes during the preceding 3 months. MDA in hydrolysed plasma and urine was determined with a gas chromatography-mass spectrometry technique, and genotype for N-acetylation was analysed with a polymerase chain reaction technique.

Analysis of the reactivity of [14C]toluene diisocyanate (TDI) in an isolated, perfused lung model.

An isolated, perfused, guinea pig lung model was used to investigate the molecular events which occur when a 14C-labeled TDI vapor reaches the airways. Exposure concentrations of 0.2 and 0.