Spectral induced polarization (SIP) measurements across a PFAS-contaminated source zone.

There is a need to develop field-scale, in situ screening technologies for assessing variations in aqueous film-forming foam (AFFF) concentrations in soils at former fire training and storage sites. Field-scale Spectral Induced Polarization (SIP) geophysical measurements were acquired on a transect crossing an AFFF source zone. Soil samples were acquired to determine variations in poly- and per-fluoroalkyl substances (PFAS) concentrations in soils, characterize soil texture, and create triplicate soil columns for laboratory SIP measurements.

Geophysical signatures of soil AFFF contamination from spectral induced polarization and low field nuclear magnetic resonance methods.

Few field methods are available for characterizing source zones impacted with aqueous film forming foam (AFFF). Non-invasive geophysical characterization of AFFF source zone contamination in situ could assist with the delineation and characterization of these sites, allowing for more informed sampling regimes aimed at quantifying subsurface poly- and perfluoroalkyl substances (PFAS) contamination. We present initial results from the investigation of the sensitivity of two existing surface and borehole-deployable geophysical technologies, spectral induced polarization (SIP), and low field nuclear magnetic resonance (NMR), to soils impacted with AFFF.

Field evaluation of semi-automated moisture estimation from geophysics using machine learning.

Geophysical methods can provide three-dimensional (3D), spatially continuous estimates of soil moisture. However, point-to-point comparisons of geophysical properties to measure soil moisture data are frequently unsatisfactory, resulting in geophysics being used for qualitative purposes only. This is because (1) geophysics requires models that relate geophysical signals to soil moisture, (2) geophysical methods have potential uncertainties resulting from smoothing and artifacts introduced from processing and inversion, and (3) results from multiple geophysical methods are not easily combined within a single soil moisture estimation framework.

Application of Recursive Estimation to Heat Tracing for Groundwater/Surface-Water Exchange.

We present and demonstrate a recursive-estimation framework to infer groundwater/surface-water exchange based on temperature time series collected at different vertical depths below the sediment/water interface. We formulate the heat-transport problem as a state-space model (SSM), in which the spatial derivatives in the convection/conduction equation are approximated using finite differences. The SSM is calibrated to estimate time-varying specific discharge using the Extended Kalman Filter (EKF) and Extended Rauch-Tung-Striebel Smoother (ERTSS).

GW/SW-MST: A Groundwater/Surface-Water Method Selection Tool.

Groundwater/surface-water (GW/SW) exchange and hyporheic processes are topics receiving increasing attention from the hydrologic community. Hydraulic, chemical, temperature, geophysical, and remote sensing methods are used to achieve various goals (e.g.

Geophysical Assessment of a Proposed Landfill Site in Fredericktown, Missouri.

In cooperation with the U.S. Environmental Protection Agency (EPA), the U.

DTSGUI: A Python Program to Process and Visualize Fiber-Optic Distributed Temperature Sensing Data.

Fiber-optic distributed temperature sensing (FO-DTS) has proven to be a transformative technology for the hydrologic sciences, with application to diverse problems including hyporheic exchange, groundwater/surface-water interaction, fractured-rock characterization, and cold regions hydrology. FO-DTS produces large, complex, and information-rich datasets. Despite the potential of FO-DTS, adoption of the technology has been impeded by lack of tools for data processing, analysis, and visualization.

The Dual-Domain Porosity Apparatus: Characterizing Dual Porosity at the Sediment/Water Interface.

The characterization of pore-space connectivity in porous media at the sediment/water interface is critical in understanding contaminant transport and reactive biogeochemical processes in zones of groundwater and surface-water exchange. Previous in situ studies of dual-domain (i.e.

Geophysical methods for monitoring soil stabilization processes.

Soil stabilization involves methods used to turn unconsolidated and unstable soil into a stiffer, consolidated medium that could support engineered structures, alter permeability, change subsurface flow, or immobilize contamination through mineral precipitation. Among the variety of available methods carbonate precipitation is a very promising one, especially when it is being induced through common soil borne microbes (MICP - microbial induced carbonate precipitation). Such microbial mediated precipitation has the added benefit of not harming the environment as other methods can be environmentally detrimental.

MoisturEC: A New R Program for Moisture Content Estimation from Electrical Conductivity Data.

Noninvasive geophysical estimation of soil moisture has potential to improve understanding of flow in the unsaturated zone for problems involving agricultural management, aquifer recharge, and optimization of landfill design and operations. In principle, several geophysical techniques (e.g.

Hydrogeochemical controls on brook trout spawning habitats in a coastal stream.

Brook trout spawn in fall and overwintering egg development can benefit from stable, relatively warm temperatures in groundwater-seepage zones. However, eggs are also sensitive to dissolved oxygen concentration, which may be reduced in discharging groundwater (i.e.

Specific polarizability of sand-clay mixtures with varying ethanol concentration.

