Extreme Dewetting Resistance and Improved Visible Transmission of Ag Layers Using Sub-Nanometer Ti Capping Layers.

As technology development drives the thickness of thin film depositions down into the nano regime, understanding and controlling the dewetting of thin films has become essential for many applications. The dewetting of ultra-thin Ag (9 nm) films with Ti (0.5 nm) adhesion and capping layers on glass substrates was investigated in this work.

Monolayer Capping Provides Close to Optimal Resistance to Laser Dewetting of Au Films.

Next-generation heat-assisted magnetic recording (HAMR) relies on fast, localized heating of the magnetic medium during the write process. Au plasmonic near-field transducers are an attractive solution to this challenge, but increased thermal stability of Au films is required to improve long-term reliability. This work compares the effect of nanoscale Al, AlO, and Ta capping films on Au thin films with Ti or Ta adhesion layers for use in HAMR and other high-temperature plasmonic applications.

A Retrofittable Photoelectron Gun for Low-Voltage Imaging Applications in the Scanning Electron Microscope.

Low-voltage scanning electron microscopy is a powerful tool for examining surface features and imaging beam-sensitive materials. Improving resolution during low-voltage imaging is then an important area of development. Decreasing the effect of chromatic aberration is one solution to improving the resolution and can be achieved by reducing the energy spread of the electron source.

Templated Synthesis of SiO Nanotubes for Lithium-Ion Battery Applications: An In Situ (Scanning) Transmission Electron Microscopy Study.

One of the weaknesses of silicon-based batteries is the rapid deterioration of the charge-storage capacity with increasing cycle numbers. Pure silicon anodes tend to suffer from poor cycling ability due to the pulverization of the crystal structure after repeated charge and discharge cycles. In this work, we present the synthesis of a hollow nanostructured SiO material for lithium-ion anode applications to counter this drawback.

Nanoscale mapping of shifts in dark plasmon modes in sub 10 nm aluminum nanoantennas.

In this work, we report the fabrication and spectroscopic characterization of subwavelength aluminum nanocavities-consisting of hexamer or tetramer clusters of sub 10 nm width Al nanorods-with tunable localized surface plasmon resonance (LSPR) energies on suspended SiNmembranes. Here the volume plasmon (VP) and LSPR modes of lithographically-fabricated Al nanocavities are revealed by low-loss electron energy-loss spectroscopy (EELS) in an aberration corrected scanning transmission electron microscope (STEM). We show that the existence of grain boundaries (GBs) in these nanocavities results in shifts in the VP energy and a reduction in the VP lifetime.

Inhibition of vacuum sublimation artefacts for (Scanning) Transmission Electron Microscopy ((S)TEM) of sulphur samples encapsulation.

Lithium-sulfur battery is one of promising candidates for next-generation energy storage device due to the sulfur cathode material with low cost and nontoxicity, and super high theoretical energy density (nearly 2600Wh kg ) and specific energy (2567Wh kg ). Sulphur, however, poses a few interesting challenges before it can gain widespread utilisation. The biggest issue is known as the polysulphide shuttling effect which contributes to rapid capacity loss after cycling.

Charged Domain Wall and Polar Vortex Topologies in a Room-Temperature Magnetoelectric Multiferroic Thin Film.

Multiferroic topologies are an emerging solution for future low-power magnetic nanoelectronics due to their combined tuneable functionality and mobility. Here, we show that in addition to being magnetoelectric multiferroic at room temperature, thin-film Aurivillius phase BiTiFeMnO is an ideal material platform for both domain wall and vortex topology-based nanoelectronic devices. Utilizing atomic-resolution electron microscopy, we reveal the presence and structure of 180°-type charged head-to-head and tail-to-tail domain walls passing throughout the thin film.

Extending the Cyclability of Alkaline Zinc-Air Batteries: Synergistic Roles of Li and K Ions in Electrodics.

