High power single-frequency 1112 nm laser by an insertable Nd:YAG/YAG bonded monolithic planar ring oscillator.

A high power single-frequency operation at 1112 nm with novel insertable monolithic planar ring oscillator based on a Nd:YAG/YAG bonded crystal is proposed. In a proof-of-principle experiment, a finely designed coating on the output surface is carried out to ensure single-wavelength oscillation at 1112 nm, together with a half-wave plate and a TbGaO crystal inserted in the open space of the bonded block to realize the unidirectional operation with power scalability. Consequently, the single-frequency laser delivers an output power of 3.

Compact integrated aberration-compensating module for a 9 kW Nd:YAG slab laser based on an off-axis stable-unstable resonator.

An integrated aberration-compensating module (IACM), consisting mainly of an adjustable slab-aberration compensator, a one-dimensional Shack-Hartmann wavefront sensor, and a data processor, which meet the urgent requirements of correcting the specific wavefront aberrations of a slab laser based on an off-axis stable-unstable resonator, is designed and experimentally demonstrated. Benefits include compactness, robustness, simplicity, automation, and cost-effectiveness. The particular wavefront aberrations of the 9 kW level quasi-continuous-wave Nd:YAG slab laser, which have characteristics of asymmetry, large amplitude and gradient, high spatial frequency, and low temporal frequency, were measured and theoretically analyzed.

QCW surface-pumped cryogenically cooled single-slab laser with 1 kW level at 946 nm.

We present a kilowatt-level quasi-continuous-wave (QCW) cryogenically cooled 946-nm slab laser oscillator for the first time, to the best of our knowledge. The laser system is based on a double-face-pumped large-size single-slab Nd:YAG design, delivering a record-high average power of 1.06 kW without additional amplification.

Primary aberration optimization for double-plane symmetric beam shaping systems using a pair of curved reference surfaces.

The geometric aberration of centered refracting double-plane symmetric optical systems (DPSOS) is investigated. For DPSOS with different defocus values in the tangential plane and the sagittal plane (astigmatic wavefront), a pair of curved reference surfaces which vanishes the quadratic terms of the optical path difference (OPD) between a general ray and a reference ray are deduced. With the curved reference surfaces, the primary (fourth-order) wave aberration function for DPSOS is calculated and analyzed, which can be used for beam shaping designs with astigmatic input wavefront, such as slab lasers and semiconductor lasers.

1.53 W all-solid-state nanosecond pulsed mid-infrared laser at 6.45 µm.

A compact and robust all-solid-state mid-infrared (MIR) laser at 6.45 µm with high average output power and near-Gaussian beam quality is demonstrated. A maximum output power of 1.

Simplified analytical method for an anamorphic refractive shaping system of laser beams with a large aspect ratio.

For reshaping aperture size and correcting low-order aberration of laser beams with large aspect ratios, a simplified analytical method is proposed to design an anamorphic refractive shaping system, which is composed of double-plane symmetric lenses. The simplified method enables performing a global study of aberrations via calculating the analytical primary wave aberration function under paraxial approximation. The aberration balance is analyzed with a three-lens laser collimating system and a compact four-lens laser expanding system.

High-repetition-rate 100 W level sodium beacon laser for a multi-conjugate adaptive optics system.

A 100 W level kilohertz repetition-rate microsecond (µs)-pulse all-solid-state sodium beacon laser at 589 nm is demonstrated for the first time, to the best of our knowledge, via combining two independent µs-pulsed lasers. Each beamlet is generated by the sum-frequency mixing of pulsed 1064 and 1319 nm lasers in a lithium triborate (LBO) crystal, which operate at 500 Hz pulse repetition frequency with 61 W $p$p-polarized and 53 W $s$s-polarized output, respectively. An incoherent sequence combining technology of polarized laser beams is employed to add the two beamlets.

Dual-wavelength TEM mode passively mode-locked Nd:YAG laser witha semiconductor saturable absorber mirror.

