Lipidic Matrixes Containing Clove Essential Oil: Biological Activity, Microstructural and Textural Studies.

Clove essential oil (CEO) is known for having excellent antioxidant and antimicrobial properties, but the poor stability of its components to light and temperature compromise this activity. The aim of this study is to evaluate the textural, antioxidant, antimicrobial and microstructural properties of matrixes produced with representative natural waxes and CEO. Thus, waxy emulsifiers, such as beeswax, candelilla wax, carnauba wax, and ozokerite wax, were employed to create such matrixes.

Antimicrobial Contribution of Chitosan Surface-Modified Nanoliposomes Combined with Colistin against Sensitive and Colistin-Resistant Clinical .

Colistin is a re-emergent antibiotic peptide used as a last resort in clinical practice to overcome multi-drug resistant (MDR) Gram-negative bacterial infections. Unfortunately, the dissemination of colistin-resistant strains has increased in recent years and is considered a public health problem worldwide. Strategies to reduce resistance to antibiotics such as nanotechnology have been applied successfully.

Development of Antioxidant-Loaded Nanoliposomes Employing Lecithins with Different Purity Grades.

This work focused on comparing the ability of lecithins with two purity grades regarding their performance in the development of nanoliposomes, as well as their ability to contain and release polar (trans-aconitic acid) and non-polar (quercetin) antioxidant compounds. First, the chemical characterization of both lecithins was carried out through infrared spectroscopy (FTIR), electrospray ionization mass spectrometry (ESI/MS), and modulated differential scanning calorimetry (mDSC). Second, nanoliposomes were prepared by the ethanol injection method and characterized by means of particle size, polydispersity, and zeta potential measurements.

Development of Polyelectrolyte Complex Nanoparticles-PECNs Loaded with Ampicillin by Means of Polyelectrolyte Complexation and Ultra-High Pressure Homogenization (UHPH).

This study was focused on synthesizing, characterizing and evaluating the biological potential of Polyelectrolyte Complex Nanoparticles (PECNs) loaded with the antibiotic ampicillin. For this, the PECNs were produced initially by polyelectrolytic complexation (bottom-up method) and subsequently subjected to ultra-high pressure homogenization-UHPH (top-down method). The synthetic polymeric materials corresponding to the sodium salt of poly(maleic acid--octadecene) (PAM-18Na) and the chloride salt of Eudragit E-100 (EuCl) were used, where the order of polyelectrolyte complexation, the polyelectrolyte ratio and the UHPH conditions on the PECNs features were evaluated.

Relationship between the Ionization Degree and the Inter-Polymeric Aggregation of the Poly(maleic acid--octadecene) Salts Regarding Time.

Alternating amphiphilic copolymers are macromolecular systems with a polarity duality in their structure, since they are generally formed by alternating segments corresponding to a potential electrolyte group and an alkyl (aliphatic or aromatic) group. These systems, depending on the ionization degree, as well as the time, may form different types of intra and interpolymeric aggregates in aqueous media. Therefore, this study, which in fact is the continuation of a previously reported work, is focused on establishing how the ionization degree of the sodium and potassium salts of the poly(maleic acid--octadecene) affect zeta potential, pH, electrical conductivity, particle size, polydispersity index, and surface tension over time.

Study of In Vitro and In Vivo Carbamazepine Release from Coarse and Nanometric Pharmaceutical Emulsions Obtained via Ultra-High-Pressure Homogenization.

In the past decade, pharmaceutical nanotechnology has proven to be a promising alternative for improving the physicochemical and biopharmaceutical features for conventional pharmaceutical drug formulations. The goal of this study was to develop, characterize, and evaluate the in vitro and in vivo release of the model drug carbamazepine (CBZ) from two emulsified formulations with different droplet sizes (coarse and nanometric). Briefly, oil-in-water emulsions were developed using (i) Sacha inchi oil, ultrapure water, Tween 80, and Span 80 as surfactants, (ii) methyl-paraben and propyl-paraben as preservatives, and (iii) CBZ as a nonpolar model drug.

Relationship between Degree of Polymeric Ionisation and Hydrolytic Degradation of Eudragit E Polymers under Extreme Acid Conditions.

The commercial copolymers Eudragit E 100 and Eudragit PO are widely used materials in the pharmaceutical field as coating systems. Such materials derived from amino-methacrylate groups under acidulated conditions may acquire an ionisable fraction or undergo hydrolytic degradation of the polymeric structure. This work focused on establishing the chemical, physical, and surface changes of two reprocessed polymeric materials, here named as EuCl-E-100 and EuCl-E-PO, which were obtained from the commercial Eudragit E 100 and Eudragit E PO, respectively.

Effect of the Surface Hydrophobicity Degree on the Release of Polar and Non-Polar Drugs from Polyelectrolyte Matrix Tablets.