Tweaking the electrolyte of the anode compartment of zinc-air battery (ZAB) system is shown to be extending the charge-discharge cyclability of the cell. An alkaline zinc (Zn)-air cell working for ∼32 h (192 cycles) without failure is extended to >55 h (>330 cycles) by modifying the anode compartment with a mixture electrolyte of KOH and LiOH. The cell containing the mixture electrolyte has a low overpotential for charging along with high discharge capacity.

Covalently interconnected transition metal dichalcogenide networks via defect engineering for high-performance electronic devices.

Solution-processed semiconducting transition metal dichalcogenides are at the centre of an ever-increasing research effort in printed (opto)electronics. However, device performance is limited by structural defects resulting from the exfoliation process and poor inter-flake electronic connectivity. Here, we report a new molecular strategy to boost the electrical performance of transition metal dichalcogenide-based devices via the use of dithiolated conjugated molecules, to simultaneously heal sulfur vacancies in solution-processed transition metal disulfides and covalently bridge adjacent flakes, thereby promoting percolation pathways for the charge transport.

Large-Area Fabrication of Vertical Silicon Nanotube Arrays Toroidal Micelle Self-Assembly.

We present a highly scalable, room-temperature strategy for fabricating vertical silicon nanotube arrays derived from a toroidal micelle pattern a water vapor-induced block copolymer (BCP) self-assembly mechanism. A polystyrene--poly(ethylene oxide) (PS--PEO) BCP system can be self-assembled into toroidal micelle structures (diameter: 400-600 nm) on a PS-OH-modified substrate in a facile manner contrasting with other complex processes described in the literature. It was found that a minimum PS--PEO thickness of ∼86 nm is required for the toroidal self-assembly.

Development of a Practicable Digital Pulse Read-Out for Dark-Field STEM.

When characterizing beam-sensitive materials in the scanning transmission electron microscope (STEM), low-dose techniques are essential for the reliable observation of samples in their true state. A simple route to minimize both the total electron-dose and the dose-rate is to reduce the electron beam-current and/or raster the probe at higher speeds. At the limit of these settings, and with current detectors, the resulting images suffer from unacceptable artifacts, including signal-streaking, detector-afterglow, and poor signal-to-noise ratios (SNRs).

Bandgap determination from individual orthorhombic thin cesium lead bromide nanosheets by electron energy-loss spectroscopy.

Inorganic lead halide perovskites are promising candidates for optoelectronic applications, due to their high photoluminescence quantum yield and narrow emission line widths. Particularly attractive is the possibility to vary the bandgap as a function of the halide composition and the size or shape of the crystals at the nanoscale. Here we present an aberration-corrected scanning transmission electron microscopy (STEM) and monochromated electron energy-loss spectroscopy (EELS) study of extended nanosheets of CsPbBr3.

Comparison of Metal Adhesion Layers for Au Films in Thermoplasmonic Applications.

If thermoplasmonic applications such as heat-assisted magnetic recording are to be commercially viable, it is necessary to optimize both thermal stability and plasmonic performance of the devices involved. In this work, a variety of different adhesion layers were investigated for their ability to reduce dewetting of sputtered 50 nm Au films on SiO substrates. Traditional adhesion layer metals Ti and Cr were compared with alternative materials of Al, Ta, and W.

MoS Memtransistors Fabricated by Localized Helium Ion Beam Irradiation.

Two-dimensional (2D) layered semiconductors have recently emerged as attractive building blocks for next-generation low-power nonvolatile memories. However, challenges remain in the controllable fabrication of bipolar resistive switching circuit components from these materials. Here, the experimental realization of lateral memtransistors from monolayer single-crystal molybdenum disulfide (MoS) utilizing a focused helium ion beam is reported.

Less is More: Improved Thermal Stability and Plasmonic Response in Au Films via the Use of SubNanometer Ti Adhesion Layers.

