Terpolymer-chitosan membranes as biomaterial.

The present study shows a novel copolymer synthesis, its application in the membrane design and the physicochemical and biological characterization of the biomaterial obtained. Terpolymer starting diisopropyl fumarate (F), vinyl benzoate (V) and 2-hydroxyethyl methacrylate (H) was prepared by thermal radical polymerization. This polymer (FVH) was obtained in several monomer ratios and characterized by spectroscopic and chromatographic methods (FTIR, H-NMR and SEC).

Nanobiocomposite based on natural polyelectrolytes for bone regeneration.

We developed a composite hydrogel based on chitosan and carboxymethyl cellulose with nanometric hydroxyapatite (nHA) as filler (ranging from 0.5 to 5%), by ultrasonic methodology to be used for bone regeneration. The 3D porous-structure of the biocomposite scaffolds were confirmed by Scanning Electron Microscopy and Microtomography analysis.

Dissecting the pathways coordinating patterning and growth by plant boundary domains.

Boundary domains play important roles during morphogenesis in plants and animals, but how they contribute to patterning and growth coordination in plants is not understood. The CUC genes determine the boundary domains in the aerial part of the plants and, in particular, they have a conserved role in regulating leaf complexity across Angiosperms. Here, we used tooth formation at the Arabidopsis leaf margin controlled by the CUC2 transcription factor to untangle intertwined events during boundary-controlled morphogenesis in plants.

Corrosion protection of AZ31 alloy and constrained bacterial adhesion mediated by a polymeric coating obtained from a phytocompound.

The prevention of microbial biofilm formation on a biomaterial surface is crucial in avoiding implants failures and the development of antibiotic resistant bacteria. It was reported that biodegradable Mg alloys may show antimicrobial effects due to the alkalinization of the corroding area. However, this issue is controversial and deserves a detailed study, since the processes occurring at the [biodegradable metal/biological medium] interface are complex and varied.

GDP-L-fucose is required for boundary definition in plants.

The CUP-SHAPED COTYLEDON (CUC) transcription factors control plant boundary formation, thus allowing the emergence of novel growth axes. While the developmental roles of the CUC genes in different organs and across species are well characterized, upstream and downstream events that contribute to their function are still poorly understood. To identify new players in this network, we performed a suppressor screen of CUC2g-m4, a line overexpressing CUC2 that has highly serrated leaves.

Nanostructured fumarate copolymer-chitosan crosslinked scaffold: An in vitro osteochondrogenesis regeneration study.

In the tissue engineering field, the design of the scaffold inspired on the natural occurring tissue is of vital importance. Ideally, the scaffold surface must promote cell growth and differentiation, while promote angiogenesis in the in vivo implant of the scaffold. On the other hand, the material selection must be biocompatible and the degradation times should meet tissue reparation times.

Risedronate transdermal delivery system based on a fumaric copolymer for therapy of osteoporosis.

Transdermal drug delivery system (TDDS) could be seen as alternative to the oral administration which avoids several adverse effects. In this study a novel TDDS for risedronate (RI), a bisphosphonate used for osteoporosis treatment, based on a vinyl acetate-dioctylfumarate copolymer, poly(VA-co-DOF), previously synthetized, was developed. Two membranes including 6 and 12% (w/w) of drug were obtained, which exhibited good transparence and homogeneous drug distribution, as evaluated by optical microscopy.

Multiscale quantification of morphodynamics: MorphoLeaf software for 2D shape analysis.

A major challenge in morphometrics is to analyse complex biological shapes formed by structures at different scales. Leaves exemplify this challenge as they combine differences in their overall shape with smaller shape variations at their margin, leading to lobes or teeth. Current methods based on contour or on landmark analysis are successful in quantifying either overall leaf shape or leaf margin dissection, but fail in combining the two.

Ultrasonic compatibilization of polyelectrolyte complex based on polysaccharides for biomedical applications.

In recent years, there has been an increasing interest in the design of biomaterials for cartilage tissue engineering. This type of materials must meet several requirements. In this study, we apply ultrasound to prepare a compatibilized blend of polyelectrolyte complexes (PEC) based on carboxymethyl cellulose (CMC) and chitosan (CHI), in order to improve stability and mechanical properties through the inter-polymer macroradicals coupling produced by sonochemical reaction.

A conserved role for CUP-SHAPED COTYLEDON genes during ovule development.

The evolution of plant reproductive strategies has led to a remarkable diversity of structures, especially within the flower, a structure characteristic of the angiosperms. In flowering plants, sexual reproduction depends notably on the development of the gynoecium that produces and protects the ovules. In Arabidopsis thaliana, ovule initiation is promoted by the concerted action of auxin with CUC1 (CUP-SHAPED COTYLEDON1) and CUC2, two genes that encode transcription factors of the NAC family (NAM/ATAF1,2/CUC).

Tautomerizable β-ketonitrile copolymers for bone tissue engineering: Studies of biocompatibility and cytotoxicity.

β-Ketonitrile tautomeric copolymers have demonstrated tunable hydrophilicity/hydrophobicity properties according to surrounding environment, and mechanical properties similar to those of human bone tissue. Both characteristic properties make them promising candidates as biomaterials for bone tissue engineering. Based on this knowledge we have designed two scaffolds based on β-ketonitrile tautomeric copolymers which differ in chemical composition and surface morphology.

