Nerve bundle formation during the promotion of peripheral nerve regeneration: collagen VI-neural cell adhesion molecule 1 interaction.

The formation of nerve bundles, which is partially regulated by neural cell adhesion molecule 1 (NCAM1), is important for neural network organization during peripheral nerve regeneration. However, little is known about how the extracellular matrix (ECM) microenvironment affects this process. Here, we seeded dorsal root ganglion tissue blocks on different ECM substrates of peripheral nerve ECM-derived matrix-gel, Matrigel, laminin 521, collagen I, and collagen IV, and observed well-aligned axon bundles growing in the peripheral nerve ECM-derived environment.

The effect of a nanofiber-hydrogel composite on neural tissue repair and regeneration in the contused spinal cord.

An injury to the spinal cord causes long-lasting loss of nervous tissue because endogenous nervous tissue repair and regeneration at the site of injury is limited. We engineered an injectable nanofiber-hydrogel composite (NHC) with interfacial bonding to provide mechanical strength and porosity and examined its effect on repair and neural tissue regeneration in an adult rat model of spinal cord contusion. At 28 days after treatment with NHC, the width of the contused spinal cord segment was 2-fold larger than in controls.

Tissue engineering for the repair of peripheral nerve injury.

Peripheral nerve injury is a common clinical problem and affects the quality of life of patients. Traditional restoration methods are not satisfactory. Researchers increasingly focus on the field of tissue engineering.

Spatial distribution affects the role of CSPGs in nerve regeneration via the actin filament-mediated pathway.

CSPGs are components of the extracellular matrix in the nervous system, where they serve as cues for axon guidance during development. After a peripheral nerve injury, CSPGs switch roles and become axon inhibitors and become diffusely distributed at the injury site. To investigate whether the spatial distribution of CSPGs affects their role, we combined in vitro DRG cultures with CSPG stripe or coverage assays to simulate the effect of a patterned substrate or dispersive distribution of CSPGs on growing neurites.

A comparative study of gelatin sponge scaffolds and PLGA scaffolds transplanted to completely transected spinal cord of rat.

This study sought to investigate whether gelatin sponge (GS) scaffold would produce less acidic medium in injured spinal cord, as compared with poly(lactic-co-glycolic acid) (PLGA) scaffold, to determine which of the two scaffolds as the biomaterial is more suitable for transplantation into spinal cord. GS scaffold or PLGA scaffold was transplanted into a transected spinal cord in this study. Two months after transplantation of scaffolds, acid sensing ion channel 1a (ASIC1a) positive cells expressing microtubule associated protein 2 (Map2) were observed as well as expressing adenomatous polyposis coli (APC) in spinal cord.

[Fabrication of tissue engineered vein containing valve scaffolds].

Objective: To fabricate porous biodegradable tissue engineered vein containing valve scaffolds.

Methods: Based on the self-made cast, the tissue engineered vein containing valve scaffolds was fabricated by injection molding plus thermally induced phase separation. Poly (lactic-co-glycolic acid) (PLGA, LA/GA mole ratio 75:25) was used as matrices.

Coseeded Schwann cells myelinate neurites from differentiated neural stem cells in neurotrophin-3-loaded PLGA carriers.

Biomaterials and neurotrophic factors represent promising guidance for neural repair. In this study, we combined poly-(lactic acid-co-glycolic acid) (PLGA) conduits and neurotrophin-3 (NT-3) to generate NT-3-loaded PLGA carriers in vitro. Bioactive NT-3 was released stably and constantly from PLGA conduits for up to 4 weeks.

Neurotrophin-3 gene-modified Schwann cells promote TrkC gene-modified mesenchymal stem cells to differentiate into neuron-like cells in poly(lactic-acid-co-glycolic acid) multiple-channel conduit.

Rapid progress in the field of nerve tissue engineering has opened up the way for new therapeutic strategies for spinal cord injury (SCI). Bone marrow-derived mesenchymal stem cells (MSCs) could be differentiated into neural lineages, which can be used as a potential cell source for nerve repair. Schwann cells (SCs) have been reported to support structural and functional recovery of SCI.

Transplantation of artificial neural construct partly improved spinal tissue repair and functional recovery in rats with spinal cord transection.

Delivery of cellular and/or trophic factors to the site of injury may promote neural repair or axonal regeneration and return of function after spinal cord injury. Engineered scaffolds provide a platform to deliver therapeutic cells and neurotrophic molecules. To explore therapeutic potential of engineered neural tissue, we generated an artificial neural construct in vitro, and transplanted this construct into a completely transected spinal cord of adult rats.

Bone induction by biomimetic PLGA-(PEG-ASP)n copolymer loaded with a novel synthetic BMP-2-related peptide in vitro and in vivo.

