Dihydroxypropyl Chitosan: A Biorenewable Platform for the Design of Novel Fabric Care Additives.

The design of more sustainable and eco-friendly solutions is one of the central challenges in the formulation of today's laundry products. Water-soluble polymers are indispensable additives in laundry detergents as they play a wide range of functions. At present, the vast majority of these are still produced from petrochemical resources.

The polymer and materials science of the bacterial fimbriae Caf1.

Fimbriae are long filamentous polymeric protein structures located upon the surface of bacteria. Often implicated in pathogenicity, the biosynthesis and function of fimbriae has been a productive topic of study for many decades. Evolutionary pressures have ensured that fimbriae possess unique structural and mechanical properties which are advantageous to bacteria.

Bond Strength and Adhesion Mechanisms of Novel Bone Adhesives.

Bone adhesives offer distinct advantages over the use of screws to attached internal fixation plates (IFPs). As the chemical composition of bone is similar to dentine, it is possible that the types of monomers used to make dentine adhesives could be utilised to affix IFPs to bone. The ability to attach a bio-resorbable IFP to porcine bone was assessed for the monomer 10-methacryloyloxydecyl dihydrogen phosphate (MDP), used either as a homopolymer or a copolymer with urethane dimethacrylate (MDP + U).

Evaluating the Role of Hydrophobic and Cationic Appendages on the Laundry Performance of Modified Hydroxyethyl Celluloses.

Soil-release polymers (SRPs) are essential additives of laundry detergents whose function is to enable soil release from fabric and to prevent soil redeposition during the washing cycle. The currently used SRPs are petrochemical-based; however, SRPs based on biorenewable polymers would be preferred from an environmental and regulatory perspective. To explore this possibility, we have synthesized SRPs based on hydroxyethyl cellulose (amphiphilic HEC) appended with controlled compositions of hydrophobic and cationic appendages and assessed their cleaning abilities.

Exploiting Meltable Protein Hydrogels to Encapsulate and Culture Cells in 3D.

There is a growing realization that 3D cell culture better mimics complex in vivo environments than 2D, lessening aberrant cellular behaviors and ultimately improving the outcomes of experiments. Chemically crosslinked hydrogels which imitate natural extracellular matrix (ECM) are proven cell culture platforms, but the encapsulation of cells within these hydrogel networks requires bioorthogonal crosslinking chemistries which can be cytotoxic, synthetically demanding, and costly. Capsular antigen fragment 1 (Caf1) is a bacterial, polymeric, fimbrial protein which can be genetically engineered to imitate ECM.

Key reaction components affect the kinetics and performance robustness of cell-free protein synthesis reactions.

Cell-free protein synthesis (CFPS) reactions have grown in popularity with particular interest in applications such as gene construct prototyping, biosensor technologies and the production of proteins with novel chemistry. Work has frequently focussed on optimising CFPS protocols for improving protein yield, reducing cost, or developing streamlined production protocols. Here we describe a statistical Design of Experiments analysis of 20 components of a popular CFPS reaction buffer.

Exploiting the Structural Metamorphosis of Polymers to 'Wrap' Micron-Sized Spherical Objects.

There is growing interest in developing methods to 'wrap' nano- and micron-sized biological objects within films that may offer protection, enhance their stability or improve performance. We describe the successful 'wrapping' of lectin-decorated microspheres, which serve as appealing model micron-sized objects, within cross-linked polymer film. This approach utilizes polymer chains able to undergo a structural metamorphosis, from being intramolecularly cross-linked to intermolecularly cross-linked, a process that is triggered by polymer concentration upon the particle surface.

Probing the oligomeric re-assembling of bacterial fimbriae in vitro: a small-angle X-ray scattering and analytical ultracentrifugation study.

Capsular antigen fragment 1 (Caf1) is an oligomeric protein consisting of 15 kDa monomeric subunits that are non-covalently linked through exceptionally strong and kinetically inert interactions into a linear polymer chain. It has been shown that after its thermal depolymerisation into unfolded monomeric subunits, Caf1 is able to efficiently repolymerise in vitro to reform its polymeric structure. However, little is known about the nature of the repolymerisation process.

