Neonatal nociceptive stimulation results in pain sensitization, reduction of hippocampal 5-HT receptor, and p-CREB expression in adult female rats.

Painful invasive procedures are often performed on newborns admitted to intensive care units (ICU). The acute and long-term effects caused by these stimuli can be investigated in animal models, such as newborn rats. Previous studies have shown that animals subjected to nociceptive stimuli in the neonatal period show sex-specific behavioral changes such as signs of anxiety or depression.

Influence of Specimen Dimension, Water Immersion Protocol, and Surface Roughness on Water Sorption and Solubility of Resin-Based Restorative Materials.

The evaluation of water sorption and solubility is pivotal for the development of new resin-based restorative materials with the potential for clinical application. The purpose of the present study was to evaluate the influence of the specimen dimension, water immersion protocol, and surface roughness on the water sorption and solubility of three resin-based restorative materials. Disk-shaped specimens of 15 mm × 1 mm, 10 mm × 1 mm, and 6 mm × 1 mm were produced with a composite resin (Z100), a resin cement (RelyX ARC), and an adhesive system (Single Bond 2-SB2).

Evolution of roughness and optical properties of resin composites submitted to whitening toothpastes-cigarette smoking cycling.

Purpose: To evaluate the effect of cycling whitening toothpaste with cigarette smoking (WTCS) on the evolution of roughness, color, translucency, and gloss of microfilled, microhybrid, and nanofilled resin composites.

Methods: 15 specimens of Durafill - DVS, Empress Direct - ED, and Z350 - FZ were divided into three groups according to the toothpastes:: conventional, control group, (Colgate - C) and Whitening (Colgate Luminous White - CW and Oral B 3D White - OW) and roughness, color, translucency, and gloss were evaluated before and after the specimens were submitted to WTCS for 8 weeks. Data were analyzed by two-way ANOVA, 3-way repeated measures ANOVA, and Tukey HSD post hoc test (α= 0.

Characterization and Anti-Caries Effect of an Experimental Adhesive Containing Natural Antimicrobial Agents.

Purpose: To characterize experimental adhesives containing natural antimicrobial agents (proanthocyanidins, apigenin, tt-farnesol) in the primer and to evaluate their anti-caries effect.

Materials And Methods: Natural agents were incorporated in the primer of an experimental adhesive: 4.5% proanthocyanidins (PA), 1 mM apigenin (API), 1 mM apigenin + 5 mM tt-farnesol (API + FAR), and primer without antimicrobial agent (control).

Resin-dentin bond stability of etch-and-rinse adhesive systems with different concentrations of MMP inhibitor GM1489.

Enzymatic degradation of the hybrid layer can be accelerated by the activation of dentin metalloproteinases (MMP) during the bonding procedure. MMP inhibitors may be used to contain this process. Objective To evaluate the degree of conversion (DC%), dentin bond strength (µTBS) (immediate and after 1 year of storage in water), and nanoleakage of an experimental (EXP) and a commercial (SB) adhesive system, containing different concentrations of the MMP inhibitor GM1489: 0, 1 µM, 5 µM and 10 µM.

Characterization and Antibacterial Effect of an Experimental Adhesive Containing Different Concentrations of Proanthocyanidin.

Purpose: To evaluate the degree of conversion (DC%), water sorption (Sp), solubility (Sl), dentin bond strength (μTBS) (immediate and after 12 months of storage), and the antibacterial effect of an experimental adhesive containing different concentrations (%) of proanthocyanidin (PA): 0, 1%, 2%, 4.5%, and 6% (PA0, PA1%, PA2%, PA4.5% and PA6%, respectively).

Bond stability of conventional adhesive system with MMP inhibitors to superficial and deep dentin.

Purpose: To evaluate the microshear bond strength (μSBS) to deep (DD) or superficial (SD) dentin (μSBS) overtime, nanoleakage (AG%), degree of conversion (DC%), water sorption (WSp), and solubility (WSl) of an adhesive system [Adper Single Bond 2(ASB)] containing matrix metalloproteinases (MMP) inhibitors [GM1489 (ASB-GM), Batimastat (ASB-BAT), or Chlorhexidine diacetate (ASB-CHX)]. ASB without inhibitor was used as control (CONTROL).