A dual-wavelength ${{\rm TEM}_{01}}$TEM mode synchronous continuous wave passively mode-locked (CWML) Nd:YAG laser has been demonstrated for the first time to the best of our knowledge with a semiconductor saturable absorber mirror (SESAM) at 1319 and 1338 nm. The maximum average output power of 10.84 W was obtained at a 113.

Pulse duration adjusted by changing the cavity length with a multi-pass cavity in a Q-switched Nd:YAG laser.

We report a compact, long nanosecond (ns) pulse duration stretched laser source by a multi-pass cavity (MPC). Based on the combination of the MPC and pump power, a high-power high beam quality 1064 nm Q-switched Nd:YAG laser with a pulse duration adjustable over the range of 160-1000 ns was obtained at a pulse repetition frequency of 10 kHz for the first time, to the best of our knowledge. At a typical pulse width of 560 ns, an average output power of 10.

Watt level laser source for a polychromatic laser guide stars: double resonant fluorescence from 3S-3P-3D transition of sodium atoms.

The polychromatic laser guide star (PLGS) is one of the solutions proposed to measure the differential atmospheric tip-tilt. A watts-level microsecond pulse all solid state laser source with two wavelengths at 589 and 819.7 nm are developed to perform a proof-of-concept on-sky test for what is believed to be the first time.

Picosecond slab regenerative amplifier using a large fundamental mode stable-unstable hybrid cavity.

Slab gain media with large aspect ratios were difficult to be adopted in ultrafast regenerative amplifiers (RAs) due to the obstacle of mode matching with the seed beam. We proposed that an unstable cavity could be employed to solve this difficulty by taking the advantage of its large fundamental mode volume. In this way, an Nd:YVO slab-based picosecond RA has been successfully demonstrated using a stable-unstable hybrid cavity.

High-energy single-frequency 167 nm deep-ultraviolet laser.

We report a high-energy single-frequency deep-ultraviolet (DUV) solid-state laser at 167.079 nm by the eighth-harmonic generation of a diode-pumped Nd:LGGG laser. A maximum DUV laser output energy of 1.

30.5-μJ, 10-kHz, picosecond optical parametric oscillator pumped synchronously and intracavity by a regenerative amplifier.

We have proposed a novel approach to realize a high-energy ultrafast optical parametric oscillator (OPO) by intracavity pumping in a regenerative amplifier. In this way, we have experimentally demonstrated an unprecedented pulse energy of 30.5 μJ from a 1.

Pulse width adjustable Q-switched cavity dumped laser by rotating a quarter-wave plate and a Pockels cell.

A pulse width adjustable 1064 nm Q-switched cavity dumped Nd:YVO laser was realized for the first time, to the best of our knowledge, by rotating an intracavity quarter-wave plate (QWP) and a Pockels cell (PC). The pulse width adjustment range was 4.8-7.

Picosecond mid-infrared optical parametric amplifier based on LiInSe with tenability extending from 3.6 to 4.8 μm.

A picosecond (ps) mid-infrared (MIR) optical parametric amplifier (OPA) with LiInSe crystal was demonstrated for the first time. The MIR OPA was pumped by a 30 ps 1064 nm Nd:YAG laser and injected by a barium boron oxide (BBO)-based widely tunable near-infrared seed. A maximum idler pulse energy of 433 μJ at 4 μm has been obtained under a pump energy of 17 mJ, and the corresponding pulse duration was estimated to be ~13 ps.

High-power QCW microsecond-pulse solid-state sodium beacon laser with spiking suppression and D2b re-pumping.

A 65 W quasi-continuous-wave microsecond-pulse solid-state sodium beacon laser tuned to the sodium D2a line has been developed with a linewidth of 0.3 GHz, beam quality of M2=1.38, and pulse width of 120 μs at a repetition rate of 500 Hz by sum-frequency mixing 1319 and 1064 nm diode-pumped Nd:YAG master-oscillator power-amplifier systems.

Efficient optical image amplifier using periodically poled lithium niobate.

An efficient optical image amplification scheme has been proposed and demonstrated using the quasi-phase-matched optical parametric amplifier. Pumped with the 152 μJ per pulse pump laser at 532 nm, the input weak infrared image at 1064 nm with 3.5 pJ energy is amplified with a 55 dB optical gain using only a 3 mm long MgO-doped periodically poled lithium niobate (MgO:PPLN) crystal.