BMP-2 is one of the most important growth factors of bone regeneration. Polylactide-co-glycolic acid (PLGA), which is used as a biodegradable scaffold for delivering therapeutic agents, has been intensively investigated. In previous studies, we synthesized a novel BMP-2-related peptide (designated P24) and found that it could enhance the osteoblastic differentiation of bone marrow stromal cells (BMSCs).

Synaptic transmission of neural stem cells seeded in 3-dimensional PLGA scaffolds.

To explore therapeutic potential of engineered neural tissue, we combined genetically modified neural stem cells (NSCs) and poly(lactic acid-co-glycolic acid) (PLGA) polymers to generate an artificial neural network in vitro. NSCs transfected with either NT-3 or its receptor TrkC gene were seeded into PLGA scaffold. The NSCs were widely distributed and viable in the scaffold after culturing for 14 days.

Preliminary study of the effect of FK506 nanospheric-suspension eye drops on rejection of penetrating keratoplasty.

Objective: The aim of this study was to investigate the effect of a topical FK506 nanospheric suspension in a rat model of penetrating keratoplasty.

Methods: FK506 nanospheres were prepared by using a biodegradable poly (lactic-co-glycolic acid) copolymer (PLGA). Its distribution in the eye and blood after a single instillation was examined in rabbits.

Preparation and characterization of cationic chitosan-modified poly(D,L-lactide-co-glycolide) copolymer nanospheres as DNA carriers.

Chitosan (CS)-modified poly(D,L-lactide-co-glycolide) (PLGA/CS) nanoparticles with cationic surface were prepared by means of emulsion-solvent evaporation technique using polyviny alcohol and chitosan as costabilizers. The preparation conditions of the cationic nanoparticles were optimized by orthogonal factorial design, and the influences of the experiment variables such as polymer concentration, the molecular weight of chitosan, etc., on the size and zeta potential of the nanoparticles were evaluated.

Biodegradable chitosan scaffolds containing microspheres as carriers for controlled transforming growth factor-beta1 delivery for cartilage tissue engineering.

Background: Natural articular cartilage has a limited capacity for spontaneous regeneration. Controlled release of transforming growth factor-beta1 (TGF-beta1) to cartilage defects can enhance chondrogenesis. In this study, we assessed the feasibility of using biodegradable chitosan microspheres as carriers for controlled TGF-beta1 delivery and the effect of released TGF-beta1 on the chondrogenic potential of chondrocytes.

[Bone defect repair with a new tissue-engineered bone carrying bone morphogenetic protein in rabbits].

Objective: To construct a new tissue-engineered bone with poly (D, L-lactide-co-glycolide) (PLGA), bone morphogenetic protein (BMP) and bone marrow-derived stem cells (BMSCs) and observe its effect in repairing segmental bone defects.

Methods: A 15-mm bone defect in the right radius was induced in New Zealand white rabbits, and the models were randomized into three groups to receive implantation of the tissue-engineered bone grafts constructed with PLGA carrying 5 mg BMP and about 1 x 10(6) BMSCs (experimental group), grafts of PLGA with about 1 x 10(6) BMSCs (control group), or grafts of exclusive PLGA (blank control group), respectively. The osteogenesis in the bone defect after the implantation on was evaluated X-ray films, and the histological changes of the tissues sampled from the bone defect 4, 8, and 12 weeks after operation were observed and new bone formation was measured by image analysis.

[In vitro degradation and subsequent biomechanical changes of poly(lactide-co-glycolide) scaffolds prepared by mild heating under high pressure].

Objective: To study the changes in biomechanics and such indices as intrinsic viscosity poly (lactide-co-glycolide) (PLGA) scaffolds produced by mild heating under high pressure after in vitro degradation.

Methods: PLGA scaffolds with the porosity of 90.0% and 92.

Effect of pore size of D, L-polylactic acid as bone repair material on bone regeneration.

Objective: To study the bone regeneration behavior in porous D,L-polylactic acid (D,L-PLA) with different pore sizes.

Method: A particulate-leaching method was employed to prepare porous biodegradable D,L-PLA with different pore sizes (75, 250, 400, 750 micrometer) and with porosity of 75% as the materials to repair bone defects in rabbits. The materials were then implanted at random into 40 rabbits with bilateral radius bone defect, leaving another 10 rabbits without implantation as blank control.

[Analysis of three-dimensional microstructure of poly(lactide-co-glycolide) scaffolds made by mild heating under high pressure].

Objective: To develop a poly(lactide-co-glycolide)(PLGA) copolymer scaffold with good three-dimensional microstructure and free of organic solvent, which can be used in bone repairing for tissue engineering, and to explore a novel method for developing polymeric scaffolds.

Methods: The polymer and sodium chloride were ground to powder and mixed in 2 different proportions as the materials for preparing the scaffolds by mild heating under high pressure. The porosity and the ratio of open pores in the product were analyzed in light of its density and by sodium chloride approaches, with the pore size, surface and internal structures examined under scanning electron microscope (SEM).