The Chick Embryo Chorioallantoic Membrane (CAM) Assay: A Novel Experimental Model in Dental Research.

Animal experimental models are ruled out by respecting the 3Rs (Replacement, Reduction, Refinement) rules which governed the experimental research for decades with an increased tendency to minimize as much as it is possible any pain suffering or distress that the animals might feel. The chick embryo chorioallantoic membrane (CAM) model is an alternative to other experimental models due to its superior properties compared to other animal models. The CAM is painless by itself due to the lack of innervation and has no immune cells till the 11th day of incubation.

Mechanical Assessment of Denture Polymers Processing Technologies.

Background: Removable prostheses have seen a fundamental change recently because of advances in polymer materials, allowing improved durability and performance. Despite these advancements, notable differences still occur amongst various polymer materials and processing technologies, requiring a thorough grasp of their mechanical, physical, and therapeutic implications. The compressive strength of dentures manufactured using various technologies will be investigated.

Dentigerous Cysts in Children: Clinical, Radiological, and Healing Aspects.

: Dentigerous cysts are one of the most frequent pathologies associated with unerupted or impacted teeth. Such cysts show a male predilection and a preference for the mandibular region. Also, they commonly occur in the second and third decades of life, with only 9% occurring in the first decade.

Efficacy and Safety of Botulinum Toxin in the Management of Temporomandibular Symptoms Associated with Sleep Bruxism: A Systematic Review.

Sleep bruxism, characterized by involuntary grinding or clenching of teeth during sleep, poses significant challenges in management due to its potential to induce temporomandibular joint disorders (TMDs) and other related symptoms. The use of Botulinum toxin Type A (BoNT-A), also known as Botox, has been proposed as a therapeutic intervention. This systematic review aims to evaluate the efficacy and safety of BoNT-A in the management of sleep bruxism, focusing on pain reduction, improvement in jaw function, reduction in bruxism episodes, and the incidence of adverse effects.

Conventional Dental Impressions vs. Impressions Reinforced with Rigid Mouthguards.

The impression materials utilized today in dental medicine offer a good reproducibility and are easily accepted by patients. However, because they are polymer-based, they have issues regarding their dimensional stability. In this respect, the present work proposes a new type of dental impression, which is reinforced with rigid mouthguards.

The Influence of a Novel, Crenelated Design of CAD-CAM Ceramic Veneers on the Debonding Strength.

(1) Background: Aesthetic dentistry has become one of the most dynamic fields in modern dental medicine. Ceramic veneers represent the most appropriate prosthetic restorations for smile enhancement, due to their minimal invasiveness and highly natural appearance. For long-term clinical success, accurate design of both tooth preparation and ceramic veneers is of paramount importance.

Electromyographic Evaluation of Muscle Activity in Patients Rehabilitated with Full Arch Fixed Implant-Supported Prostheses.

: Implant rehabilitation of complete edentulous arches has become more and more popular because of the increased access of the population to this type of treatment. Furthermore, the development of new rehabilitation procedures can be applied in most clinical cases, including in those with severe atrophy. Hence, this study aimed to assess the functional changes that can occur in the stomatognathic system after implant rehabilitation procedures.

Influence of the Text Neck Posture on the Static Dental Occlusion.

The excessive use of smartphones for various tasks led to a new adverse postural phenomenon called text neck. The aim of this study was to investigate the effect of the text neck posture (TNP) on static occlusion by using the T-Scan III occlusal diagnostic system. : Nineteen subjects (aged 20 to 24 years) were considered for this research.

Ceramic Scaffolds for Bone Augmentation: Design and Characterization with SEM and Confocal Microscopy.

Bone scaffolds must fulfil numerous and sometimes contradictory characteristics: biocompatibility, bioactivity, high porosity, and appropriate mechanical strength. To tackle some of these issues, this study has several aims for the development of such scaffolds for dentistry applications: (i) to utilize appropriate materials (ceramics and sponges) and to introduce a novel, potentially performant ceramic material; (ii) to characterize the obtained scaffolds by using a range of methods; (iii) to compare and to correlate the assessment results with the scope to validate them reciprocally. There are two commercially available dental ceramics (i.

Comparative Assessment of the Shaping Ability of Reciproc Blue, WaveOne Gold, and ProTaper Gold in Simulated Root Canals.

Maintaining the original trajectory of the root canal is a major challenge in endodontic therapy, especially in narrow and curved root canals. The present study aims to assess the shaping capacity of three endodontic systems made of different nickel−titanium alloys on simulated curved root canals. Thirty-six endodontic resin blocks (Ref.