This work is the continuation of a series of studies focused on establishing the relationship between the surface thermodynamic properties of polyelectrolyte matrix tablets and drug release mechanisms. In this case, two model drugs with different polarity features, such as carbamazepine (non-polar) and metoprolol succinate (polar) were used in combination with polymeric material hydroxypropyl-methyl cellulose (HPMC) and two polyelectrolytes derived from maleic anhydride corresponding to the sodium salts of poly(maleic acid--ethylene) and poly(maleic acid--octadecene) named PAM-0Na and PAM-18Na, respectively. The polymers were obtained and characterized as reported previously.

Evaluation of the Antimicrobial Activity of Cationic Peptides Loaded in Surface-Modified Nanoliposomes against Foodborne Bacteria.

Bacteria are a common group of foodborne pathogens presenting public health issues with a large economic burden for the food industry. Our work focused on a solution to this problem by evaluating antibiotic activity against two bacteria ( and ) of relevance in the field of foodstuffs. We used two approaches: structural modification of the antimicrobial peptides and nano-vehiculisation of the modified peptides into polymer-coated liposomes.

Decrease of Antimicrobial Resistance through Polyelectrolyte-Coated Nanoliposomes Loaded with β-Lactam Drug.

Currently, one of the greatest health challenges worldwide is the resistance to antibiotic drugs, which has led to the pursuit of new alternatives for the recovery of biological activity, where the use of different types of nano-systems has shown an interesting potential. In this study, we evaluated the antibiotic activity of a model drug (ampicillin) encapsulated within coated-nanoliposomes on strains of with different antibiotic-resistance degrees. Hence, liposomes were elaborated by the ethanol injection method and were coated with a cationic polymer (Eudragit E-100) through the layer-by-layer process.

Franz Diffusion Cell Approach for Pre-Formulation Characterisation of Ketoprofen Semi-Solid Dosage Forms.

This study aimed to evaluate and compare, using the methodology of Franz diffusion cells, the ketoprofen (KTP) releasing profiles of two formulations: A gel and a conventional suspension. The second aim was to show that this methodology might be easily applied for the development of semi-solid prototypes and claim proof in pre-formulation stages. Drug release analysis was carried out under physiological conditions (pH: 5.

Natural gum-type biopolymers as potential modified nonpolar drug release systems.

In this work, the relationship between surface properties and drug release mechanism from binary composition tablets formed by quetiapine fumarate and biopolymer materials was studied. The biopolymers correspond to xanthan and tragacanth gums, which are projected as modified drug release systems. The surface studies were carried out by the sessile drop method, while the surface free energy (SFE) was determinate through Young-Dupree and OWRK semi-empirical models.

Application of Nanoparticle Technology to Reduce the Anti-Microbial Resistance through β-Lactam Antibiotic-Polymer Inclusion Nano-Complex.

Biocompatible polymeric materials with potential to form functional structures in association with different therapeutic molecules have a high potential for biological, medical and pharmaceutical applications. Therefore, the capability of the inclusion of nano-Complex formed between the sodium salt of poly(maleic acid--octadecene) and a β-lactam drug (ampicillin trihydrate) to avoid the chemical and enzymatic degradation and enhance the biological activity were evaluated. PAM-18Na was produced and characterized, as reported previously.

Relationship between the Polymeric Ionization Degree and Powder and Surface Properties in Materials Derived from Poly(maleic anhydride-alt-octadecene).

Polymeric materials derived from poly(maleic anhydride--octadecene)-here referred as PAM-18-have shown interesting properties that make them potential pharmaceutical excipients. In this work, eight polymers derived from PAM-18 were obtained using NaOH and KOH at 1:1; 1:0.75, 1:0.

Relationship between Surface Properties and In Vitro Drug Release from Compressed Matrix Containing Polymeric Materials with Different Hydrophobicity Degrees.

This work is the continuation of a study focused on establishing relations between surface thermodynamic properties and in vitro release mechanisms using a model drug (ampicillin trihydrate), besides analyzing the granulometric properties of new polymeric materials and thus establishing the potential to be used in the pharmaceutical field as modified delivery excipients. To do this, we used copolymeric materials derived from maleic anhydride with decreasing polarity corresponding to poly(isobutylene--maleic acid) (hydrophilic), sodium salt of poly(maleic acid--octadecene) (amphiphilic), poly(maleic anhydride--octadecene) (hydrophobic) and the reference polymer hydroxyl-propyl-methyl-cellulose (HPMC). Each material alone and in blends underwent spectroscopic characterization by FTIR, thermal characterization by DSC and granulometric characterization using flow and compaction tests.

Relationship between Surface Properties and In Vitro Drug Release from a Compressed Matrix Containing an Amphiphilic Polymer Material.

The performance of compressed tablet drug delivery systems made using polymeric materials depend on multiple factors, such as surface properties like contact angle, surface free energy and water absorption rate, besides the release mechanisms driven by the kind of polymer used. Hence, it should be possible to establish a relationship between the surface properties and the drug release kinetics. Compressed tablets with different proportions of poly(maleic acid-alt-octadecene) potassium salt (0%, 10%, 20%, 30% and 40%) were prepared.