Polycyclic aromatic hydrocarbons (PAHs) in black crusts on stone monuments in Milan: detection, quantification, distributions, and source assessment.

In the field of conservation of cultural heritage, one must always consider the environmental conditions in which the works of art are located and the level of atmospheric pollution to which they are exposed, especially in the case of monuments stored outdoors. The present study is focused on the detection and the quantification of polycyclic aromatic hydrocarbons (PAHs) in black crust samples from the Monumental Cemetery of Milan (Italy), and the assessment of their sources through the analysis of the distributions of the different compounds in the samples, together with the use of diagnostic ratios. Six black crust samples taken from funerary monuments were analyzed.

A multi-analytical approach for the identification of pollutant sources on black crust samples: Stable isotope ratio of carbon, sulphur, and oxygen.

This study is focused on the identification of pollutant sources on black crust (BC) samples from the Monumental Cemetery of Milan (Italy), through a multi-analytical approach based on the determination of stable isotope ratios of carbon, sulphur, and oxygen. Six black crust samples, mainly developed on marble sculptures over a time span of 100-150 years, were analysed. For the first time, δC was measured for BC samples: δC values of the pulverized samples (from -1.

Determination of Saffron Quality through a Multi-Analytical Approach.

Currently, the specifications for the assessment of saffron quality are contained in the ISO 3632 technical standard. This norm evaluates saffron quality through a UV-Vis spectrophotometric method and grades the spice into three commercial categories. However, numerous studies have highlighted several weaknesses and limitations of the ISO method.

Preliminary Air Quality and Microclimatic Conditions Study in the in Saronno (VA).

In the present work, the microclimatic conditions (temperature (T), relative humidity (RH), and illuminance (I)), together with the air quality (both aerosol particulate matter (PM) and gaseous pollutants), were monitored to evaluate the environmental conditions inside the in Saronno (VA), a masterpiece of the Italian Renaissance. For this purpose, dataloggers were used to carry out the T, RH, and I measurements, whereas an optical particle counter (OPC) was employed to perform the particle count and determine the concentration of the aerosol PM. Finally, diffusive passive samplers were used to determine the concentration of nitrogen dioxide (NO) and BTEX (benzene, toluene, ethylbenzene, and xylenes).

Study of a surface coating present on a Renaissance Piety from the Museum of Ancient Art (Castello Sforzesco, Milan).

The surface coating present on a marble Piety dating to the Renaissance period and stored at the Castello Sforzesco-Museum of Ancient Art (Milan, Italy) was studied and chemically characterised. For this purpose, both portable non-invasive (XRF and colorimetric measurements) and micro-invasive techniques (FTIR-ATR and SEM-EDS), have been applied. The statue has been recently submitted to a restoration, since its surface appeared dark and yellowed, before an exhibition at the Louvre Museum and the original appearance of the marble surface recovered thanks to the surface coating removal.

Multitechnique diagnostic analysis and 3D surveying prior to the restoration of St. Michael defeating Evil painting by Mattia Preti.

In this study, a multimethodological analysis involving optical and physical/chemical diagnostic techniques and 3D photogrammetric survey was successfully applied, for the first time, on the large oil on canvas St. Michael defeating Evil painting by Mattia Preti, located inside the Church of the Immaculate Conception of Sarria (Floriana) in Malta. Pigmenting agents, binder media, and raw materials were first characterized, both at elemental and molecular scales, through X-ray fluorescence spectroscopy (XRF), optical stereo microscopy (SM), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared spectroscopy (FT-IR), and gas chromatography coupled with mass spectrometry (GC-MS).

Calcitic-based stones protection by a low-fluorine modified methacrylic coating.

Atmospheric pollutants, such as NO, SO, and particulate matter, together with water percolation inside the stone pores, represent the main causes of cultural heritage decay. In order to avoid these undesired phenomena, the application of protective coatings represents a reliable solution. In this context, the present study focused on the synthesis of low-fluorine content methacrylic-based (MMA) polymeric resins characterized by seven F atoms (namely F7 monomer) in the lateral chains.

Characterization of black crusts developed on historic stones with diverse mineralogy under different air quality environments.