Endodontic fillings evaluated using en face OCT, microCT and SEM.

Objectives: The goal of endodontic therapy is mechanically cleaning and shaping the root canal system, the removal of organic and inorganic debris followed by sealing with permanent filling materials.

Materials And Methods: Therefore, the aim of this in vitro study was to engage three imagistic methods: (i) en face (ef) time domain (TD) optical coherence tomography (OCT), (ii) micro-computed tomography (μCT), and (iii) scanning electron microscopy (SEM), in terms of their efficiency in assessing the quality of endodontic fillings. So far, is settled that efOCT images can identify defects∕voids in several of the investigated root canal fillings and identify gaps of 50 μm.

Emerging Technologies for Dentin Caries Detection-A Systematic Review and Meta-Analysis.

This systematic review and meta-analysis aimed at assessing the diagnostic accuracy of emerging technologies, such as laser fluorescence (LF), transillumination, light-emitting diode devices, optical coherence tomography (OCT), alternating current impedance spectroscopy, fluorescence cameras (FC), photo-thermal radiometry, and modulated luminescence technology. In vivo and in vitro results of such non-ionizing, non-invasive, and non-destructive methods' effectiveness in non-cavitated dentin caries detection are sometimes ambiguous. Following the PRISMA guidelines, 34 relevant research articles published between 2011-2021 were selected.

Morphological aspects in remineralizing potential of Silver Diamine Fluoride.

Objectives: The purpose of this study was to demonstrate the efficacy of Silver Diamine Fluoride (SDF) antibacterial solution in penetrating the demineralized areas of enamel.

Materials And Methods: It was considered a group of four extracted teeth (with no color fading, fissures, decay, or demineralization). Each tooth was sectioned in two equal parts, in mesio-distal direction, using a dental handpiece and a special rounded, flat bur.

Sinus Lift and Implant Insertion on 3D-Printed Polymeric Maxillary Models: Ex Vivo Training for In Vivo Surgical Procedures.

Background And Objectives: The aim of this study is to demonstrate the increased efficiency achieved by dental practitioners when carrying out an ex vivo training process on 3D-printed maxillaries before performing in vivo surgery.

Materials And Methods: This developed ex vivo procedure comprises the following phases: (i) scanning the area of interest for surgery; (ii) obtaining a 3D virtual model of this area using Cone Beam Computed Tomography (CBCT); (iii) obtaining a 3D-printed model (based on the virtual one), on which (iv) the dental practitioner simulates/rehearses ex vivo (most of) the surgery protocol; (v) assess with a new CBCT the 3D model after simulation. The technical steps of sinus augmentation and implant insertion could be performed on the corresponding 3D-printed hemi-maxillaries prior to the real in vivo surgery.

Evaluation of the Shaping Ability of Three Thermally Treated Nickel-Titanium Endodontic Instruments on Standardized 3D-printed Dental Replicas Using Cone-Beam Computed Tomography.

The aim of the present study is to compare the efficacy of three root canal preparation systems in the shaping of 3D-printed root canal replicas of single rooted teeth. : Sixty 3D-printed root canal replicas were produced and divided into three groups, each consisting of twenty samples. Each group was shaped with a different instrument: Reciproc Blue R25/08 (VDW GmbH, Munich, Gemany), WaveOne Gold Primary 25/07 (Dentsply Sirona, Ballaigues, Switzerland), and ProTaper Gold F2 25/08 (Denstply Sirona).

Micro-CT and Microscopy Study of Internal and Marginal Gap to Tooth Surface of Crenelated versus Conventional Dental Indirect Veneers.

: Ceramic veneers represent the most appropriate treatment option for minimally invasive aesthetic rehabilitation. For long-term clinical success, the accurate marginal and internal adaptation of dental restorations are of paramount importance. The aim of this in vitro study is to assess the effect of a novel (patented) design of veneers compared to conventional ones on their marginal and internal gap to the prepared tooth surface.

Carbon Nanotubes for Improved Performances of Endodontic Sealer.

In order to overcome the limitations of current endodontic sealers, especially against resistant bacteria, recent developments in the field of nanotechnology have proved the necessity to reconsider the composition and physico-chemical properties of classical sealers. Nanoparticles with their unique features in terms of small size and high specific surface area, are the best choice for incorporation of antiseptic agents and effective delivery. The aim of our study is to prepare a novel platform for antibacterial drug delivery in dental adhesive systems used in endodontics.

optical coherence tomography analysis of gold and silver nanoparticles in endodontic irrigating solutions: An study.

