Optimization of softwood pretreatment by microwave-assisted deep eutectic solvents at high solids loading.

Microwave-assisted deep eutectic solvent (DES) has received attention as an ultrafast pretreatment method in lignocellulose fractionation. This study investigated the improvement of milled softwood mixture (MSM) fractionation with chlorine chloride-formic acid (ChCl:FA) to obtain residues with high glucan retention and purity while removing majority of the lignin and hemicelluloses. At the optimum pretreatment conditions i.

Separation of cellulose from industrial paper mill wastewater dried sludge using a commercial and cheap ionic liquid.

Industrial wastewaters and their treatment are now placed at the heart of the environmental concerns that industries face. Some research work has been carried out in order to limit the impact of these wastes on the environment as well as their costs. In this study, wastewater dehydrated sludge (55% wt.

Effect of temperature and pressure on characteristics and reactivity of biomass-derived chars.

This study evaluates the influence of pyrolysis temperature (350-450°C) and pressure (0.1-2.0MPa) on product yields and char properties.

Preparation, characterization and gas permeation investigation of resorcinol-formaldehyde polymer or carbon xerogels/tubular ceramic composites.

New very stable composites prepared by deposition of resorcinol-formaldehyde polymer (RF-) or carbon (C-) xerogels into walls of commercial porous tubular ceramics (TiO2-ZrO2 and alphaAl2O3-gammaAl203) were obtained by a sol-gel process followed by a drying and a pyrolytic (only for C-xerogel/ceramic composites) step. They were characterized by nitrogen adsorption-desorption, SEM and XRD, and tested for gas (H2, CH4, CO2 and CO) separation applications. Additional morpho-structural information about the open-interconnected ultramicropore structure of composites was found by gas permeation investigation.

Exploring iron-based multifunctional catalysts for Fischer-Tropsch synthesis: a review.

The continuous increase in oil prices together with an increase in carbon dioxide concentration in the atmosphere has prompted an increased interest in the production of liquid fuels from non-petroleum sources to ensure the continuation of our worldwide demands while maximizing CO(2) utilization. In this sense, the Fischer-Tropsch (FT) technology provides a feasible option to render high value-added hydrocarbons. Alternative sources, such as biomass or coal, offer a real possibility to realize these purposes by making use of H(2)-deficient or CO(2)-rich syngas feeds.