Low-timing-jitter high-power mode-locked 1063 nm Nd:GdVO₄ master oscillator power amplifier.

A low-timing-jitter high-power semiconductor saturable absorber mirror mode-locked picosecond (ps) 1063 nm Nd:GdVO4 master oscillator power amplifier is presented. Using a single-pass Nd:GdVO4 amplifier, an amplified laser with 21.5 W output power and 8.

8.2 kW high beam quality quasi-continuous-wave face-pumped Nd:YAG slab amplifier.

An 8 kW level quasi-continuous-wave (QCW) face-pumped 1064 nm slab laser with high beam quality was developed by a master oscillator power amplifier (MOPA) system. A single-mode fiber seed laser was amplified by two-stage single-pass Nd:YAG rod preamplifiers and four face-pumped Nd:YAG slab amplifiers. The slab amplifiers were well designed with uniform pumping and uniform cooling for well-distributed thermal and stress.

167.75-nm vacuum-ultraviolet ps laser by eighth-harmonic generation of a 1342-nm Nd:YVO4 amplifier in KBBF.

We demonstrate a ps 167.75-nm vacuum-ultraviolet (VUV) laser by cascaded second-harmonic generation (SHG). The VUV laser is produced by eighth-harmonic generation (EHG) of a mode-locked ps 1342-nm Nd:YVO4 amplifier through three stages cascaded SHG with two LiB3O5 crystals and one KBe2BO3F2 crystal, successively.

7.6 W 1342 nm passively mode-locked picosecond composite Nd:YVO4/YVO4 laser with a semiconductor saturable absorber mirror.

A high average power 1342 nm passively CW mode-locked picoseconds (ps) composite Nd:YVO4 laser was demonstrated with a semiconductor saturable absorber mirror (SESAM). The oscillator cavity was carefully designed to optimize the laser beam radii in the crystal and on the SESAM. The combination of composite bonded laser crystal, direct pumping, and dual end-pumped configuration was adopted to reduce the thermal effect and produce high output power with high beam quality.

Sub-pm linewidth nanosecond Nd:GYSGG laser at 1336.6 nm.

We demonstrate a sub-pm linewidth acousto-optic (AO) Q-switched nanosecond Nd:GYSGG ring laser at 1336.6 nm side-pumped by 808-nm quasi-continuous wave (QCW) diode lasers for the first time. With incident pulse energy of 4.

Comparison of laser induced thermal fracture between polycrystalline ceramic and crystal Nd:YAG.

Continuous wave 808 nm pump laser-induced thermal damage of polycrystalline transparent ceramic and crystalline Nd:YAG materials was investigated both experimentally and theoretically. The measured temperature agrees well with the theoretical simulation, and the maximum hoop stresses occur on the incident facet of the end-pumped rod at about √2 times of the pump beam radius w0, where the temperature gradient is the highest and the damage occurs first at this location. The fracture-limited laser intensity of ceramics was experimentally measured to be 6.

High efficiency and high peak power picosecond mid-infrared optical parametric amplifier based on BaGa4Se7 crystal.

A high efficiency and high peak power picosecond (ps) mid-infrared optical parametric amplifier with a new nonlinear crystal BaGa(4)Se(7) pumped by a 30 ps 1064 nm Nd:YAG laser is demonstrated for the first time. The maximum photon conversion efficiency of 56% from 1064 nm to 3.9 μm idler has been achieved at the pump energy of ~1.

High-power narrow-linewidth quasi-CW diode-pumped TEM00 1064 nm Nd:YAG ring laser.

We demonstrated a high average power, narrow-linewidth, quasi-CW diode-pumped Nd:YAG 1064 nm laser with near-diffraction-limited beam quality. A symmetrical three-mirror ring cavity with unidirectional operation elements and an etalon was employed to realize the narrow-linewidth laser output. Two highly efficient laser modules and a 90° quartz rotator for birefringence compensation were used for the high output power.