The Roles of Impurities and Surface Area on Thermal Stability and Oxidation Resistance of BN Nanoplatelets.

This study considers the influence of purity and surface area on the thermal and oxidation properties of hexagonal boron nitride (h-BN) nanoplatelets, which represent crucial factors in high-temperature oxidizing environments. Three h-BN nanoplatelet-based materials, synthesized with different purity levels and surface areas (~3, ~56, and ~140 m/g), were compared, including a commercial BN reference. All materials were systematically analyzed by various characterization techniques, including gas pycnometry, scanning electron microscopy, X-ray diffraction, Fourier-transform infrared radiation, X-ray photoelectron spectroscopy, gas sorption analysis, and thermal gravimetric analysis coupled with differential scanning calorimetry.

Radionuclide Removal from Aqueous Solutions Using Oxidized Carbon Fabrics.

The adsorption of actinide ions (Am(III) and U(VI)) from aqueous solutions using pristine and oxidized carbon fabrics was investigated by means of batch experiments at different pH values (pH 4, 7 and 9) and temperatures (25, 35 and 45 °C) under ambient atmospheric conditions. The experimental results indicated that both the pH and the fabric texture affected the adsorption rate and the relative removal efficiency, which was 70% and 100% for Am(III) and U(VI), respectively. The K (L/kg) values for U(VI) were generally found to be higher (2 < log(K)< 3) than the corresponding values for Am(III) adsorption (1.

Microstructural features, physicο-mechanical properties, and wear behavior of dental translucent polychromic multilayer zirconia of hybrid composition prepared by milling technology.

Objective: The present study determined the mechanical properties and the wear behavior, as results of the micro(nano)structure, of the enamel, transition, and dentine layers, which comprise the polychromic multilayer zirconia materials of hybrid composition fabricated by milling technology.

Materials And Methods: Prismatic blocks were fabricated from two commercial pre-sintered dental polychromic multilayer zirconia materials of hybrid composition, IPS e.max ZirCAD Prime (medium and high translucency, from the dentine to the incisal layer) and 3D Pro ML (translucency gradient, from the dentine to the incisal layer) by milling technique, and then, cut into 3 distinct parts to separate the enamel, transition, and dentine layers.

Biogas upgrading to methane and removal of volatile organic compounds in a system of zero-valent iron and anaerobic granular sludge.

The current study presented a novel process of biogas upgrading to biomethane (higher than 97%) based on anaerobic sludge and zero-valent iron (ZVI) system. When ZVI was added into an aquatic system with anaerobic granular sludge (AnGrSl) under anaerobic abiotic conditions, H was generated. Then, the H and CO were converted by the hydrogenotrophic methanogens to CH.

Nonideality-Aware Training for Accurate and Robust Low-Power Memristive Neural Networks.

Recent years have seen a rapid rise of artificial neural networks being employed in a number of cognitive tasks. The ever-increasing computing requirements of these structures have contributed to a desire for novel technologies and paradigms, including memristor-based hardware accelerators. Solutions based on memristive crossbars and analog data processing promise to improve the overall energy efficiency.

Ultrasonic Attenuation of an Agar, Silicon Dioxide, and Evaporated Milk Gel Phantom.

Background: It has been demonstrated that agar-based gel phantoms can emulate the acoustic parameters of real tissues and are the most commonly used tissue-mimicking materials for high-intensity focused ultrasound applications. The following study presents ultrasonic attenuation measurements of agar-based phantoms with different concentrations of additives (percent of agar, silicon dioxide and evaporated milk) in an effort of matching the material's acoustic property as close as possible to human tissues.

Methods: Nine different agar-based phantoms with various amounts of agar, silicon dioxide, and evaporated milk were prepared.

Acoustical properties of 3D printed thermoplastics.

With focused ultrasound (FUS) gaining popularity as a therapeutic modality for brain diseases, the need for skull phantoms that are suitable for evaluating FUS protocols is increasing. In the current study, the acoustical properties of several three-dimensional (3D) printed thermoplastic samples were evaluated to assess their suitability to mimic human skull and bone accurately. Samples were 3D printed using eight commercially available thermoplastic materials.

Characterization of a soft tissue-mimicking agar/wood powder material for MRgFUS applications.

