Photoluminescence of Argan-Waste-Derived Carbon Nanodots Embedded in Polymer Matrices.

In this work, photoluminescent (PL) carbon nano dots (CNDs) prepared from argan waste were embedded in highly optical transparent poly(styrene-co-acrylonitrile) (PSA) and cyclo-olefin copolymer (COC) matrices, which were further processed into thin films. In the first step, the luminescent CNDs were prepared through thermal processing of fine-groundargan waste, followed, in the second step, by direct dispersion in the polymer solutions, obtained by solving PSA and COC in selected solvents. These two polymer matrices were selected due to their high optical transparency, resilience to various environmental factors, and ability to be processed as quality thin films.

How Reproducible are Surface Areas Calculated from the BET Equation?

Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer-Emmett-Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials.

Fabrication of a biocathode for formic acid production upon the immobilization of formate dehydrogenase from Candida boidinii on a nanoporous carbon.

The immobilization of the non-metallic enzyme formate dehydrogenase from Candida boidinii (CbFDH) into a nanoporous carbon with appropriate pore structure was explored for the bioelectrochemical conversion of CO to formic acid (FA). Higher FA production rates were obtained upon immobilization of CbFDH compared to the performance of the enzyme in solution, despite the lower nominal CbFDH to NADH (β-nicotinamide adenine dinucleotide reduced) cofactor ratio and the lower amount of enzyme immobilized. The co-immobilization of the enzyme and a rhodium complex as mediator in the nanoporous carbon allowed the electrochemical regeneration of the cofactor.

Effect of confinement of horse heart cytochrome c and formate dehydrogenase from Candida boidinii on mesoporous carbons on their catalytic activity.

This study reports the immobilization of two biocatalysts (e.g., cytochrome c-Cyt c-and the non-metalloenzyme formate dehydrogenase from Candida boidinii-cbFDH) on a series of mesoporous carbons with controlled pore sizes.

Porous Organic Polymers Containing Active Metal Centers for Suzuki-Miyaura Heterocoupling Reactions.

A new generation of confined palladium(II) catalysts covalently attached inside of porous organic polymers (POPs) has been attained. The synthetic approach employed was straightforward, and there was no prerequisite for making any modification of the precursor polymer. First, POP-based catalytic supports were obtained by reacting one symmetric trifunctional aromatic monomer (1,3,5-triphenylbenzene) with two ketones having electron-withdrawing groups (4,5-diazafluoren-9-one, DAFO, and isatin) in superacidic media.

Photochemical and electrochemical reduction of graphene oxide thin films: tuning the nature of surface defects.

Individual and combined photo(electro)chemical reduction treatments of graphene oxide thin films have been performed to modulate the type of defects introduced into the graphene sheets during the reduction. These were characterized by X-ray photoelectron and Raman spectroscopies, nuclear reaction analysis and electrochemical methods. Illumination of the graphene oxide thin film electrodes with low irradiance simulated solar light provoked the photoassisted reduction of the material with negligible photothermal effects.

Carbon-Based Sorbent Coatings for the Determination of Pharmaceutical Compounds by Bar Adsorptive Microextraction.

Thirteen carbon materials comprising commercial activated carbons and lab-made materials (activated carbons, hydrochars, and low-T and high-T activated hydrochars) were assayed as sorbent coatings in bar adsorptive microextration (BAμE) to monitor trace levels of ten common pharmaceutical compounds (PhCs) in environmental water matrices including surface water, seawater, tap water, and wastewater. Polar and nonpolar pharmaceuticals were selected, sulfamethoxazole, triclosan, carbamazepine, diclofenac, mefenamic acid, 17-α-ethinylestradiol, 17-β-estradiol, estrone, gemfibrozil, and clofibric acid, as model compounds to cover distinct therapeutic classes. Despite having a less-developed porosity, data showed that "in-house" prepared low-T activated hydrochars, obtained from carbohydrates and an eutectic salt mixture at low temperature (i.

Carbon Black as Conductive Additive and Structural Director of Porous Carbon Gels.