We utilise a concept of specific polarizability ( ), represented as the ratio of mineral-fluid interface polarization per pore-normalised surface area , to demonstrate the influence of clay-organic interaction on complex conductivity measurements. Complex conductivity measurements were performed on kaolinite- and illite-sand mixtures as a function of varying ethanol (EtOH) concentration (10% and 20% v/v). The specific surface area of each clay type and Ottawa sand was determined by nitrogen-gas-adsorption Brunauer-Emmett-Teller method.

Heat as a groundwater tracer in shallow and deep heterogeneous media: Analytical solution, spreadsheet tool, and field applications.

Groundwater flow advects heat, and thus, the deviation of subsurface temperatures from an expected conduction-dominated regime can be analysed to estimate vertical water fluxes. A number of analytical approaches have been proposed for using heat as a groundwater tracer, and these have typically assumed a homogeneous medium. However, heterogeneous thermal properties are ubiquitous in subsurface environments, both at the scale of geologic strata and at finer scales in streambeds.

Scenario Evaluator for Electrical Resistivity Survey Pre-modeling Tool.

Geophysical tools have much to offer users in environmental, water resource, and geotechnical fields; however, techniques such as electrical resistivity imaging (ERI) are often oversold and/or overinterpreted due to a lack of understanding of the limitations of the techniques, such as the appropriate depth intervals or resolution of the methods. The relationship between ERI data and resistivity is nonlinear; therefore, these limitations depend on site conditions and survey design and are best assessed through forward and inverse modeling exercises prior to field investigations. In this approach, proposed field surveys are first numerically simulated given the expected electrical properties of the site, and the resulting hypothetical data are then analyzed using inverse models.

An overview of geophysical technologies appropriate for characterization and monitoring at fractured-rock sites.

Geophysical methods are used increasingly for characterization and monitoring at remediation sites in fractured-rock aquifers. The complex heterogeneity of fractured rock poses enormous challenges to groundwater remediation professionals, and new methods are needed to cost-effectively infer fracture and fracture-zone locations, orientations and properties, and to develop conceptual site models for flow and transport. Despite the potential of geophysical methods to "see" between boreholes, two issues have impeded the adoption of geophysical methods by remediation professionals.

Complex conductivity response to silver nanoparticles in partially saturated sand columns.

The increase in the use of nanoscale materials in consumer products has resulted in a growing concern of their potential hazard to ecosystems and public health from their accidental or intentional introduction to the environment. Key environmental, health, and safety research needs include knowledge and methods for their detection, characterization, fate, and transport. Specifically, techniques available for the direct detection and quantification of their fate and transport in the environment are limited.

1DTempPro V2: New Features for Inferring Groundwater/Surface-Water Exchange.

A new version of the computer program 1DTempPro extends the original code to include new capabilities for (1) automated parameter estimation, (2) layer heterogeneity, and (3) time-varying specific discharge. The code serves as an interface to the U.S.

Complex resistivity signatures of ethanol biodegradation in porous media.

Numerous adverse effects are associated with the accidental release of ethanol (EtOH) and its persistence in the subsurface. Geophysical techniques may permit non-invasive, real time monitoring of microbial degradation of hydrocarbon. We performed complex resistivity (CR) measurements in conjunction with geochemical data analysis on three microbial-stimulated and two control columns to investigate changes in electrical properties during EtOH biodegradation processes in porous media.

Complex resistivity signatures of ethanol in sand-clay mixtures.

We performed complex resistivity (CR) measurements on laboratory columns to investigate changes in electrical properties as a result of varying ethanol (EtOH) concentration (0% to 30% v/v) in a sand-clay (bentonite) matrix. We applied Debye decomposition, a phenomenological model commonly used to fit CR data, to determine model parameters (time constant: τ, chargeability: m, and normalized chargeability: mn). The CR data showed a significant (P≤0.

1DTempPro: analyzing temperature profiles for groundwater/surface-water exchange.

A new computer program, 1DTempPro, is presented for the analysis of vertical one-dimensional (1D) temperature profiles under saturated flow conditions. 1DTempPro is a graphical user interface to the U.S.

Electrical signatures of ethanol-liquid mixtures: implications for monitoring biofuels migration in the subsurface.

Ethanol (EtOH), an emerging contaminant with potential direct and indirect environmental effects, poses threats to water supplies when spilled in large volumes. A series of experiments was directed at understanding the electrical geophysical signatures arising from groundwater contamination by ethanol. Conductivity measurements were performed at the laboratory scale on EtOH-water mixtures (0 to 0.

The microbial community structure in petroleum-contaminated sediments corresponds to geophysical signatures.

The interdependence between geoelectrical signatures at underground petroleum plumes and the structures of subsurface microbial communities was investigated. For sediments contaminated with light non-aqueous-phase liquids, anomalous high conductivity values have been observed. Vertical changes in the geoelectrical properties of the sediments were concomitant with significant changes in the microbial community structures as determined by the construction and evaluation of 16S rRNA gene libraries.