Fabricating high-purity graphite disk electrodes as a cost-effective alternative in fundamental electrochemistry research.

Graphite electrodes offer remarkable electrochemical properties, emerging as a viable alternative to glassy carbon (GCE) and other carbon-based electrodes for fundamental electrochemistry research. We report the fabrication and characterization of high-purity graphite disk electrodes (GDEs), made from cost-effective materials and a solvent-free methodology employing readily available laboratory equipment. Analysis of their physical properties via SEM, EDX and XPS reveals no metallic interferences and a notably high porosity, emphasizing their potential.

Towards time resolved characterization of electrochemical reactions: electrochemically-induced Raman spectroscopy.

Structural characterization of transient electrochemical species in the sub-millisecond time scale is the all-time wish of any electrochemist. Presently, common time resolution of structural spectro-electrochemical methods is about 0.1 seconds.

Copper Carbonate Hydroxide as Precursor of Interfacial CO in CO Electroreduction.

Copper electrodes are especially effective in catalysis of C and further multi-carbon products in the CO reduction reaction (CO RR) and therefore of major technological interest. The reasons for the unparalleled Cu performance in CO RR are insufficiently understood. Here, the electrode-electrolyte interface was highlighted as a dynamic physical-chemical system and determinant of catalytic events.

Coherent Acoustic Interferometry during the Photodriven Oxygen Evolution Reaction Associates Strain Fields with the Reactive Oxygen Intermediate (Ti-OH*).

The oxygen evolution reaction (OER) from water requires the formation of metastable, reactive oxygen intermediates to enable oxygen-oxygen bond formation. Conversely, such reactive intermediates could also structurally modify the catalyst. A descriptor for the overall catalytic activity, the first electron and proton transfer OER intermediate from water, (M-OH*), has been associated with significant distortions of the metal-oxygen bonds upon charge-trapping.

Operando Raman spectroscopy tracks oxidation-state changes in an amorphous Co oxide material for electrocatalysis of the oxygen evolution reaction.

Transition metal oxides are of high interest in both energy storage (batteries) and production of non-fossil fuels by (photo)electrocatalysis. Their functionally crucial charge (oxidation state) changes and electrocatalytic properties are best investigated under electrochemical operation conditions. We established operando Raman spectroscopy for investigation of the atomic structure and oxidation state of a non-crystalline, hydrated, and phosphate-containing Co oxide material (CoCat), which is an electrocatalyst for the oxygen evolution reaction (OER) at neutral pH and is structurally similar to LiCoO of batteries.

Soft x-ray spectroscopies in liquids and at solid-liquid interface at BACH beamline at Elettra.

The beamline for advanced dichroism of the Istituto Officina dei Materiali-Consiglio Nazionale delle Ricerche, operating at the Elettra synchrotron in Trieste (Italy), works in the extreme ultraviolet-soft x-ray photon energy range with selectable light polarization, high energy resolution, brilliance, and time resolution. The beamline offers a multi-technique approach for the investigation of the electronic, chemical, structural, magnetic, and dynamical properties of materials. Recently, one of the three end stations has been dedicated to experiments based on electron transfer processes at the solid/liquid interfaces and during photocatalytic or electrochemical reactions.

Understanding the Role of Surface States on Mesoporous NiO Films.

Surface states of mesoporous NiO semiconductor films have particular properties differing from the bulk and are able to dramatically influence the interfacial electron transfer and adsorption of chemical species. To achieve a better performance of NiO-based p-type dye-sensitized solar cells (p-DSCs), the function of the surface states has to be understood. In this paper, we applied a modified atomic layer deposition procedure that is able to passivate 72% of the surface states on NiO by depositing a monolayer of AlO.

Photoinduced hole transfer from tris(bipyridine)ruthenium dye to a high-valent iron-based water oxidation catalyst.

An efficient water oxidation system is a prerequisite for developing solar energy conversion devices. Using advanced time-resolved spectroscopy, we study the initial catalytic relevant electron transfer events in the light-driven water oxidation system utilizing [Ru(bpy)3]2+ (bpy = 2,2'-bipyridine) as a light harvester, persulfate as a sacrificial electron acceptor, and a high-valent iron clathrochelate complex as a catalyst. Upon irradiation by visible light, the excited state of the ruthenium dye is quenched by persulfate to afford a [Ru(bpy)3]3+/SO4˙- pair, showing a cage escape yield up to 75%.

Efficient visible light-driven water oxidation catalysed by an iron(iv) clathrochelate complex.