This work investigates the impact of carbon black (CB) as a porogenic agent and conductive additive in the preparation of electrically conductive nanoporous carbon gels. For this, a series of materials were prepared by the polycondensation of resorcinol/formaldehyde mixtures in the presence of increasing amounts of carbon black. The conductivity of the carbon gel/CB composites increased considerably with the amount of CB, indicating a good dispersion of the additive within the carbon matrix.

Molecular Sieves for the Separation of Hydrogen Isotopes.

Stable molecular hydrogen isotopes, D and T, are both scarce and essential in several energy, industrial, and large-scale fundamental research applications. Due to the chemical similarity of these isotopes, their extraction and purification from hydrogen has relied for decades on expensive and energy-demanding processes. However, factoring in the phenomenon of quantum sieving could provide a new route for these separations.

Photochemical Degradation of Cyanides and Thiocyanates from an Industrial Wastewater.

We have explored the simultaneous degradation of cyanides and thiocyanate present in wastewaters from a cokemaking factory using photoassisted methods under varied illumination conditions (from simulated solar light to UV light). Overall, the photochemical degradation of cyanides was more efficient than that of thiocyanates, regardless of the illumination conditions, the effect being more pronounced in the absence of a photocatalyst. This is due to their different degradation mechanism that in the case of thiocyanates is dominated by fast recombination reactions and/or charge transfer reactions to electron scavengers.

Tailoring the textural properties of an activated carbon for enhancing its adsorption capacity towards diclofenac from aqueous solution.

A series of activated carbons (ACs) were prepared by modifying a commercial AC by physical activation using CO during different activation times. The ACs were designated as F, F12, F24, and F40 corresponding to the activation times of 0, 12, 24, and 40 h, respectively. The surface area, total pore volume, micropore volume, and mean micropore width were determined for all the ACs.

Chemically activated high grade nanoporous carbons from low density renewable biomass (Agave sisalana) for the removal of pharmaceuticals.

Hypothesis: Enlarging the range of viable nanoporous carbon precursors, namely by the acid treatment of low density biomass residues, can overcome issues related with the availability and quality of raw materials that have potential impact on cost and quality grade of the final product.

Experiments: Nanoporous carbons were prepared following a two-step process: HSO digestion/polycondensation of biomass waste (Agave sisalana, sisal) at temperature below 100 °C and atmospheric pressure to obtain acid-chars that were further chemically activated with KOH or KCO. Selected synthesized nanoporous carbons were tested for the removal of pharmaceutical compounds - ibuprofen and iopamidol - in aqueous solutions.

Assessing the Potential of Biochars Prepared by Steam-Assisted Slow Pyrolysis for CO Adsorption and Separation.

The potentialities in the use of biochars prepared by steam-assisted slow pyrolysis as adsorbents of gases of strategic interest (N, CO, and CH) and their mixtures were explored. The biochars prepared from wood and cellulose fibers exhibited a narrow microporosity, with average pore sizes ranging between 0.55 and 0.

Origin and Perspectives of the Photochemical Activity of Nanoporous Carbons.

Even though, owing to the complexity of nanoporous carbons' structure and chemistry, the origin of their photoactivity is not yet fully understood, the recent works addressed here clearly show the ability of these materials to absorb light and convert the photogenerated charge carriers into chemical reactions. In many aspects, nanoporous carbons are similar to graphene; their pores are built of distorted graphene layers and defects that arise from their amorphicity and reactivity. As in graphene, the photoactivity of nanoporous carbons is linked to their semiconducting, optical, and electronic properties, defined by the composition and structural defects in the distorted graphene layers that facilitate the exciton splitting and charge separation, minimizing surface recombination.

Photochemical reactivity of apical oxygen in KSr(2)Nb(5)O(15) materials for environmental remediation under UV irradiation.

The photocatalytic activity of a series of novel KSrNbO materials was studied using the photooxidation of methylene blue as model reaction. The influence of the calcination time upon the crystalline structure and photoactivity was verified. Characterization was performed by XRD, SEM, FTIR, UV-Vis/DR, Helium picnometry, and N and CO adsorption-desorption isotherms.

The ability of a fibrous titanium oxophosphate for nitrogen-adsorption above room temperature.