Black crusts (BCs) are one of the most critical alteration forms found on stones belonging to architectural heritage. Since they could be considered as passive samplers of atmospheric pollution, it would be plausible to establish relations between the air contamination and the BCs. With this aim, we have characterized BCs collected on historic buildings from two Spanish cities (Granada and Vigo) with different polluted atmospheres, as well as formed on stone substrates of varied mineralogy and texture.

The combined use of SEM-EDX, Raman, ATR-FTIR and visible reflectance techniques for the characterisation of Roman wall painting pigments from Monte d'Oro area (Rome): an insight into red, yellow and pink shades.

The aim of this work has been the identification of the painter's materials employed in the wall decoration of some destroyed buildings dating approximately between the first century B.C. and the first century A.

The impact of atmospheric pollution on outdoor cultural heritage: an analytic methodology for the characterization of the carbonaceous fraction in black crusts present on stone surfaces.

COVID-19 has reduced tourism in both museums and historical sites with negative economic effect. The wellbeing and good preservation of monuments is a key factor to encourage again tourism. Historical monuments exposed to outdoor pollution are subjected to well known degradation phenomenon including the formation on their surface of black crusts (BCs) causing blackening and deterioration of the monuments and, as a consequence, a worst fruition by the visitors.

Improving indoor air quality through an air purifier able to reduce aerosol particulate matter (PM) and volatile organic compounds (VOCs): Experimental results.

The adverse effects of fine particulate matter (PM) and many volatile organic compounds (VOCs) on human health are well known. Fine particles are, in fact, those most capable of penetrating in depth into the respiratory system. People spend most of their time indoors where concentrations of some pollutants are sometimes higher than outdoors.

Elemental Analysis and Phenolic Profiles of Selected Italian Wines.

The study of the chemical composition of wines is nowadays a topic of great interest because of the importance of this market, especially in Italy, and also considering the numerous cases of falsification of famous and very expensive wines. The present paper focused on the analysis of metals and polyphenols in Italian wines belonging to different provenance and types. At this purpose 20 elements were quantified by inductively coupled plasma optical emission spectrometry (ICP-OES) and ICP mass spectrometry (ICP-MS).

Quantification of the Aluminum Content Leached into Foods Baked Using Aluminum Foil.

In this study, determinations of the aluminum content in meat and fish performed after having cooked these foods using commercially available aluminum foil have been performed. The release of this chemical element was evaluated by cooking beef, chicken, and fish wrapped with commercial aluminum foil using seasoning or without seasoning in order to evaluate the effect on Al leaching into the food. The characterization of the food samples was carried out using two different analytical methods: inductively coupled plasma optical emission spectrometry (ICP-OES), for the quantification of aluminum, and scanning electron microscopy coupled with energy dispersion spectroscopy (SEM-EDS) to evaluate any structural changes occurring inside the aluminum foil after the cooking procedure.

The environmental impact of air pollution on the built heritage of historic Cairo (Egypt).

In the last decades, many researchers investigated the relation between environmental pollution and the degradation phenomena on the built heritage, because of their rapid increase and growing harmfulness. Consequently, the identification of the main pollution sources has become essential to define mitigation actions against degradation and alteration phenomena of the stone materials. In this way, the present paper is focused on the study of the effect of air pollution on archaeological buildings in Historic Cairo.

A multi-analytical approach to study the chemical composition of total suspended particulate matter (TSP) to assess the impact on urban monumental heritage in Florence.

In the present paper total suspended particulate matter (TSP) was collected at the S. Marco Museum in Florence during seasonal monitoring campaigns carried out in 2013 and 2014. The analyses focused on the determination of TSP chemical composition: main ions, organic carbon (OC), elemental carbon (EC), water soluble organic compounds (WSOC) and levoglucosa which is considered the specific marker for wood burning.

Efficiency of an Air Cleaner Device in Reducing Aerosol Particulate Matter (PM) in Indoor Environments.

Indoor air quality (IAQ) in household environments is mandatory since people spend most of their time in indoor environments. In order to guarantee a healthy environment, air purification devices are often employed. In the present work, a commercial household vacuum cleaner has been tested in order to verify its efficiency in reducing the mass concentration and particle number of aerosol particulate matter (PM).

Towards Novel Fluorinated Methacrylic Coatings for Cultural Heritage: A Combined Polymers and Surfaces Chemistry Study.

