Effect of Low Ambient Temperature on Emissions and Electric Range of Plug-In Hybrid Electric Vehicles.

Plug-in hybrid electrical vehicles (PHEVs) are generally considered to be a cleaner alternative to conventional passenger cars. However, there is still very limited information available regarding criteria pollutant emissions from these vehicles. This paper shows, for the first time, the emissions of criteria pollutants, unregulated pollutants, and CO and also electric range from two very different PHEVs, one Euro 6 parallel plug-in hybrid and one range-extended battery electric vehicle (BEVx), applying the new world harmonized light-duty test procedure at ambient temperatures equal to 23 and -7 °C.

On-road emissions of passenger cars beyond the boundary conditions of the real-driving emissions test.

Passenger cars are an important source of air pollution, especially in urban areas. Recently, real-driving emissions (RDE) test procedures have been introduced in the EU aiming to evaluate nitrogen oxides (NOx) and particulate number (PN) emissions from passenger cars during on-road operation. Although RDE accounts for a large variety of real-world driving, it excludes certain driving situations by setting boundary conditions (e.

Reducing the exhaust emissions of unregulated pollutants from small gasoline engines with alkylate fuel and low-ash lube oil.

We report exhaust emissions of regulated and unregulated gaseous compounds (aromatic, oxygenated, and nitrogen-containing compounds), particle mass and soot content for a series of 5 utility hand-held machines typically used in gardening and forestry operation in Europe. The engines were tested in the Vehicle Emissions Laboratory of the European Commission - Joint Research Centre. Two fuels, standard and alkylate fuel (trace content of aromatics), and 2 lubricant oils (semi-synthetic and low-ash) were used.

Impact of cold temperature on Euro 6 passenger car emissions.

Hydrocarbons, CO, NOx, NH, NO, CO and particulate matter emissions affect air quality, global warming and human health. Transport sector is an important source of these pollutants and high pollution episodes are often experienced during the cold season. However, EU vehicle emissions regulation at cold ambient temperature only addresses hydrocarbons and CO vehicular emissions.

NO, NH, NO and PN real driving emissions from a Euro VI heavy-duty vehicle. Impact of regulatory on-road test conditions on emissions.

Euro VI emission standards for heavy-duty vehicles (HDVs) introduced for the first time limits for solid particle number (PN) and NH emissions. EU regulation also includes a Portable Emissions Measurement System (PEMS) based test at type approval, followed by in-service conformity (ISC) testing. A comprehensive study on the real-time on-road emissions of NO, NH, NO and PN from a Euro VI HDV equipped with a Diesel Oxidation Catalyst (DOC), a Diesel Particle Filter (DPF), a Selective Catalytic Reduction (SCR) system and an Ammonia Oxidation Catalyst (AMOX) is presented.

Intercomparison of real-time tailpipe ammonia measurements from vehicles tested over the new world-harmonized light-duty vehicle test cycle (WLTC).

Four light-duty vehicles (two diesel, one flex-fuel, and one gasoline vehicle) were tested as part of an intercomparison exercise of the world-harmonized light-duty vehicle test procedure (WLTP) aiming at measuring real-time ammonia emissions from the vehicles' raw exhaust at the tailpipe. The tests were conducted in the Vehicle Emission Laboratory (VELA) at the European Commission Joint Research Centre (EC-JRC), Ispra, Italy. HORIBA, CGS, and the Sustainable Transport Unit of the Joint Research Centre (JRC) took part in the measurement and analysis of the four vehicles' exhaust emissions over the world-harmonized light-duty vehicle test cycle class 3, version 5.

Quantifying the impact of residential heating on the urban air quality in a typical European coal combustion region.

The present investigation, carried out as a case study in a typical major city situated in a European coal combustion region (Krakow, Poland), aims at quantifying the impact on the urban air quality of residential heating by coal combustion in comparison with other potential pollution sources such as power plants, industry, and traffic. Emissions were measured for 20 major sources, including small stoves and boilers, and the particulate matter (PM) was analyzed for 52 individual compounds together with outdoor and indoor PM10 collected during typical winter pollution episodes. The data were analyzed using chemical mass balance modeling (CMB) and constrained positive matrix factorization (CMF) yielding source apportionments for PM10, B(a)P, and other regulated air pollutants namely Cd, Ni, As, and Pb.

Effect of water/fuel emulsions and a cerium-based combustion improver additive on HD and LD diesel exhaust emissions.

One of the major technological challenges for the transport sector is to cut emissions of particulate matter (PM) and nitrogen oxides (NOx) simultaneously from diesel vehicles to meet future emission standards and to reduce their contribution to the pollution of ambient air. Installation of particle filters in all existing diesel vehicles (for new vehicles, the feasibility is proven) is an efficient but expensive and complicated solution; thus other short-term alternatives have been proposed. It is well known that water/diesel (W/ D) emulsions with up to 20% water can reduce PM and NOx emissions in heavy-duty (HD) engines.