Odd-Even Alkyl Chain Effects on the Structure and Charge Carrier Transport of Two-Dimensional Sn-Based Perovskite Semiconductors.

Oscillations in the chemical or physical properties of materials, composed of an odd or even number of connected repeating methylene units, are a well-known phenomenon in organic chemistry and materials science. So far, such behavior has not been reported for the important class of materials, perovskite semiconductors. This work reports a distinct odd-even oscillation of the molecular structure and charge carrier transport properties of phenylalkylammonium two-dimensional (2D) Sn-based perovskites in which the alkyl chains in the phenylalkylammonium cations contain varying odd and even carbon numbers.

Multimodal 2D and 3D microscopic mapping of growth cartilage by computational imaging techniques - a short review including new research.

Being able to image the microstructure of growth cartilage is important for understanding the onset and progression of diseases such as osteochondrosis and osteoarthritis, as well as for developing new treatments and implants. Studies of cartilage using conventional optical brightfield microscopy rely heavily on histological staining, where the added chemicals provide tissue-specific colours. Other microscopy contrast mechanisms include polarization, phase- and scattering contrast, enabling non-stained or 'label-free' imaging that significantly simplifies the sample preparation, thereby also reducing the risk of artefacts.

Multiscale drainage dynamics with Haines jumps monitored by stroboscopic 4D X-ray microscopy.

Slow multiphase flow in porous media is intriguing because its underlying dynamics is almost deterministic, yet depends on a hierarchy of spatiotemporal processes. There has been great progress in the experimental study of such multiphase flows, but three-dimensional (3D) microscopy methods probing the pore-scale fluid dynamics with millisecond resolution have been lacking. Yet, it is precisely at these length and time scales that the crucial pore-filling events known as Haines jumps take place.

High-resolution polarization-sensitive Fourier ptychography microscopy using a high numerical aperture dome illuminator.

Polarization-sensitive Fourier-ptychography microscopy (pFPM) allows for high resolution imaging while maintaining a large field of view, and without mechanical movements of optical-setup components. In contrast to ordinary light microscopes, pFPM provides quantitative absorption and phase information, for complex and birefringent specimens, with high resolution across a wide field of view. Using a semi-spherical home-built LED illumination array, a single polarizer, and a 10x /0.

Quantifying the hydroxyapatite orientation near the ossification front in a piglet femoral condyle using X-ray diffraction tensor tomography.

While a detailed knowledge of the hierarchical structure and morphology of the extracellular matrix is considered crucial for understanding the physiological and mechanical properties of bone and cartilage, the orientation of collagen fibres and carbonated hydroxyapatite (HA) crystallites remains a debated topic. Conventional microscopy techniques for orientational imaging require destructive sample sectioning, which both precludes further studies of the intact sample and potentially changes the microstructure. In this work, we use X-ray diffraction tensor tomography to image non-destructively in 3D the HA orientation in a medial femoral condyle of a piglet.

Nanoscale imaging of shale fragments with coherent X-ray diffraction.

Despite the abundance of shales in the Earth's crust and their industrial and environmental importance, their microscale physical properties are poorly understood, owing to the presence of many structurally related mineral phases and a porous network structure spanning several length scales. Here, the use of coherent X-ray diffraction imaging (CXDI) to study the internal structure of microscopic shale fragments is demonstrated. Simultaneous wide-angle X-ray diffraction (WAXD) measurement facilitated the study of the mineralogy of the shale microparticles.

Real Time 3D Observations of Portland Cement Carbonation at CO Storage Conditions.

Depleted oil reservoirs are considered a viable solution to the global challenge of CO storage. A key concern is whether the wells can be suitably sealed with cement to hinder the escape of CO. Under reservoir conditions, CO is in its supercritical state, and the high pressures and temperatures involved make real-time microscopic observations of cement degradation experimentally challenging.

Tuning and Tracking of Coherent Shear Waves in Molecular Films.

We have determined the time-dependent displacement fields in molecular sub-micrometer thin films as response to femtosecond and picosecond laser pulse heating by time-resolved X-ray diffraction. This method allows a direct absolute determination of the molecular displacements induced by electron-phonon interactions, which are crucial for, for example, charge transport in organic electronic devices. We demonstrate that two different modes of coherent shear motion can be photoexcited in a thin film of organic molecules by careful tuning of the laser penetration depth relative to the thickness of the film.

In situ coherent X-ray diffraction imaging of radiation-induced mass loss in metal-polymer composite spheres.

