Impact of effluent organic matter on perfluoroalkyl acid removal from wastewater effluent by granular activated carbon and alternative adsorbents.

Occurrence of perfluoroalkyl acids (PFAAs) in wastewater effluent coupled with increasingly stringent regulations has increased the need for more effective sorption-based PFAA treatment approaches. This study investigated the impact of ozone (O)- biologically active filtration (BAF) as integral components of non-reverse osmosis (RO)-based potable reuse treatment trains and as a potential pretreatment option to improve adsorptive PFAA removal from wastewater effluent by nonselective (e.g.

PFAS adsorbent selection: The role of adsorbent use rate, water quality, and cost.

Per- and polyfluoroalkyl substance (PFAS) contamination in aqueous matrices has intensified the search for PFAS adsorbents with elevated capacity, selectivity, and cost effectiveness. A novel surface modified organoclay (SMC) adsorbent was evaluated for PFAS removal performance in parallel with granular activated carbon (GAC) and ion exchange resin (IX) for the treatment of five distinct PFAS impaired waters including groundwater, landfill leachate, membrane concentrate and wastewater effluent. Rapid small scale column tests (RSSCTs) and breakthrough modeling were coupled to provide insight on adsorbent performance and cost for multiple PFAS and water types.

Pilot-scale field demonstration of a hybrid nanofiltration and UV-sulfite treatment train for groundwater contaminated by per- and polyfluoroalkyl substances (PFASs).

Previous laboratory scale studies indicate nanofiltration (NF) and UV-sulfite photochemical treatments as promising technologies for the removal and destruction, respectively, of per- and polyfluoroalkyl substances (PFASs) from contaminated water. This study reports on a field demonstration of a pilot-scale hybrid NF and UV-sulfite treatment train for the remediation of 12 PFASs detected in groundwater impacted by aqueous film-forming foam (AFFF) at a U.S.

Removal of per- and polyfluoroalkyl substances using super-fine powder activated carbon and ceramic membrane filtration.

Contamination of drinking water sources with per- and polyfluoroalkyl substances (PFASs) is a major challenge for environmental engineers. While granular activated carbon (GAC) is an effective adsorbent-based treatment technology for long-chained PFASs, GAC is less effective for removal of short-chained compounds, necessitating a more complete treatment strategy. Super-fine powder activated carbon (SPAC; particle diameter <1 um) is potentially a superior adsorbent to GAC due to high specific surface area and faster adsorption kinetics.