Materials And Methods: WSp and WSL were calculated based on ISO4049.

Proteomic analysis of Paracoccidioides brasiliensis complex isolates: Correlation of the levels of differentially expressed proteins with in vivo virulence.

Background: Paracoccidioidomycosis (PCM) is a systemic mycosis commonly found in Latin America that is caused by distinct species of Paracoccidioides genus: Paracoccidioides brasiliensis complex (S1, PS2, PS3 and PS4) and Paracoccidioides lutzii. Its pathobiology has been recently explored by different approaches to clarify the mechanisms of host-pathogen interactions underpinning PCM. The diversity of clinical forms of this disease has been attributed to both host- and fungus-related factors.

Effect of Calcium Hydroxide on Bonding Performance of an Experimental Self-etch Adhesive.

Purpose: To investigate the effect of Ca(OH)2 concentration on pH neutralization, degree of conversion (DC%), and bonding performance of experimental self-etch adhesives (SEAs).

Materials And Methods: Four different concentrations of Ca(OH)2 (0 wt%, 1 wt%, 2 wt%, and 4 wt%) were added to the bond of an experimental two-step SEA consisting of primer (10-MDP [30 wt%], TEG-DMA [30 wt%], ethanol [35 wt%], water [5 wt%], camphorquinone [0.5 wt%], and tertiary amine [0.

Resin-dentin Bond Stability of Experimental 4-META-based Etch-and-rinse Adhesives Solvated by Ethanol or Acetone.

Purpose: To investigate the influence of 4-META concentration and type of solvent on the degree of conversion (DC%) and resin-dentin bond stability of experimental etch-and-rinse adhesives.

Materials And Methods: Four different concentrations of 4-META (12 wt%, 20 wt%, 30 wt%, 40 wt%) were added to a model adhesive system consisting of TEG-DMA (25 wt%), UDMA (20 wt%), HEMA (30 wt%), water (4 wt%), camphorquinone (0.5 wt%), and tertiary amine (0.

Characterization of an experimental resin composite organic matrix based on a tri-functional methacrylate monomer.

This study evaluated the potential of a tri-functional monomer (trimethylolpropane trimethacrylate -TMPTMA) for inclusion in a dental composite organic matrix. Initially, four ternary matrixes with different concentrations (wt%) of bi-functional monomers [BisGMA (G), Bis-EMA (E) and TEGDMA (T)] were analyzed: GET523, GET532, EGT523 and EGT532 (the numbers (n) represent n×10 wt% of each monomer). The following properties were evaluated: degree of conversion, flexural strength, elastic modulus, hardness, absorption, solubility, diffusion coefficient of water and crosslink density.

Influence of organic acids present in oral biofilm on the durability of the repair bond strength, sorption and solubility of resin composites.

Purpose: To evaluate the repair bond strength after storage in water, lactic and propionic acid after 7 days and 6 months and the sorption and solubility of resin composites used.

Methods: Five cylinders of each resin composite (microhybrid, nanofilled and silorane-based composite) were prepared. Specimens were aged with thermocycling (5 and 55°C) 5,000 times.

Influence of Organic Acids from the Oral Biofilm on the Bond Strength of Self-Etch Adhesives to Dentin.

The aim of this study was to evaluate the microtensile bond strength of self-etch adhesive systems to dentin after storage in acids from oral biofilm. Three adhesive systems were used in the study: a two-step self-etch adhesive for use with a silorane-based resin composite (Filtek P90 adhesive system - P90), a two-step self-etch adhesive (Clearfil SE Bond - CSE) and a one-step self-etch adhesive (Adper Easy One - AEO). The bond strength of these products was evaluated by bonding resin composite (Filtek Z350 for CSE and AEO; and Filtek P90 for P90) to 90 bovine dentin tooth fragments, according to the manufacturer's instructions.

Experimental etch-and-rinse adhesive systems containing MMP-inhibitors: Physicochemical characterization and resin-dentin bonding stability.

Objectives: To evaluate the degree of conversion (DC%), water sorption (WS), solubility (SO) and the resin-dentin bonding stability (μTBS) of experimental (EXP) etch-and-rinse adhesive systems containing MMP-inhibitors: Galardin-GAL, Batimastat-BAT, GM1489-GM1 and chlorhexidine diacetate-CHX.