A major limitation to the use of coherent X-ray diffraction imaging (CXDI) for imaging soft materials like polymers and biological tissue is that the radiation can cause extensive damage to the sample under investigation. In this study, CXDI has been used to monitor radiation-induced structural changes in metal-coated poly(methyl methacrylate) microspheres. Using a coherent undulator X-ray beam with 8.

3D Maps of Mineral Composition and Hydroxyapatite Orientation in Fossil Bone Samples Obtained by X-ray Diffraction Computed Tomography.

Whether hydroxyapatite (HA) orientation in fossilised bone samples can be non-destructively retrieved and used to determine the arrangement of the bone matrix and the location of muscle attachments (entheses), is a question of high relevance to palaeontology, as it facilitates a detailed understanding of the (micro-)anatomy of extinct species with no damage to the precious fossil specimens. Here, we report studies of two fossil bone samples, specifically the tibia of a 300-million-year-old tetrapod, Discosauriscus austriacus, and the humerus of a 370-million-year-old lobe-finned fish, Eusthenopteron foordi, using XRD-CT - a combination of X-ray diffraction (XRD) and computed tomography (CT). Reconstructed 3D images showing the spatial mineral distributions and the local orientation of HA were obtained.

High-resolution coherent x-ray diffraction imaging of metal-coated polymer microspheres.

Coherent x-ray diffraction imaging (CXDI) is becoming an important 3D quantitative microscopy technique, allowing structural investigation of a wide range of delicate mesoscale samples that cannot be imaged by other techniques like electron microscopy. Here we report high-resolution 3D CXDI performed on spherical microcomposites consisting of a polymer core coated with a triple layer of nickel-gold-silica. These composites are of high interest to the microelectronics industry, where they are applied in conducting adhesives as fine-pitch electrical contacts-which requires an exceptional degree of uniformity and reproducibility.

Laser recrystallization and inscription of compositional microstructures in crystalline SiGe-core fibres.

Glass fibres with silicon cores have emerged as a versatile platform for all-optical processing, sensing and microscale optoelectronic devices. Using SiGe in the core extends the accessible wavelength range and potential optical functionality because the bandgap and optical properties can be tuned by changing the composition. However, silicon and germanium segregate unevenly during non-equilibrium solidification, presenting new fabrication challenges, and requiring detailed studies of the alloy crystallization dynamics in the fibre geometry.

Wavefront metrology for coherent hard X-rays by scanning a microsphere.

Characterization of the wavefront of an X-ray beam is of primary importance for all applications where coherence plays a major role. Imaging techniques based on numerically retrieving the phase from interference patterns are often relying on an a-priori assumption of the wavefront shape. In Coherent X-ray Diffraction Imaging (CXDI) a planar incoming wave field is often assumed for the inversion of the measured diffraction pattern, which allows retrieving the real space image via simple Fourier transformation.

X-Ray Nanoscopy of a Bulk Heterojunction.

Optimizing the morphology of bulk heterojunctions is known to significantly improve the photovoltaic performance of organic solar cells, but available quantitative imaging techniques are few and have severe limitations. We demonstrate X-ray ptychographic coherent diffractive imaging applied to all-organic blends. Specifically, the phase-separated morphology in bulk heterojunction photoactive layers for organic solar cells, prepared from a 50:50 blend of poly(3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) and thermally treated for different annealing times is imaged to high resolution.

Using three-dimensional 3D grazing-incidence small-angle X-ray scattering (GISAXS) analysis to probe pore deformation in mesoporous silica films.

In the past decade, remarkable progress has been made in studying nanoscale objects deposited on surfaces by grazing-incidence small-angle X-ray scattering (GISAXS). However, unravelling the structural properties of mesostructured thin films containing highly organized internal three-dimensional (3D) structures remains a challenging issue, because of the lack of efficient algorithms that allow prediction of the GISAXS intensity patterns. Previous attempts to calculate intensities have mostly been limited to cases of two-dimensional (2D) assemblies of nanoparticles at surfaces, or have been adapted to specific 3D cases.

Substrate-induced variations of molecular packing, dynamics, and intermolecular electronic couplings in pentacene monolayers on the amorphous silica dielectric.

Charge-carrier transport in thin-film organic field-effect transistors takes place within the first (few) molecular layer(s) of the active organic material in contact with the gate dielectric. Here, we use atomistic molecular dynamics simulations to evaluate how interactions with bare amorphous silica surfaces that vary in terms of surface potential influence the molecular packing and dynamics of a monolayer pentacene film. The results indicate that the long axis of the pentacene molecules has a non-negligible tilt angle away from the surface normal.

Semi-metallic polymers.

