Therapeutic Effects of Targeted PPARɣ Activation on Inflamed High-Risk Plaques Assessed by Serial Optical Imaging In Vivo.

Atherosclerotic plaque is a chronic inflammatory disorder involving lipid accumulation within arterial walls. In particular, macrophages mediate plaque progression and rupture. While PPARγ agonist is known to have favorable pleiotropic effects on atherogenesis, its clinical application has been very limited due to undesirable systemic effects.

Processable high internal phase Pickering emulsions using depletion attraction.

High internal phase emulsions have been widely used as templates for various porous materials, but special strategies are required to form, in particular, particle-covered ones that have been more difficult to obtain. Here, we report a versatile strategy to produce a stable high internal phase Pickering emulsion by exploiting a depletion interaction between an emulsion droplet and a particle using water-soluble polymers as a depletant. This attractive interaction facilitating the adsorption of particles onto the droplet interface and simultaneously suppressing desorption once adsorbed.

Note: Development of a compact aperture-type XYθz positioning stage.

In this paper, we propose a new in-plane XYθz nano-positioning stage that utilizes piezoelectric actuators and flexure mechanisms. The proposed stage has an aperture and is compact, which facilitates its application in measurement equipment, especially those used for biological specimens. The stage has four piezoelectric actuators and four bridge-type flexure mechanisms, which are used to amplify the small motions produced by the piezoelectric actuators.

Intravascular optical imaging of high-risk plaques in vivo by targeting macrophage mannose receptors.

Macrophages mediate atheroma expansion and disruption, and denote high-risk arterial plaques. Therefore, they are substantially gaining importance as a diagnostic imaging target for the detection of rupture-prone plaques. Here, we developed an injectable near-infrared fluorescence (NIRF) probe by chemically conjugating thiolated glycol chitosan with cholesteryl chloroformate, NIRF dye (cyanine 5.

High-speed 3-D measurement with a large field of view based on direct-view confocal microscope with an electrically tunable lens.

We propose a new structure of confocal imaging system based on a direct-view confocal microscope (DVCM) with an electrically tunable lens (ETL). Since it has no mechanical moving parts to scan both the lateral (x-y) and axial (z) directions, the DVCM with an ETL allows for high-speed 3-dimensional (3-D) imaging. Axial response and signal intensity of the DVCM were analyzed theoretically according to the pinhole characteristics.

Intracoronary dual-modal optical coherence tomography-near-infrared fluorescence structural-molecular imaging with a clinical dose of indocyanine green for the assessment of high-risk plaques and stent-associated inflammation in a beating coronary artery.

Aims: Inflammation plays essential role in development of plaque disruption and coronary stent-associated complications. This study aimed to examine whether intracoronary dual-modal optical coherence tomography (OCT)-near-infrared fluorescence (NIRF) structural-molecular imaging with indocyanine green (ICG) can estimate inflammation in swine coronary artery.

Methods And Results: After administration of clinically approved NIRF-enhancing ICG (2.

Fiber-optic raster scanning two-photon endomicroscope using a tubular piezoelectric actuator.

A nonresonant, fiber-optic raster scanning endomicroscope was developed using a quarter-tubular piezoelectric (PZT) actuator. A fiber lever mechanism was utilized to enhance the small actuation range of the tubular PZT actuator and to increase its field-of-view. Finite element method simulation of the endoscopic probe was conducted for various conditions to maximize its scanning range.

Optimal design and experiment of a three-axis out-of-plane nano positioning stage using a new compact bridge-type displacement amplifier.

This paper presents the development of a new compact three-axis compliant stage employing piezoelectric actuators and a new flexure structure. A proposed stage works out-of-plane (Z, θx, θy) direction. The stage consists of 4 amplification flexures mounted piezoelectric actuators.

Dual-detection confocal fluorescence microscopy: fluorescence axial imaging without axial scanning.

We propose a new method for high-speed, three-dimensional (3-D) fluorescence imaging, which we refer to as dual-detection confocal fluorescence microscopy (DDCFM). In contrast to conventional beam-scanning confocal fluorescence microscopy, where the focal spot must be scanned either optically or mechanically over a sample volume to reconstruct a 3-D image, DDCFM can obtain the depth of a fluorescent emitter without depth scanning. DDCFM comprises two photodetectors, each with a pinhole of different size, in the confocal detection system.

Chromatic confocal microscopy with a novel wavelength detection method using transmittance.

Chromatic confocal microscopy (CCM) is a promising technology that enables high-speed three-dimensional surface profiling without mechanical depth scanning. However, the spectrometer, which measures depth information encoded by axial color, limits the speed of three-dimensional imaging. We present a novel method for chromatic confocal microscopy with transmittance detection.

Design and demonstration of multimodal optical scanning microscopy for confocal and two-photon imaging.

We developed a multimodal microscopy based on an optical scanning system in order to obtain diverse optical information of the same area of a sample. Multimodal imaging researches have mostly depended on a commercial microscope platform, easy to use but restrictive to extend imaging modalities. In this work, the beam scanning optics, especially including a relay lens, was customized to transfer broadband (400-1000 nm) lights to a sample without any optical error or loss.

Design and optimization of voice coil actuator for six degree of freedom active vibration isolation system using Halbach magnet array.

This paper describes the design, modeling, optimization, and validation of an active vibration isolation system using a voice coil motor. The active vibration isolating method was constructed with a passive isolator and an active isolator. A spring was used for passive isolating; an actuator was used for active isolating.

An integrated allele-specific polymerase chain reaction-microarray chip for multiplex single nucleotide polymorphism typing.