Optical coherence tomography (OCT) is a non-invasive, non-radioactive optical diagnostic method based on low-coherence interferometry, which achieves images with different orientation. In dentistry, its major advantage is represented by the localization and characterization of the smallest defects in hard dental tissues, dental materials and of the smallest details in dental anatomy (supplementary canals, recesses, isthmuses, or intra-radicular connections). The aim of the present study was to evaluate using c-scan optical coherence tomography, the optical opacity, and the distribution inside the root canal lumen of several extracted human teeth of silver and gold nanoparticles from special irrigating solutions used in endodontic treatment.

Optimization of X-ray Investigations in Dentistry Using Optical Coherence Tomography.

The most common imaging technique for dental diagnoses and treatment monitoring is X-ray imaging, which evolved from the first intraoral radiographs to high-quality three-dimensional (3D) Cone Beam Computed Tomography (CBCT). Other imaging techniques have shown potential, such as Optical Coherence Tomography (OCT). We have recently reported on the boundaries of these two types of techniques, regarding.

Scaffold-Type Structure Dental Ceramics with Different Compositions Evaluated through Physicochemical Characteristics and Biosecurity Profiles.

The design and development of ceramic structures based on 3D scaffolding as dental bone substitutes has become a topic of great interest in the regenerative dentistry research area. In this regard, the present study focuses on the development of two scaffold-type structures obtained from different commercial dental ceramics by employing the foam replication method. At the same time, the study underlines the physicochemical features and the biological profiles of the newly developed scaffolds, compared to two traditional Cerabone materials used for bone augmentation, by employing both the in vitro Alamar blue proliferation test at 24, 48 and 96 h poststimulation and the in ovo chick chorioallantoic membrane (CAM) assay.

Cognitive dysfunction in young subjects with periodontal disease.

Background: Periodontal disease is an inflammatory, dysbiotic condition. Studies have shown that in the elderly, periodontal disease was associated with cognitive dysfunction and Alzheimer's disease.

Objective: To investigate whether young healthy subjects with periodontal disease have lower cognition compared to those without periodontal disease.

Complementarity of Photo-Biomodulation, Surgical Treatment, and Antibiotherapy for Medication-Related Osteonecrosis of the Jaws (MRONJ).

: Antiresorptive or anti-angiogenic agents may induce medication-related osteonecrosis of the jaws (MRONJ), which represents a challenge for clinicians. The aim of this study is to design and apply a composed and stage-approach therapy combining antibiotherapy, surgical treatment, and photo-biomodulation (PBM) for the prevention or treatment of MRONJ lesions. : The proposed treatment protocol was carried out in the Department of Oral & Maxillofacial Surgery of the "Victor Babes" University of Medicine and Farmacy of Timisoara, in 2018-2020.

Nutritional, Antioxidant, Antimicrobial, and Toxicological Profile of Two Innovative Types of Vegan, Sugar-Free Chocolate.

Increased sugar consumption and unhealthy dietary patterns are key drivers of many preventable diseases that result in disability and death worldwide. However, health awareness has increased over the past decades creating a massive on-going demand for new low/non-caloric natural sweeteners that have a high potential and are safer for consumption than artificial ones. The current study aims to investigate the nutritional properties, in vitro toxicological profile, total/individual polyphenols content, and the antioxidant, anti-cariogenic, and antimicrobial activity of two newly obtained vegan and sugar-free chocolate (VHC1 and VHC2).

Dental Diagnosis and Treatment Assessments: Between X-rays Radiography and Optical Coherence Tomography.

A correct diagnosis in dental medicine is typically provided only after clinical and radiological evaluations. They are also required for treatment assessments. The aim of this study is to establish the boundaries from which a modern, although established, imaging technique, Optical Coherence Tomography (OCT), is more suitable than the common X-ray radiography to assess dental issues and treatments.

A Custom-Made Orthodontic Mini-Implant-Effect of Insertion Angle and Cortical Bone Thickness on Stress Distribution with a Complex In Vitro and In Vivo Biosafety Profile.

Background: Orthodontic mini-implant failure is a debatable subject in clinical practice. However, the most important parameter to evaluate the success rate of mini-implant is the primary stability, which is mainly influenced by cortical bone thickness (CBT) and insertion angle.

Materials And Methods: Three-dimensional finite element models of the maxilla were created and a custom-made, self-drilling, tapered mini-implant was designed.