A water-stable FeIV clathrochelate complex catalyses fast and homogeneous photochemical oxidation of water to dioxygen with a turnover frequency of 2.27 s-1 and a maximum turnover number of 365. An FeV intermediate generated under catalytic conditions is trapped and characterised using EPR and Mössbauer spectroscopy.

Light-Induced Interfacial Dynamics Dramatically Improve the Photocurrent in Dye-Sensitized Solar Cells: An Electrolyte Effect.

A significant increase in the photocurrent generation during light soaking for solar cells sensitized by the triphenylamine-based D-π-A organic dyes (PD2 and LEG1) and mediated by cobalt bipyridine redox complexes has been observed and investigated. The crucial role of the electrolyte has been identified in the performance improvement. Control experiments based on a pre-treatment strategy reveals TBP as the origin.

Unveiling hole trapping and surface dynamics of NiO nanoparticles.

The research effort in mesoporous p-type semiconductors is increasing due to their potential application in photoelectrochemical energy conversion devices. In this paper an electron-hole pair is created by band-gap excitation of NiO nanoparticles and the dynamics of the electron and the hole is followed until their recombination. By spectroscopic characterization it was found that surface Ni states work as traps for both electrons and holes.

Chemical and Physical Reduction of High Valence Ni States in Mesoporous NiO Film for Solar Cell Application.

The most common material for dye-sensitized photocathodes is mesoporous NiO. We transformed the usual brownish NiO to be more transparent by reducing high valence Ni impurities. Two pretreatment methods have been used: chemical reduction by NaBH and thermal reduction by heating.

Supramolecular Hemicage Cobalt Mediators for Dye-Sensitized Solar Cells.

A new class of dye-sensitized solar cells (DSSCs) using the hemicage cobalt-based mediator [Co(ttb)] with the highly preorganized hexadentate ligand 5,5'',5''''-((2,4,6-triethyl benzene-1,3,5-triyl)tris(ethane-2,1-diyl))tri-2,2'-bipyridine (ttb) has been fully investigated. The performances of DSSCs sensitized with organic D-π-A dyes utilizing either [Co(ttb)] or the conventional [Co(bpy) ] (bpy=2,2'-bipyridine) redox mediator are comparable under 1000 W m AM 1.5 G illumination.

A comprehensive comparison of dye-sensitized NiO photocathodes for solar energy conversion.

We investigated a range of different mesoporous NiO electrodes prepared by different research groups and private firms in Europe to determine the parameters which influence good quality photoelectrochemical devices. This benchmarking study aims to solve some of the discrepancies in the literature regarding the performance of p-DSCs due to differences in the quality of the device fabrication. The information obtained will lay the foundation for future photocatalytic systems based on sensitized NiO so that new dyes and catalysts can be tested with a standardized material.

Kinetic Evidence of Two Pathways for Charge Recombination in NiO-Based Dye-Sensitized Solar Cells.

Mesoporous nickel oxide has been used as electrode material for p-type dye-sensitized solar cells (DSCs) for many years but no high efficiency cells have yet been obtained. One of the main issues that lowers the efficiency is the poor fill factor, for which a clear reason is still missing. In this paper we present the first evidence for a relation between applied potential and the charge recombination rate of the NiO electrode.

Ru-based donor-acceptor photosensitizer that retards charge recombination in a p-type dye-sensitized solar cell.

We report on the synthesis and characterization of a donor-acceptor ruthenium polypyridyl complex as a photosensitizer for p-type dye-sensitized solar cells (DSSCs). The electrochemical, photophysical, and photovoltaic performance of two ruthenium-based photosensitizers were tested in NiO-based DSSCs; bis-(2,2'-bipyridine-4,4'-dicarboxylic acid)(2)N-(1,10-phenanthroline)-4-nitronaphthalene-1,8-dicarboximide ruthenium(II), ([Ru(dcb)(2)(NMI-phen)](PF(6))(2)) and tris-(2,2'-bipyridine-4,4'-dicarboxylic acid)(3) ruthenium(ii), [(Ru(dcb)(3))Cl(2)]. The presence of an electron-accepting group, 4-nitronaphthalene-1,8-dicarboximide (NMI), attached to the phenanthroline of [Ru(dcb)(2)(NMI-phen)](2+) resulted in long-lived charge separation between reduced [Ru(dcb)(2)(NMI-phen)](2+) and NiO valence band holes; 10-50 μs.