The use of a metallic adhesion layer is known to increase the thermo-mechanical stability of Au thin films against solid-state dewetting, but in turn results in damping of the plasmonic response, reducing their utility in applications such as heat-assisted magnetic recording (HAMR). In this work, 50 nm Au films with Ti adhesion layers ranging in thickness from 0 to 5 nm were fabricated, and their thermal stability, electrical resistivity, and plasmonic response were measured. Subnanometer adhesion layers are demonstrated to significantly increase the stability of the thin films against dewetting at elevated temperatures (>200 °C), compared to more commonly used adhesion layer thicknesses that are in the range of 2-5 nm.

Oxide-mediated recovery of field-effect mobility in plasma-treated MoS.

Precise tunability of electronic properties of two-dimensional (2D) nanomaterials is a key goal of current research in this field of materials science. Chemical modification of layered transition metal dichalcogenides leads to the creation of heterostructures of low-dimensional variants of these materials. In particular, the effect of oxygen-containing plasma treatment on molybdenum disulfide (MoS) has long been thought to be detrimental to the electrical performance of the material.

Direct atomic scale determination of magnetic ion partition in a room temperature multiferroic material.

The five-layer Aurivillius phase BiTiFeMnO system is a rare example of a single-phase room temperature multiferroic material. To optimise its properties and exploit it for future memory storage applications, it is necessary to understand the origin of the room temperature magnetisation. In this work we use high resolution scanning transmission electron microscopy, EDX and EELS to discover how closely-packed Ti/Mn/Fe cations of similar atomic number are arranged, both within the perfect structure and within defect regions.

A Deep Look Into Erionite Fibres: an Electron Microscopy Investigation of their Self-Assembly.

The exposure of humans to erionite fibres of appropriate morphology and dimension has been unambiguously linked to the occurrence of Malignant Mesothelioma. For this reason, a detailed morpho-structural investigation through Electron Microscopy techniques has been performed on erionite samples collected at two different localities, Durkee (ED) and Rome (ER), Oregon, USA. The sample from Rome has been also investigated after a prolonged leaching with Gamble's solution (ER4G) in order to evaluate the possible occurrence of morpho-structural modifications induced by this Simulated-Lung-Fluid (SLF).

Heterojunction hybrid devices from vapor phase grown MoS2.

We investigate a vertically-stacked hybrid photodiode consisting of a thin n-type molybdenum disulfide (MoS2) layer transferred onto p-type silicon. The fabrication is scalable as the MoS2 is grown by a controlled and tunable vapor phase sulfurization process. The obtained large-scale p-n heterojunction diodes exhibit notable photoconductivity which can be tuned by modifying the thickness of the MoS2 layer.

Scalable production of large quantities of defect-free few-layer graphene by shear exfoliation in liquids.

To progress from the laboratory to commercial applications, it will be necessary to develop industrially scalable methods to produce large quantities of defect-free graphene. Here we show that high-shear mixing of graphite in suitable stabilizing liquids results in large-scale exfoliation to give dispersions of graphene nanosheets. X-ray photoelectron spectroscopy and Raman spectroscopy show the exfoliated flakes to be unoxidized and free of basal-plane defects.

Characterization of metal-wear nanoparticles in pseudotumor following metal-on-metal hip resurfacing.

Unlabelled: Biopsies from a typical case of pseudotumor following metal-on-metal hip resurfacing (MoMHR) were analyzed using light and transmission electron microscopy, backscatter scanning electron microscopy and energy dispersive x-ray spectrometry (EDS). Heavy macrophage infiltration was observed in all black pigmented specimens. Metal nanoparticles (NPs) were observed exclusively within phagosomes of living macrophages and fragments of dead macrophages.

Anthraquinone monosulfonate adsorbed on graphite shows two very different rates of electron transfer: surface heterogeneity due to basal and edge plane sites.

Graphitic electrodes find widespread use throughout electrochemistry; understanding their fundamental electrochemical properties is imperative. It is widely thought that graphite edge plane sites exhibit faster rates of electron transfer as compared to basal plane sites. Hitherto the different rates of electron transfer at the edge and basal sites have been inferred indirectly using diffusional systems.