An integrated allele-specific polymerase chain reaction (AS PCR) and microarray chip has been developed for multiplex single nucleotide polymorphism (SNP) typing on a portable genetic analyzer instrumentation. We applied the integrated PCR-microarray system for on-site Hanwoo (Korean indigenous beef cattle) identification. Eleven sets of primers were designed, among which ten sets of primers targeted ten SNP loci to discriminate Hanwoo from the imported beef cattle and one primer set was used as a positive PCR control.

Spectrally resolved fluorescence lifetime imaging microscope using tunable bandpass filters.

A simple structure of spectral fluorescence lifetime imaging microscope (SLIM) is designed with the use of tunable bandpass filter, a kind of Fabry-perot filter that transmission wavelength is varying according to incident angle of light. Feasibility tests of this angle-tuned bandpass filter (ATBF) are performed and it shows high transmission and constant spectral bandwidth (20 nm) with respect to angle of incidence. Furthermore, using two ATBFs in series, spectral bandwidth can be adjustable down to 4 nm.

Development of a compact and long range XYθ(z) nano-positioning stage.

In this study, we describe the development of a novel, compact, and long range in-plane XYθ(z) nano-positioning stage with piezoelectric actuator and flexure mechanism. The stage is composed of an X-directional motion part and a Y, θ(z)-directional motion part, which are linked serially. The stage consists of a bridge-type amplifying mechanism for the amplification of deformation of the piezoelectric actuator, a double compound guide mechanism for performing only desired motion, and a circular hinge mechanism that permits rotational motion in the Y and θ(z)-stages.

Development of a novel 3-degrees of freedom flexure based positioning system.

Flexure mechanisms have been widely used for nanometer positioning systems. This article presents a novel conceptual design of an ultra-precision 3-degrees of freedom (XYθ(Z)) positioning system with nanometer precision. The main purpose of this novel stage design is for the application of measurement equipment, in particular biological specimens.

Design and analysis of multi-color confocal microscopy with a wavelength scanning detector.

Spectral (or multi-color) microscopy has the ability to detect the fluorescent light of biological specimens with a broad range of wavelengths. Currently, the acousto-optic tunable filter (AOTF) is widely used in spectral microscopy as a substitute for a multiple-dichroic mirror to divide excitation and emission signals while maintaining sufficient light efficiency. In addition, systems which utilize an AOTF have a very fast switching speed and high resolution for wavelength selection.

Integrated allele-specific polymerase chain reaction-capillary electrophoresis microdevice for single nucleotide polymorphism genotyping.

An integrated allele-specific (AS) polymerase chain reaction (PCR) and capillary electrophoresis (CE) microdevice has been developed for multiplex single nucleotide polymorphism (SNP) genotyping on a portable instrumentation, which was applied for on-site identification of HANWOO (Korean indigenous beef cattle). Twelve sets of primers were designed for targeting beef cattle's eleven SNP loci for HANWOO verification and one primer set for a positive PCR control, and the success rate for identification of HANWOO was demonstrated statistically. The AS PCR and CE separation for multiplex SNP typing was carried out on a glass-based microchip consisting of four layers: a microchannel plate for microfluidic control, a Pt-electrode plate for a resistance temperature detector (RTD), a poly(dimethylsiloxane) (PDMS) membrane and a manifold glass for microvalve function.

Development of flexure based 6-degrees of freedom parallel nano-positioning system with large displacement.

This paper details the development of a novel flexure jointed precision parallel nano-positioning system in combination with piezo-electric stepping motor for the application of precise optics alignment. The characteristics of the developed system are evaluated in this paper by the simulation and experiments. Based on the precision piezo-electric stepping motor and flexure joints, a high precision motion is obtained.

Polarization-sensitive spectral-domain optical coherence tomography using a multi-line single camera spectrometer.

We describe a polarization sensitive spectral domain optical coherence tomography technique based on a single camera spectrometer that includes a multiplexed custom grating, camera lenses, and a high-speed three-line CCD camera. Two orthogonally polarized beams could be separately taken by two lines of the camera as a result of vertically different incident angles. The system could provide the imaging capabilities of a full camera speed and increased measurable depth.

Three-dimensional surface profile measurement using a beam scanning chromatic confocal microscope.

In this research, chromatic confocal microscopy with transverse point beam scanning is constructed for three-dimensional surface measurement without longitudinal mechanical translation. In beam scanning chromatic confocal microscopy, the wavelength-to-depth relation and the lateral field of view should be determined considering the beam scanning angle. With the experimental results from a sample structure, the three-dimensional profile is reconstructed by relating the wavelength and scanning angle to the axial and the lateral coordinates.

A new magnetic bearing using Halbach magnet arrays for a magnetic levitation stage.

Next-generation lithography requires a high precision stage, which is compatible with a high vacuum condition. A magnetic levitation stage with six degrees-of-freedom is considered state-of-the-art technology for a high vacuum condition. The noncontact characteristic of magnetic levitation enables high precision positioning as well as no particle generation.

Design and control of a nanoprecision XY Theta scanner.

This paper describes the design and control of a nanoprecision XY Theta scanner consisting of voice coil motors and air bearing guides. The proposed scanner can be installed on a conventional XY stage with long strokes to improve the positioning accuracy and settling performance. Major design considerations in developing a high precision scanner are sensor accuracy, actuator properties, structural stability, guide friction, and thermal expansion.

Development of compact high precision two degree of freedom XY piezoelectric stepping positioner.

In this article, a linear piezoelectric stepping positioner developed by Kang et al. [Rev. Sci.