Hydrogels of engineered bacterial fimbriae can finely tune 2D human cell culture.

Demand continues to grow for biomimetic materials able to create well-defined environments for modulating the behaviour of living cells in culture. Here, we describe hydrogels based upon the polymeric bacterial fimbriae protein capsular antigen fragment 1 (Caf1) that presents tunable biological properties for enhanced tissue cell culture applications. We demonstrate how Caf1 hydrogels can regulate cellular functions such as spreading, proliferation and matrix deposition of human dermal fibroblast cells (hDFBs).

Cell-free protein synthesis in hydrogel materials.

We report a method for embedding cell-free protein synthesis reactions in macro-scale hydrogel materials without a free liquid phase. This paper focuses on methods of preparation for a variety of hydrogels and an investigation of the impact that the hydrogel material has on cell-free protein synthesis.

Enhancing the kinetics of hydrazone exchange processes: an experimental and computational study.

The capacity of hydrazone bonds to readily undergo component exchange processes sees their extensive utilization in dynamic combinatorial chemistry. The kinetics of hydrazone exchange are optimal at pH ∼4.5, which limits the use of hydrazone-based dynamic combinatorial libraries, particularly for biological targets which are only stable at near-neutral pH values.

Tuneable hydrogels of Caf1 protein fibers.

Capsular antigen fraction 1 (Caf1) is a robust polymeric protein forming a protective layer around the bacterium Yersinia pestis. Occurring as ≈1 μm polymeric fibers, it shares its immunoglobulin-like fold with the majority of mammalian extracellular proteins such as fibronectin and this structural similarity suggests that this unusual polymer could form useful mimics of the extracellular matrix. Driven by the pressing need for reliable animal-free 3D cell culture environments, we showed previously that recombinant Caf1 produced in Escherichia coli can be engineered to include bioactive peptides, which influence cell behavior.

Marine antifouling performance of polymer coatings incorporating zwitterions.

Zwitterionic materials display antifouling promise, but their potential in marine anti-biofouling is still largely unexplored. This study evaluates the effectiveness of incorporating small quantities (0-20% on a molar basis) of zwitterions as sulfobetaine methacrylate (SBMA) or carboxybetaine methacrylate (CBMA) into lauryl methacrylate-based coatings whose relatively hydrophobic nature encourages adhesion of the diatom Navicula incerta, a common microfouling organism responsible for the formation of 'slime'. This approach allows potential enhancements in antifouling afforded by zwitterion incorporation to be easily quantified.

Probing the Surfaces of Biomacromolecules with Polymer-Scaffolded Dynamic Combinatorial Libraries.

Methods to analyze and compare biomacromolecular surfaces are still in their relative infancy on account of the challenges involved in comparing surfaces computationally. We describe a systems chemistry approach that utilizes polymer-scaffolded dynamic combinatorial libraries to experimentally probe biomacromolecular surfaces in aqueous solution which provides feedback as to the nature of the surfaces, allowing the comparison of three globular proteins and a nucleic acid.

Molecular Recognition-Mediated Transformation of Single-Chain Polymer Nanoparticles into Crosslinked Polymer Films.

We describe single-chain polymer nanoparticles (SCNPs) possessing intramolecular dynamic covalent crosslinks that can transform into polymer films through a molecular recognition-mediated crosslinking process. The SCNPs utilise molecular recognition with surface-immobilised proteins to concentrate upon a substrate, bringing the SCNPs into close spatial proximity with one another and allowing their dynamic covalent crosslinkers to undergo intra- to interpolymer chain crosslinking leading to the formation of polymeric film. SCNPs must possess both the capacity for specific molecular recognition and a dynamic nature to their intramolecular crosslinkers to form polymer films, and an investigation of the initial phase of film formation indicates it proceeds from features which form upon the surface then grow predominantly in the xy directions.

