Evolutionary Systems Biology Identifies Genetic Trade-offs In Rice Defense Against Above- and Belowground Attackers.

Like other plants, wild and domesticated rice species (Oryza nivara, O. rufipogon, and O. sativa) evolve in environments with various biotic and abiotic stresses that fluctuate in intensity through space and time.

Multivariate Bayesian Optimization of CoO Nanoparticles for CO Hydrogenation Catalysis.

The hydrogenation of CO holds promise for transforming the production of renewable fuels and chemicals. However, the challenge lies in developing robust and selective catalysts for this process. Transition metal oxide catalysts, particularly cobalt oxide, have shown potential for CO hydrogenation, with performance heavily reliant on crystal phase and morphology.

High-Throughput Selection and Experimental Realization of Two New Ce-Based Nitride Perovskites: CeMoN and CeWN.

Nitride perovskites have only been experimentally realized in very few cases despite the widespread existence and commercial importance of perovskite materials. From oxide perovskites used in ultrasonics to halide perovskites that have revolutionized the photovoltaics industry, the discovery of new perovskite materials has historically impacted a wide number of fields. Here, we add two new perovskites, CeWN and CeMoN, to the list of experimentally realized perovskite nitrides using high-throughput computational screening and subsequent high-throughput thin film growth techniques.

Synthesis of LaWN nitride perovskite with polar symmetry.

Oxide materials with the perovskite structure have been used in sensors and actuators for half a century, and halide perovskites transformed photovoltaics research in the past decade. Nitride perovskites have been computationally predicted to be stable, but few have been synthesized, and their properties remain largely unknown. We synthesized and characterized a nitride perovskite lanthanum tungsten nitride (LaWN) in the form of oxygen-free sputtered thin films, according to spectroscopy, scattering, and microscopy techniques.

Back-Surface Passivation of CdTe Solar Cells Using Solution-Processed Oxidized Aluminum.

Although back-surface passivation plays an important role in high-efficiency photovoltaics, it has not yet been definitively demonstrated for CdTe. Here, we present a solution-based process, which achieves passivation and improved electrical performance when very small amounts of oxidized Al species are deposited at the back surface of CdTe devices. The open circuit voltage () is increased and the fill factor (FF) and photoconversion efficiency (PCE) are optimized when the total amount added corresponds to ∼1 monolayer, suggesting that the passivation is surface specific.

SnO-Catalyzed Oxidation in High-Efficiency CdTe Solar Cells.

Interfaces at the front of superstrate CdTe-based solar cells are critical to carrier transport, recombination, and device performance, yet determination of the chemical structure of these nanoscale regions has remained elusive. This is partly due to changes that occur at the front interfaces during high temperature growth and substantive changes occurring during postdeposition processing. In addition, these buried interfaces are extremely difficult to access in a way that preserves chemical information.

Combinatorial Nitrogen Gradients in Sputtered Thin Films.

High-throughput synthesis and characterization methods can significantly accelerate the rate of experimental research. For physical vapor deposition (PVD), these methods include combinatorial sputtering with intentional gradients of metal/metalloid composition, temperature, and thickness across the substrate. However, many other synthesis parameters still remain out of reach for combinatorial methods.

Two-Dimensional Cadmium Chloride Nanosheets in Cadmium Telluride Solar Cells.

In this study we make use of a liquid nitrogen-based thermomechanical cleavage technique and a surface analysis cluster tool to probe in detail the tin oxide/emitter interface at the front of completed CdTe solar cells. We show that this thermomechanical cleavage occurs within a few angstroms of the SnO/emitter interface. An unexpectedly high concentration of chlorine at this interface, ∼20%, was determined from a calculation that assumed a uniform chlorine distribution.

Revisiting the Valence and Conduction Band Size Dependence of PbS Quantum Dot Thin Films.

We use a high signal-to-noise X-ray photoelectron spectrum of bulk PbS, GW calculations, and a model assuming parabolic bands to unravel the various X-ray and ultraviolet photoelectron spectral features of bulk PbS as well as determine how to best analyze the valence band region of PbS quantum dot (QD) films. X-ray and ultraviolet photoelectron spectroscopy (XPS and UPS) are commonly used to probe the difference between the Fermi level and valence band maximum (VBM) for crystalline and thin-film semiconductors. However, we find that when the standard XPS/UPS analysis is used for PbS, the results are often unrealistic due to the low density of states at the VBM.

Co-solvent enhanced zinc oxysulfide buffer layers in Kesterite copper zinc tin selenide solar cells.

A co-solvent, dimethylsulfoxide (DMSO), is added to the aqueous chemical "bath" deposition (CBD) process used to grow ZnOS buffer layers for thin film Cu2ZnSnSe4 (CZTSe) solar cells. Device performance improves markedly as fill factors increase from 0.17 to 0.

Substrate-controlled band positions in CH₃NH₃PbI₃ perovskite films.

Using X-ray and ultraviolet photoelectron spectroscopy, the surface band positions of solution-processed CH3NH3PbI3 perovskite thin films deposited on an insulating substrate (Al2O3), various n-type (TiO2, ZrO2, ZnO, and F:SnO2 (FTO)) substrates, and various p-type (PEDOT:PSS, NiO, and Cu2O) substrates are studied. Many-body GW calculations of the valence band density of states, with spin-orbit interactions included, show a clear correspondence with our experimental spectra and are used to confirm our assignment of the valence band maximum. These surface-sensitive photoelectron spectroscopy measurements result in shifting of the CH3NH3PbI3 valence band position relative to the Fermi energy as a function of substrate type, where the valence band to Fermi energy difference reflects the substrate type (insulating-, n-, or p-type).