This study describes the development and characterization of an agar-based soft tissue-mimicking material (TMM) doped with wood powder destined for fabricating MRgFUS applications. The main objective of the following work was to investigate the suitability of wood powder as an inexpensive alternative in replacing other added materials that have been suggested in previous studies for controlling the ultrasonic properties of TMMs. The characterization procedure involved a series of experiments designed to estimate the acoustic (attenuation coefficient, absorption coefficient, propagation speed, and impedance), thermal (conductivity, diffusivity, specific heat capacity), and MR properties (T and T relaxation times) of the wood-powder doped material.

Boron Nitride Nanotubes Versus Carbon Nanotubes: A Thermal Stability and Oxidation Behavior Study.

Nanotubes made of boron nitride (BN) and carbon have attracted considerable attention within the literature due to their unique mechanical, electrical and thermal properties. In this work, BN and carbon nanotubes, exhibiting high purity (>99%) and similar surface areas (~200 m/g), were systematically investigated for their thermal stability and oxidation behavior by combining thermal gravimetric analysis and differential scanning calorimetry methods at temperatures of up to ~1300 °C under a synthetic air flow environment. The BN nanotubes showed a good resistance to oxidation up to ~900 °C and fully transformed to boron oxide up to ~1100 °C, while the carbon nanotubes were stable up to ~450 °C and almost completely combusted up to ~800 °C.

Synthesis and Characterization of Hydrogenated Diamond-Like Carbon (HDLC) Nanocomposite Films with Metal (Ag, Cu) Nanoparticles.

In this work, the synthesis and characterization of hydrogenated diamond-like carbon (HDLC) nanocomposite thin films with embedded metallic Ag and Cu nanoparticles (NPs) are studied. These nanocomposite films were deposited using a hybrid technique with independent control over the carbon and metal sources. The metallic nanoparticles were directly deposited from the gas phase, avoiding surface diffusion of metal species on the deposition surface.

Rethinking arithmetic for deep neural networks.

We consider efficiency in the implementation of deep neural networks. Hardware accelerators are gaining interest as machine learning becomes one of the drivers of high-performance computing. In these accelerators, the directed graph describing a neural network can be implemented as a directed graph describing a Boolean circuit.

Nanotribological response of a-C:H coated metallic biomaterials: the cases of stainless steel, titanium, and niobium.

Background Wear and corrosion have been identified as two of the major forms of medical implant failures. This study aims to improve the surface, protective and tribological characteristics of bare metals used for medical implants, so as to improve scratch resistance and increase lifetime. Methods Hydrogenated amorphous carbon (a-C:H) films were deposited, using plasma enhanced chemical vapor deposition (PECVD), on stainless steel (SS), titanium (Ti) and niobium (Nb) metal plates.

Metal (Ag/Ti)-Containing Hydrogenated Amorphous Carbon Nanocomposite Films with Enhanced Nanoscratch Resistance: Hybrid PECVD/PVD System and Microstructural Characteristics.

This study aimed to develop hydrogenated amorphous carbon thin films with embedded metallic nanoparticles (a-C:H:Me) of controlled size and concentration. Towards this end, a novel hybrid deposition system is presented that uses a combination of Plasma Enhanced Chemical Vapor Deposition (PECVD) and Physical Vapor Deposition (PVD) technologies. The a-C:H matrix was deposited through the acceleration of carbon ions generated through a radio-frequency (RF) plasma source by cracking methane, whereas metallic nanoparticles were generated and deposited using terminated gas condensation (TGC) technology.

Multi-scale mechanical investigation of stainless steel and cobalt-chromium stents.

In-stent restenosis (ISR) remains a significant limitation despite the considerable previous clinical and investigative emphasis on the problem. Complications arising from the interaction of stent materials with the surrounding vessel wall as well as from the mechanical forces developing after implantation, play an important role in the development of ISR. To investigate the relation between mechanical factors and stent structural integrity, and to identify any structural weakness points on the geometry of commercially available Stainless Steel and Cobalt-Chromium stents, accelerated pulsatile durability tests were carried out in a simulated physiological environment.

Randomised clinical trial to compare total contact casts, healing sandals and a shear-reducing removable boot to heal diabetic foot ulcers.

The objective of this study was to evaluate the efficacy of three off-loading techniques to heal diabetic foot wounds: total contact casts (TCCs), healing sandals (HSs) and a removable boot with a shear-reducing foot bed (SRB). This was a 12-week, single-blinded randomised clinical trial with three parallel treatment groups of adults with diabetes and a foot ulcer (n = 73). Ulcer healing was defined as full reepithelialisation with no drainage.