In this work, new co- and ter-polymers of methyl methacrylate (MMA), ethyl methacrylate (EMA), and -butyl methacrylate (nBuMA), containing just 1% mol × mol of a fluorinated co-monomer, 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl methacrylate (POMA), were synthesized. After an UV accelerated aging test, the photo-chemical stability of the polymers prepared was determined by H NMR and FT-IR spectroscopy, size exclusion chromatography, differential scanning calorimetry and wettability measurements. The polymers were applied to Botticino tiles to achieve better performances in terms of water repellency and consequently deterioration resistance.

Composition and origin of PM in Mediterranean Countryside.

In this work PM was collected during winter and summer in a Sardinian village (Gonnostramatza, Italy) highly affected by biomass burning emissions. A multi-technique approach was adopted for the complete PM chemical characterization. The bulk characterization was performed by IC (Ion Chromatography), HPAEC (High-Performance Anion-Exchange Chromatography), TOT (Thermal Optical Transmittance) and ED-XRF (Energy-Dispersive X-Ray Fluorescence) while XPS (X-ray Photoelectron Spectroscopy) was used for the surface characterization.

Outdoor spatial distribution and indoor levels of NO and SO in a high environmental risk site of the South Italy.

In the frame of the project EDOC@WORK3.0, Education and Work on Cloud, a monitoring plan has been carried out in the highly industrialized town of Taranto (one of the most polluted sites of Italy) in order to investigate contemporary indoor and outdoor concentrations of NO and SO by passive sampling devises (Radiello). Simultaneously indoor and outdoor samplings of NO and SO were performed from 2nd November 2015 to 2nd December 2015 in nine sites scattered in the investigated area at different quotes and distances from the industrial complex.

The Oceanus statue of the Fontana di Trevi (Rome): The analysis of black crust as a tool to investigate the urban air pollution and its impact on the stone degradation.

This paper deals with the analysis of black crust coming from the statue of Oceanus belonging to the Fontana di Trevi (Rome). This monument is undoubtedly one of the main touristic attractions of Rome. During the restoration held between 2014 and 2015, some diagnostic analyses had been carried out.

Surface and volume non-invasive methods for the structural monitoring of the bass-relief 'Madonna con Bambino' (Gorizia, Northern Italy).

Structural analysis of marble statues, carried out by non-invasive and in situ methods, is crucial to define the state of conservation of the artworks and to identify the deterioration phenomena that can affect them. In this work, we combined in situ non-destructive techniques, ultrasonic tomography (US), ultraviolet-induced visible fluorescence (UV-IF) and X-ray fluorescence (XRF) to study the bass-relief 'Madonna con Bambino' (Gorizia, Italy). The US revealed the presence of some metallic pivots, associated with areas of high sound velocity; moreover, a more degraded area has been identified in the lower part of the bass-relief.

Advanced mortar coatings for cultural heritage protection. Durability towards prolonged UV and outdoor exposure.

In the present work, two kinds of hybrid polymeric-inorganic coatings containing TiO or SiO particles and prepared starting from two commercial resins (Alpha®SI30 and Bluesil®BP9710) were developed and applied to two kinds of mortars (an air-hardening calcic lime mortar [ALM] and a natural hydraulic lime mortar [HLM]) to achieve better performances in terms of water repellence and consequently damage resistance. The two pure commercial resins were also applied for comparison purposes. Properties of the coated materials and their performance were studied using different techniques such as contact angle measurements, capillary absorption test, mercury intrusion porosimetry, surface free energy, colorimetric measurements and water vapour permeability tests.

Chemical characterization of biomass fuel particulate deposits and ashes in households of Mt. Everest region (NEPAL).

During a sampling campaign, carried out during June 2012, inside some traditional households located in four villages (Phakding, Namche, Pangboche and Tukla) of Mt. Everest region in southern part of the central Himalaya (Nepal), particulate matter (PM) depositions and ashes have been collected. Moreover, outdoor PM depositions have also been analyzed.

An analysis of the black crusts from the Seville Cathedral: a challenge to deepen the understanding of the relationships among microstructure, microchemical features and pollution sources.

The Cathedral of Seville is one of the most important buildings in the whole of southern Spain. It suffers, like most of the historical buildings located in urban environments, from several degradation phenomena related to the high pollution level. Undoubtedly, the formation of black crusts plays a crucial role in the decay of the stone materials belonging to the church.