Thermal stability and rheological properties of the 'non-stick' Caf1 biomaterial.

The ability to culture cells in three-dimensions has many applications, from drug discovery to wound healing. 3D cell culture methods often require appropriate scaffolds that mimic the cellular environments of different tissue types. The choice of material from which these scaffolds are made is of paramount importance, as its properties will define the manner in which cells interact with the scaffold.

Nanoscale silicon substrate patterns from self-assembly of cylinder forming poly(styrene)-block-poly(dimethylsiloxane) block copolymer on silane functionalized surfaces.

Poly(styrene)-block-poly(dimethylsiloxane) (PS-b-PDMS) is an excellent block copolymer (BCP) system for self-assembly and inorganic template fabrication because of its high Flory-Huggins parameter (χ ∼ 0.26) at room temperature in comparison to other BCPs, and high selective etch contrast between PS and PDMS block for nanopatterning. In this work, self-assembly in PS-b-PDMS BCP is achieved by combining hydroxyl-terminated poly(dimethylsiloxane) (PDMS-OH) brush surfaces with solvent vapor annealing.

Orthogonal breaking and forming of dynamic covalent imine and disulfide bonds in aqueous solution.

Orthogonal bond-breaking and forming of dynamic covalent disulfide and imine bonds in aqueous solution is demonstrated. Through judicious choice of reaction partners and conditions, it is possible to cleave and reform selectively these bonds in the presence of each other in the absence of unwanted competing processes.

Templating carbohydrate-functionalised polymer-scaffolded dynamic combinatorial libraries with lectins.

A conceptually new approach to the design of macromolecular receptors for lectins is outlined. Carbohydrate-functionalised Polymer-Scaffolded Dynamic Combinatorial Libraries (PS-DCLs) have been prepared in aqueous solution by the reversible conjugation of carbohydrates possessing acylhydrazide functionalities in their aglycone on to an aldehyde-functionalised polymer scaffold. PS-DCLs have been shown to undergo compositional change in response to the addition of lectin templates, with polymer scaffolds preferentially incorporating carbohydrate units which recognise the lectin added.

Enhanced Raman and luminescence spectra from co-encapsulated silicon quantum dots and Au-Ag nanoalloys.

We report an approach to enhance simultaneously luminescence and SERS signals with a single excitation wavelength by co-encapsulating silicon quantum dots and Au-Ag alloy nanoparticles encoded with Raman reporter molecules inside polymeric nanoparticles. The SERS-luminescence enhancement exploits the large Stokes shift of silicon quantum dots, which allows 'room' for the display of a Raman spectrum.

Mimicking nature with synthetic macromolecules capable of recognition.

Nature has, through billions of years of evolution, assembled a multitude of polymeric macromolecules capable of exquisite molecular recognition. This functionality arises from the precise control exerted over their biosynthesis that results in key residues being anchored in the appropriate positions to interact with target substrates. Developing 'wholly synthetic' macromolecular analogues that can mimic this behaviour presents a considerable challenge to chemists, who lack the 'biological machinery' used in nature to assemble polymers with such precision.

pH-responsive single-chain polymer nanoparticles utilising dynamic covalent enamine bonds.

Structurally dynamic single-chain polymer nanoparticles that can reversibly undergo a coil to particle transition via formation and cleavage of intramolecular dynamic enamine cross-links are reported.

Determination of key structure-activity relationships in siRNA delivery with a mixed micelle system.

Short interfering ribonucleic acids (siRNAs) offer a highly specific and selective form of therapy for diseases with a genetic component; however the poor pharmacokinetic properties of the molecule have impeded its development into a therapeutic for use in vivo. Several different approaches have been taken to develop a successful siRNA delivery system but these systems lack the flexibility for easy optimisation. Here, we propose a polymeric nanoparticle (PNP) system consisting of two amphiphilic diblock copolymers which allow for the rapid determination of structure-activity relationships involving gene knockdown and toxicity.