Shear-reducing insoles to prevent foot ulceration in high-risk diabetic patients.

Purpose: To enhance the learner's competence with knowledge of the effectiveness of shear-reducing insoles for prevention of foot ulceration in patients with high-risk diabetes.

Target Audience: This continuing education activity is intended for physicians and nurses with an interest in skin and wound care.

Objectives: After participating in this educational activity, the participant should be better able to:1.

Probing mechanical properties of fully hydrated gels and biological tissues.

A longstanding challenge in accurate mechanical characterization of engineered and biological tissues is maintenance of both stable sample hydration and high instrument signal resolution. Here, we describe the modification of an instrumented indenter to accommodate nanomechanical characterization of biological and synthetic tissues in liquid media, and demonstrate accurate acquisition of force-displacement data that can be used to extract viscoelastoplastic properties of hydrated gels and tissues. We demonstrate the validity of this approach via elastoplastic analysis of relatively stiff, water-insensitive materials of elastic moduli E>1000 kPa (borosilicate glass and polypropylene), and then consider the viscoelastic response and representative mechanical properties of compliant, synthetic polymer hydrogels (polyacrylamide-based hydrogels of varying mol%-bis crosslinker) and biological tissues (porcine skin and liver) of E<500 kPa.

Computation of light scattering by axisymmetric nonspherical particles and comparison with experimental results.

A laboratory prototype of a novel experimental apparatus for the analysis of spherical and axisymmetric nonspherical particles in liquid suspensions has been developed. This apparatus determines shape, volume, and refractive index, and this is the main difference of this apparatus from commercially available particle analyzers. Characterization is based on the scattering of a monochromatic laser beam by particles [which can be inorganic, organic, or biological (such as red blood cells and bacteria)] and on the strong relation between the light-scattering pattern and the morphology and the volume, shape, and refractive index of the particles.

Preventing diabetic foot ulcer recurrence in high-risk patients: use of temperature monitoring as a self-assessment tool.

Objective: The purpose of this study was to evaluate the effectiveness of a temperature monitoring instrument to reduce the incidence of foot ulcers in individuals with diabetes who have a high risk for lower extremity complications.

Research Design And Methods: In this physician-blinded, randomized, 15-month, multicenter trial, 173 subjects with a previous history of diabetic foot ulceration were assigned to standard therapy, structured foot examination, or enhanced therapy groups. Each group received therapeutic footwear, diabetic foot education, and regular foot care.

Wear and biomechanical characteristics of a novel shear-reducing insole with implications for high-risk persons with diabetes.

Objective: This study was designed to measure pressure and shear reduction of a novel insole design.

Methods: We compared three multilayer viscoelastic insoles to a novel insole design (Glide-Soft, Xilas Medical, Inc., San Antonio, TX).

Home monitoring of foot skin temperatures to prevent ulceration.

Objective: To evaluate the effectiveness of at-home infrared temperature monitoring as a preventative tool in individuals at high risk for diabetes-related lower-extremity ulceration and amputation.

Research Design And Methods: Eighty-five patients who fit diabetic foot risk category 2 or 3 (neuropathy and foot deformity or previous history of ulceration or partial foot amputation) were randomized into a standard therapy group (n = 41) or an enhanced therapy group (n = 44). Standard therapy consisted of therapeutic footwear, diabetic foot education, and regular foot evaluation by a podiatrist.

Small infarctions of cochlear, retinal and encephalic tissue (SICRET syndrome).

Purpose: To report 3 new cases suggestive of SICRET syndrome.

Methods: Case reports. Three patients underwent clinical, laboratory and neuroradiological examination for recurrent retinal branch artery occlusions, encephalopathy and/or hearing loss.

[Relation between retinal pigment epithelial detachment and dye leakage in central serous retinopathy].

Purpose: The purpose of this report is to provide supportive evidence favoring the hypothesis of choroidal hyperpermeability in central serous chorioretinopathy.

Patients And Methods: Seven consecutive patients (eight eyes) with a history of central serous chorioretinopathy were explored. Fluorescein angiography and a monochromatic frame at 640 mm was performed for all eyes.

Survival after malignant tumors of the orbit and periorbit treated by exenteration.

Purpose: In order to further assess the survival value of orbital exenteration in malignant orbital and periorbital tumors.

Methods: The charts of 44 patients exenterated for a neoplasm of the orbit or periorbit were reviewed in a retrospective study.

Results: The overall 4-year survival was 45%.