Role of dopants in long-range charge carrier transport for p-type and n-type graphene transparent conducting thin films.

Monolayer to few-layer graphene thin films have several attractive properties such as high transparency, exceptional electronic transport, mechanical durability, and environmental stability, which are required in transparent conducting electrodes (TCs). The successful incorporation of graphene TCs into demanding applications such as thin film photovoltaics requires a detailed understanding of the factors controlling long-range charge transport. In this study, we use spectroscopic and electrical transport measurements to provide a self-consistent understanding of the macroscopic (centimeter, many-grain scale) transport properties of chemically doped p-type and n-type graphene TCs.

PbSe quantum dot field-effect transistors with air-stable electron mobilities above 7 cm2 V(-1) s(-1).

PbSe quantum dot (QD) field effect transistors (FETs) with air-stable electron mobilities above 7 cm(2) V(-1) s(-1) are made by infilling sulfide-capped QD films with amorphous alumina using low-temperature atomic layer deposition (ALD). This high mobility is achieved by combining strong electronic coupling (from the ultrasmall sulfide ligands) with passivation of surface states by the ALD coating. A series of control experiments rule out alternative explanations.

Iron pyrite thin films synthesized from an Fe(acac)3 ink.

Iron pyrite (cubic FeS2) is a promising candidate absorber material for earth-abundant thin-film solar cells. Here, we report on phase-pure, large-grain, and uniform polycrystalline pyrite films that are fabricated by solution-phase deposition of an iron(III) acetylacetonate molecular ink followed by sequential annealing in air, H2S, and sulfur gas at temperatures up to 550 °C. Phase and elemental compositions of the films are characterized by conventional and synchrotron X-ray diffraction, Raman spectroscopy, Auger electron spectroscopy, secondary ion mass spectrometry, and X-ray photoelectron spectroscopy (XPS).

Robust, functional nanocrystal solids by infilling with atomic layer deposition.

Thin films of colloidal semiconductor nanocrystals (NCs) are inherently metatstable materials prone to oxidative and photothermal degradation driven by their large surface-to-volume ratios and high surface energies. (1) The fabrication of practical electronic devices based on NC solids hinges on preventing oxidation, surface diffusion, ripening, sintering, and other unwanted physicochemical changes that can plague these materials. Here we use low-temperature atomic layer deposition (ALD) to infill conductive PbSe NC solids with metal oxides to produce inorganic nanocomposites in which the NCs are locked in place and protected against oxidative and photothermal damage.

n-Type transition metal oxide as a hole extraction layer in PbS quantum dot solar cells.

The n-type transition metal oxides (TMO) consisting of molybdenum oxide (MoO(x)) and vanadium oxide (V(2)O(x)) are used as an efficient hole extraction layer (HEL) in heterojunction ZnO/PbS quantum dot solar cells (QDSC). A 4.4% NREL-certified device based on the MoO(x) HEL is reported with Al as the back contact material, representing a more than 65% efficiency improvement compared with the case of Au contacting the PbS quantum dot (QD) layer directly.

Microstructure and pseudocapacitive properties of electrodes constructed of oriented NiO-TiO2 nanotube arrays.

We report on the synthesis and electrochemical properties of oriented NiO-TiO(2) nanotube (NT) arrays as electrodes for supercapacitors. The morphology of the films prepared by electrochemically anodizing Ni-Ti alloy foils was characterized by scanning and transmission electron microscopies, X-ray diffraction, and photoelectron spectroscopies. The morphology, crystal structure, and composition of the NT films were found to depend on the preparation conditions (anodization voltage and postgrowth annealing temperature).

Structural, optical, and electrical properties of self-assembled films of PbSe nanocrystals treated with 1,2-ethanedithiol.

We describe the structural, optical, and electrical properties of high-quality films of PbSe nanocrystals fabricated by a layer-by-layer (LbL) dip-coating method that utilizes 1,2-ethanedithiol (EDT) as an insolubilizing agent. Comparative characterization of nanocrystal films made by spin-coating and by the LbL process shows that EDT quantitatively displaces oleic acid on the PbSe surface, causing a large volume loss that electronically couples the nanocrystals while severely degrading their positional and crystallographic order of the films. Field-effect transistors based on EDT-treated films are moderately conductive and ambipolar in the dark, becoming p-type and 30-60 times more conductive under 300 mW cm(-2) broadband illumination.

Structural, optical, and electrical properties of PbSe nanocrystal solids treated thermally or with simple amines.

We describe the structural, optical, and electrical properties of films of spin-cast, oleate-capped PbSe nanocrystals that are treated thermally or chemically in solutions of hydrazine, methylamine, or pyridine to produce electronically coupled nanocrystal solids. Postdeposition heat treatments trigger nanocrystal sintering at approximately 200 degrees C, before a substantial fraction of the oleate capping group evaporates or pyrolyzes. The sintered nanocrystal films have a large hole density and are highly conductive.