The influence of surface energy of titanium-zirconium alloy on osteoblast cell functions in vitro.

The success of an implant used for bone regeneration and repair is determined by the events that take place at the cell-material interface. An understanding of these interactions in vitro gives insights into the formulation of ideal conditions for their effective functioning in vivo. Thus, it is not only important to understand the physico-chemical properties of the materials but, also necessary to assess the cellular responses to them to determine their long-term stability and efficacy as implants.

In vitro osteoblast-like cell proliferation on nano-hydroxyapatite coatings with different morphologies on a titanium-niobium shape memory alloy.

The morphology of nanomaterials significantly affects their physical, chemical, and biological properties. In the present study, nano-hydroxyapatite coatings with different morphologies were produced on the surface of a titanium-niobium shape memory alloy via a hydrothermal process. The effect of the nano-hydroxyapatite coatings on the in vitro proliferation of SaOS-2 osteoblast-like cells was investigated.

Nanohydroxyapatite coating on a titanium-niobium alloy by a hydrothermal process.

A novel one-step hydrothermal coating process was used to produce nanohydroxyapatite (nano-HA) coating on a titanium-niobium (TiNb) alloy substrate in a newly designed solution containing calcium and phosphate ions. The morphology of the coating was studied using scanning electron microscopy. The phase identification of the coating was carried out using X-ray diffraction, attenuated total reflectance Fourier transform infrared spectroscopy and transmission electron microscopy.

Biomimetic modification of porous TiNbZr alloy scaffold for bone tissue engineering.

Porous titanium (Ti) and Ti alloys are important scaffold materials for bone tissue engineering. In the present study, a new type of porous Ti alloy scaffold with biocompatible alloying elements, that is, niobium (Nb) and zirconium (Zr), was prepared by a space-holder sintering method. This porous TiNbZr scaffold with a porosity of 69% exhibits a mechanical strength of 67 MPa and an elastic modulus of 3.

Porous TiNbZr alloy scaffolds for biomedical applications.

In the present study, porous Ti-10Nb-10Zr alloy scaffolds with different porosities were successfully fabricated by a "space-holder" sintering method. By the addition of biocompatible alloying elements the porous TiNbZr scaffolds achieved significantly higher strength than unalloyed Ti scaffolds of the same porosity. In particular, the porous TiNbZr alloy with 59% porosity exhibited an elastic modulus and plateau stress of 5.

Ti6Ta4Sn alloy and subsequent scaffolding for bone tissue engineering.

Porous titanium (Ti) and titanium alloys are promising scaffold biomaterials for bone tissue engineering, because they have the potential to provide new bone tissue ingrowth abilities and low elastic modulus to match that of natural bone. In the present study, a new highly porous Ti6Ta4Sn alloy scaffold with the addition of biocompatible alloying elements (tantalum (Ta) and tin (Sn)) was prepared using a space-holder sintering method. The strength of the Ti6Ta4Sn scaffold with a porosity of 75% was found to be significantly higher than that of a pure Ti scaffold with the same porosity.

Influence of calcium ion deposition on apatite-inducing ability of porous titanium for biomedical applications.

In the present study, the influence of calcium ion deposition on the apatite-inducing ability of porous titanium (Ti) was investigated in a modified simulated body fluid (m-SBF). Calcium hydroxide (Ca(OH)(2)) solutions with five degrees of saturation were used to hydrothermally deposit Ca ions on porous Ti with a porosity of 80%. Apatite-inducing ability of the Ca-ion-deposited porous Ti was evaluated by soaking them in m-SBF for up to 14 days.

Bone formation following implantation of titanium sponge rods into humeral osteotomies in dogs: a histological and histometrical study.

Background: Titanium (Ti) is widely proven to enhance bone contact and growth on its surface. It is expected that bone defects could benefit from Ti to promote healing and to increase strength of the implanted area.

Purpose: The present study aimed at comparing the potential of porous Ti sponge rods with synthetic hydroxyapatite (HA) for the healing of bone defects in a canine model.

Mechanical properties and bioactive surface modification via alkali-heat treatment of a porous Ti-18Nb-4Sn alloy for biomedical applications.

A porous Ti-18 at.%Nb-4 at.%Sn (hereafter, Ti-18Nb-4Sn) alloy was prepared by powder metallurgy.

Effect of heat-treatment atmosphere on the bond strength of apatite layer on Ti substrate.

Objectives: The purpose of this study was to investigate the bond strength of apatite layer on titanium (Ti) substrate coated by biomimetic method and to improve the bonding of apatite layer to Ti substrate by optimizing the alkali heat-treatment process.

Methods: Ti plates pre-treated with an alkali solution of 10 M sodium hydroxide (NaOH) were heat-treated at 600 degrees C for 1h at different atmospheres: in air and in vacuum. A dense apatite layer formed on top of the sodium titanate layer after soaking the alkali and heat-treated Ti samples in simulated body fluid (SBF) for up to 3 weeks.

Effect of surface roughness of Ti, Zr, and TiZr on apatite precipitation from simulated body fluid.

Some of the critical properties for a successful orthopedic or dental implant material are its biocompatibility and bioactivity. Pure titanium (Ti) and zirconium (Zr) are widely accepted as biocompatible metals, due to their non-toxicity. While the bioactivity of Ti and some Ti alloys has been extensively investigated, there is still insufficient data for Zr and titanium-zirconium (TiZr) alloys.