TiO(PO)·2HO (1), a three-dimensional titanium oxophosphate, thermally transforms to TiO(PO) (2), a fibrous novel compound. The crystal structure of 2 was solved ab initio using powder X-ray diffraction data (triclinic, P1[combining macron], a = 5.0843(1) Å, b = 8.

Designing micro- and mesoporous carbon networks by chemical activation of organic resins.

Carbon xerogels with ultrahigh micro- and mesopore volumes were synthesized from the activation of polymeric resins prepared by sol-gel polycondensation of resorcinol/formaldehyde mixtures in basic medium and subcritical drying. Various activating conditions (e.g.

Photochemistry of nanoporous carbons: Perspectives in energy conversion and environmental remediation.

The interest in the use of nanoporous carbon materials in applications related to energy conversion and storage, either as catalysts or additives, has grown over recent decades in various disciplines. Since the early studies reporting the benefits of the use of nanoporous carbons as inert supports of semiconductors and as electron acceptors that enhance the splitting of the photogenerated excitons, many researchers have investigated the key role of carbon matrices coupled to all types of photoactive materials. More recently, our group has demonstrated the ability of semiconductor-free nanoporous carbons to convert the absorbed photons into chemical reactions (i.

Surface Modification of a Nanoporous Carbon Photoanode upon Irradiation.

The photocorrosion of a nanoporous carbon photoanode, with low surface functionalization and high performance towards the photoelectrochemical oxidation of water using simulated solar light, was investigated. Two different light configurations were used to isolate the effect of the irradiation wavelength (UV and visible light) on the textural and chemical features of the carbon photoanode, and its long-term photocatalytic performance for the oxygen evolution reaction. A complete characterization of the carbon showed that the photocorrosion of carbon anodes of low functionalization follows a different pathway than highly functionalized carbons.

Role of crystal size on swing-effect and adsorption induced structure transition of ZIF-8.

The flexibility and structure transition behaviour of ZIF-8 in a series of samples with different particle size has been studied using a combination of high-resolution N2 gas adsorption isotherms and, for the first time, a broad in situ PXRD and Rietveld analysis. During the stepped adsorption process, large particles showed a narrow adsorption/desorption pressure range with a shorter equilibrium time due to lower kinetic hindrance, deriving from higher amount of active sites. In situ PXRD showed that both the rotation of imidazole ring and a bend in the methyl group led to the gate opening of ZIF-8.

Moisture insensitive adsorption of ammonia on resorcinol-formaldehyde resins.

Phenolic-formaldehyde resins aged at 85, 90 and 95°C were used as ammonia adsorbents at dynamic conditions in dry and moist air. To avoid pressure drops 10% bentonite was added as a binder. The initial and hybrid materials (before and after ammonia adsorption) were extensively characterized from the point of view of their porosity and surface chemistry.

A rapid microwave-assisted synthesis of a sodium-cadmium metal-organic framework having improved performance as a CO2 adsorbent for CCS.

We report on a facile and rapid microwave-assisted method for preparing a sodium-cadmium metal-organic framework (having coordinatively unsaturated sodium ions) that considerably shortens the conventional synthesis time from 5 days to 1 hour. The obtained (Na,Cd)-MOF showed an excellent volumetric CO2 adsorption capacity (5.2 mmol cm(-3) at 298 K and 1 bar) and better CO2 adsorption properties than those shown by the same metal-organic framework when synthesized following a more conventional procedure.

Competitive adsorption of ibuprofen and amoxicillin mixtures from aqueous solution on activated carbons.

This work investigates the competitive adsorption under dynamic and equilibrium conditions of ibuprofen (IBU) and amoxicillin (AMX), two widely consumed pharmaceuticals, on nanoporous carbons of different characteristics. Batch adsorption experiments of pure components in water and their binary mixtures were carried out to measure both adsorption equilibrium and kinetics, and dynamic tests were performed to validate the simultaneous removal of the mixtures in breakthrough experiments. The equilibrium adsorption capacities evaluated from pure component solutions were higher than those measured in dynamic conditions, and were found to depend on the porous features of the adsorbent and the nature of the specific/dispersive interactions that are controlled by the solution pH, density of surface change on the carbon and ionization of the pollutant.