Methods: DC% was measured using FT-IR spectroscopy, while WS and SO were calculated based on ISO4049. Thirty-six human molars were wet ground until the occlusal dentin was exposed.

Early postnatal nociceptive stimulation results in deficits of spatial memory in male rats.

Prematurely-born infants are exposed to multiple invasive procedures while in the intensive care unit. Newborn rats and humans have similar behavioral responses to noxious stimulation. Previous studies have shown that early noxious stimuli may alter dentate gyrus neurogenesis and the behavioral repertoire of adult rats.

Degradation of resin composites in a simulated deep cavity.

The aim of this study was to analyze the sorption and solubility of a nanofilled (Filtek Z350) and a midifilled (Filtek P60) resin composite in oral environment-like substances, in a simulated deep cavity. A cylindrical cavity prepared in a bovine incisor root was incrementally filled with resin composites. The obtained resin composite cylinders were cut perpendicularly to the axis to obtain 1-mm-thick discs that were divided into fifteen groups (n=5) according to depth (1, 2, 3, 4 and 5 mm) and immersion media (distilled water - DW, artificial saliva - AS and lactic acid - LA).

Sodium fluoride and casein phosphopeptide-amorphous calcium phosphate cream plus sodium fluoride efficacy in preventing enamel erosion in a simulated oral environment study model.

Aim: The aim of this study was to evaluate the effectiveness of dentifrices containing high concentrations of sodium fluoride (NaF) and casein phosphopeptide-amorphous calcium phosphate cream plus fluoride (CPP-ACPF) in prevention of the erosion in a simulated oral environment study model.

Subjects And Methods: Fifteen flat human enamel specimens were polished and half of the surfaces were protected with adhesive tape. Initial Knoop microhardness (KHN) and surface roughness (SR) were measured, and specimens were assigned to four groups: Control (placebo toothpaste - G1); CPP-ACPF (G2), NaF 1450 ppm (G3), and NaF 5000 ppm (G4).

Sorption and solubility of self-etching adhesives immersed in organic acids present in oral biofilm.

Purpose: This study evaluated the sorption and solubility of self-etching adhesive systems after immersion in distilled water, lactic acid, and propionic acid.

Materials And Methods: Specimens of 2 two-step (P90 System Adhesive [P90], Clearfil SE Bond [CSE]) and 1 single-step (Adper Easy One [AEO]) adhesive systems were prepared and divided into 4 groups: P90 primer ( P90-P), P90 bond (P90-B), AEO, and CSE bond (CSE-B). Specimens were placed in a desiccator and weighed daily until achieving a constant mass (m1).

Long-term degradation of resin-based cements in substances present in the oral environment: influence of activation mode.

Unlabelled: Indirect restorations in contact with free gingival margins or principally within the gingival sulcus, where the presence of organic acids produced by oral biofilm is higher, may present faster degradation of the resin-based cement pellicle.

Objectives: To investigate the degradation of four resin-based cements: Rely X ARC (R), Variolink II (V), Enforce (E) and All Cem (A), after immersion in distilled water (DW), lactic acid (LA) and artificial saliva (AS) and to analyze the influence of the activation mode on this response.

Material And Methods: Two activation modes were evaluated: chemical (Ch) and dual (D).

Microhardness evaluation of in situ vital bleaching and thickening agents on human dental enamel.

Bleaching systems and thickening agents lead to changes in the tooth enamel matrix as a result of an unspecific oxidation of the bleaching gel in the enamel. This reaction may result in a loss of mineral content and a decrease in microhardness. The aim of this study was to evaluate the effects of different bleaching systems and their thickening agents on the microhardness of human enamel in situ.

Characteristics of environmental Paracoccidioides brasiliensis isolates.

The ecological niche or exact habitat of the fungus Paracoccidioides brasiliensis is not known, and few isolates have been obtained from the environment. In this study, ten isolates were analyzed with respect to antigenic composition, serology, pathogenicity, and molecular aspects. Gp43 is considered to be the molecular basis for the serodiagnosis of paracoccidioidomycosis; however, in this study only six of the environmental isolates secreted this molecule (four in great amounts and two in small amounts).