Polymers are lightweight, flexible, solution-processable materials that are promising for low-cost printed electronics as well as for mass-produced and large-area applications. Previous studies demonstrated that they can possess insulating, semiconducting or metallic properties; here we report that polymers can also be semi-metallic. Semi-metals, exemplified by bismuth, graphite and telluride alloys, have no energy bandgap and a very low density of states at the Fermi level.

Two-dimensional GIWAXS reveals a transient crystal phase in solution-processed thermally converted tetrabenzoporphyrin.

Thermally convertible organic materials are useful for the fabrication of multilayered thin film electronic devices such as solar cells. However, substantial changes in molecular ordering can occur during the conversion process that may lead to multiple polymorphs having differing electronic properties. In-situ grazing incidence wide-angle X-ray scattering with 2-D detection (2-D GIWAXS) was used to study the changes in the thin film crystal structure, texture, and crystallite size of a convertible small-molecule electron donor, tetrabenzoporphyrin (BP), during thermal conversion from the precursor bicycloporphyrin (CP) and the resulting crystal-crystal phase transition from a metastable phase (phase I) to a stable phase (phase II).

Coexistence of helical morphologies in columnar stacks of star-shaped discotic hydrazones.

Discotic hydrazone molecules are of particular interest as they form discotic phases where the discs are rigidified by intramolecular hydrogen bonds. Here, we investigate the thermotropic behavior and solid-state organizations of three discotic hydrazone derivatives with dendritic groups attached to their outer peripheries, containing six, eight, and ten carbons of linear alkoxy chains. On the basis of two-dimensional wide angle X-ray scattering (2DWAXS), the elevated temperature liquid crystalline (LC) phases were assigned to a hexagonal columnar (Colh) organization with nontilted hydrazone discs for all three compounds.

Three-dimensional packing structure and electronic properties of biaxially oriented poly(2,5-bis(3-alkylthiophene-2-yl)thieno[3,2-b]thiophene) films.

We use a systematic approach that combines experimental X-ray diffraction (XRD) and computational modeling based on molecular mechanics and two-dimensional XRD simulations to develop a detailed model of the molecular-scale packing structure of poly(2,5-bis (3-tetradecylthiophene-2-yl)thieno[3,2-b]thiophene) (PBTTT-C(14)) films. Both uniaxially and biaxially aligned films are used in this comparison and lead to an improved understanding of the molecular-scale orientation and crystal structure. We then examine how individual polymer components (i.

Columnar self-assembly and alignment of planar carbenium ions in Langmuir-Blodgett films.

Structural and optical properties of multilayer Langmuir-Blodgett (LB) films of two amphiphilic carbenium salts 2-didecylamino-6,10-bis(dimethylamino)-4,8,12-trioxatriangulenium hexafluorophosphate (ATOTA-1) and 2,6-bis(decylmethylamino)-10-dimethylamino-4,8,12-trioxatriangulenium hexafluorophosphate (ATOTA-2) are described. The LB films were prepared on lipophilic glass by standard vertical dipping. Grazing incidence X-ray diffraction (GIXD) measurements show that the planar organic cores, in spite of their positive charge, form closely packed columns with a repeating distance of ∼3.

Understanding structure-mobility relations for perylene tetracarboxydiimide derivatives.

Discotic mesophases are known for their ability to self-assemble into columnar structures and can serve as semiconducting molecular wires. Charge carrier mobility along these wires strongly depends on molecular packing, which is controlled by intermolecular interactions. By combining wide-angle X-ray scattering experiments with molecular dynamics simulations, we elucidate packing motifs of a perylene tetracarboxdiimide derivative, a task which is hard to achieve by using a single experimental or theoretical technique.

Biaxially oriented CdSe nanorods.

The shape, structure, and orientation of rubbing-aligned cadmium selenide (CdSe) nanorods on polymer coated glass substrates have been studied using transmission electron microscopy (TEM) and grazing incidence X-ray scattering combined with computer simulations. The nanorods are found to be of wurtzite structure and highly monodisperse, and have an essentially ellipsoidal shape with short axes of approximately 8 nm and long axis of approximately 22 nm. The nanorods exhibit preferred biaxial orientation with the hexagonal a-c-plane parallel to the sample surface and the c-axis oriented along the rubbing direction of the sample.

Theoretical investigation of perylene dimers and excimers and their signatures in X-ray diffraction.

The structures of the ground and excimer states of perylene pairs are calculated [using density functional theory (DFT) and time-dependent DFT techniques] in a free as well as a crystal environment, and their spectroscopic properties are studied for the most stable configurations. The vertical transition energies for the absorption and emission bands are obtained, and they are in good agreement with experimental data. In these calculations, up to six excited states are considered.