Fumarate copolymers-based membranes overlooking future transdermal delivery devices: synthesis and properties.

Novel copolymers of vinyl acetate and dialkylfumarates, poly(VA-co-DRF) with R = isopropyl (DIPF) or octan-2-yl (DOF), were synthesized by radical copolymerization under microwave conditions. The products were characterized by (1)H NMR and FTIR spectroscopies, size exclusion chromatography and differential scanning calorimetry. Based on these copolymers three membranes supported on polyvinyl alcohol were prepared and their morphology, swelling and mechanical properties were studied.

Cryopreservation of somatic embryogenic cultures of Pinus pinaster: effects on regrowth and embryo maturation.

Pinus pinaster is one of the most economically important conifers in the world. Somatic embryogenesis is a powerful tool in breeding programmes because it allows the generation of a great number of different clonal lines from seeds of superior genotypes. Unfortunately, embryogenic competence decreases with the age of cultures.

Characterization of a type-A response regulator differentially expressed during adventitious caulogenesis in Pinus pinaster.

The molecular cloning and characterization of PipsRR1, a type-A response regulator in Pinus pinaster, is reported here. Type-A response regulators mediate downstream responses to cytokinin and act as negative feedback regulators of the signal transduction pathway. Some type-A response regulators in Arabidopsis have been related to de novo meristem formation.

Chlorhexidine delivery system from titanium/polybenzyl acrylate coating: evaluation of cytotoxicity and early bacterial adhesion.

Objectives: The formation of biofilms on titanium dental implants is one of the main causes of failure of these devices. Streptococci are considered early colonizers that alter local environment favouring growing conditions for other colonizers. Chlorhexidine (CHX) is so far the most effective antimicrobial treatment against a wide variety of Gram-positive and Gram-negative organisms as well as fungi.

Development of an osteoconductive PCL-PDIPF-hydroxyapatite composite scaffold for bone tissue engineering.

Hydroxyapatite (HAP)-containing poly-ε-caprolactone (PCL)-polydiisopropyl fumarate (PDIPF) composite (Blend) was developed as an alternative for bone tissue engineering. The physicochemical, mechanical and biocompatibility properties of these composites were evaluated using two osteoblast-like cell lines (UMR106 and MC3T3E1) and compared with the blend without HAP and PCL/HAP films. The increment in the elastic modulus and the decrease in the elongation-at-break of Blend-HAP suggest that the mechanical properties of the HAP scaffolds have improved significantly.

Determination of thermodynamic parameters of tautomerization in gas phase by mass spectrometry and DFT calculations: Keto-enol versus nitrile-ketenimine equilibria.

The study of tautomerics equilibria is really important because the reactivity of each compound with tautomeric capacity can be determined from the proportion of each tautomer. In the present work the tautomeric equilibria in some γ,δ-unsaturated β-hydroxynitriles and γ,δ-unsaturated β-ketonitriles were studied. The first family of compounds presents two possible theoretical tautomers, nitrile and ketenimine, while the second one presents four possible theoretical tautomers, keto-nitrile, enol (E and Z)-nitrile and keto-ketenimine.

3-Hydroxy-4-methyl-4-pentenonitrile and 4-methyl-3-oxo-4-pentenonitrile: Study of the tautomerics equilibria in gas phase and in solution.

In the present work the tautomerics equilibria in 3-hydroxy-4-methyl-4-pentenonitrile and 4-methyl-3-oxo-4-pentenonitrile have been studied. The first compound presents two possible theoretical tautomers, nitrile and ketenimine. The second compound presents four possible theoretical tautomers ketonitrile, nitrile-enol (E and Z) and keto-ketenimine.

Characterization of poly(epsilon-caprolactone)/polyfumarate blends as scaffolds for bone tissue engineering.

There is considerable interest in the design of polymeric biomaterials that can be used for the repair of bone defects. In this study, we used ultrasound to prepare a compatibilized blend of poly(epsilon-caprolactone) (PCL) and poly(diisopropyl fumarate) (PDIPF). The formation of post-sonication inter-polymer coupling products was verified by SEC analysis of a blend with azo-labeled PDIPF.

Cloning and characterization of a type-A response regulator differentially expressed during adventitious shoot formation in Pinus pinea L.

Type-A response regulators play an important role in cytokinin-induced adventitious shoot formation, acting as negative regulators of cytokinin signal transduction. In this work, we obtained the full-length cDNA clone of a type-A response regulator from the conifer Pinus pinea, designated PipiRR1. The derived peptide sequence showed all the characteristic motifs found in angiosperms.

Benzyladenine metabolism and temporal competence of Pinus pinea cotyledons to form buds in vitro.

Germination negatively affects adventitious shoot formation induced by cytokinins in pine cotyledons. To investigate the causes of this decrease in the organogenic response, uptake and metabolism of benzyladenine (BA) were studied in stone pine cotyledons (Pinus pinea) isolated from in vitro germinating embryos and cultured in bud induction medium. As embryos grew, cotyledons showed a progressive decrease in the amount of BA taken up from the medium.