Conventional sintering of nano-crystalline Yttria-Stabilized Zirconia enables high-strength, highly translucent and opalescent dental ceramics.

Development of restorative materials capable of mimicking optical and mechanical performance of natural teeth is a quest in aesthetic density. Yttria-Stabilized Zirconia (YSZ) ceramics represent one of the most popular choices for dental restorations, owing to their biocompatibility, white colour, and the possibility to use CAD-CAM technologies. In particular, YSZ doped with 3 mol.

Fly-Ash Evaluation as Potential EOL Material Replacement of Cement in Pastes: Morpho-Structural and Physico-Chemical Properties Assessment.

The main objective of the study was to produce alternative binder materials, obtained with low cost, low energy consumption, and low CO production, by regenerating end-of-life (EOL) materials from mineral deposits, to replace ordinary Portland cement (OPC). The materials analyzed were ash and slag from the Turceni thermal power plant deposit, Romania. These were initially examined for morphology, mineralogical composition, elemental composition, degree of crystallinity, and heating behavior, to determine their ability to be used as a potential source of supplementary cementitious materials (SCM) and to establish the activation and transformation temperature in the SCM.

Cadmium-Free and Efficient Type-II InP/ZnO/ZnS Quantum Dots and Their Application for LEDs.

It is a generally accepted perspective that type-II nanocrystal quantum dots (QDs) have low quantum yield due to the separation of the electron and hole wavefunctions. Recently, high quantum yield levels were reported for cadmium-based type-II QDs. Hence, the quest for finding non-toxic and efficient type-II QDs is continuing.

Quantum dot and electron acceptor nano-heterojunction for photo-induced capacitive charge-transfer.

Capacitive charge transfer at the electrode/electrolyte interface is a biocompatible mechanism for the stimulation of neurons. Although quantum dots showed their potential for photostimulation device architectures, dominant photoelectrochemical charge transfer combined with heavy-metal content in such architectures hinders their safe use. In this study, we demonstrate heavy-metal-free quantum dot-based nano-heterojunction devices that generate capacitive photoresponse.

End-of-Life Materials Used as Supplementary Cementitious Materials in the Concrete Industry.

A sustainable solution for the global construction industry can be partial substitution of Ordinary Portland Cement (OPC) by use of supplementary cementitious materials (SCMs) sourced from industrial end-of-life (EOL) products that contain calcareous, siliceous and aluminous materials. Candidate EOL materials include fly ash (FA), silica fume (SF), natural pozzolanic materials like sugarcane bagasse ash (SBA), palm oil fuel ash (POFA), rice husk ash (RHA), mine tailings, marble dust, construction and demolition debris (CDD). Studies have revealed these materials to be cementitious and/or pozzolanic in nature.

Formation of Nanocomposite Solid Oxide Fuel Cell Cathodes by Preferential Clustering of Cations from a Single Polymeric Precursor.

Conventional composite cathodes used in solid oxide fuel cells (SOFCs) are fabricated by co-sintering of electrocatalyst and ionic conductor powders at 1100-1250 °C. The relatively high-temperature heat treatments required to ensure bonding among the powders and between the powders and electrolyte results in the formation of resistive phases and coarse microstructures corresponding to short triple-phase boundary (TPB) length and, consequently, low oxygen reduction activity. In the present work, to achieve long TPBs and avoid resistive phase formation, we propose to fabricate nanocomposite LaSrMnO-CeSmO (LSM-SDC) and LaCaMnO-CeSmO (LCM-SDC) thin film cathodes by a low-temperature method, which involves the use of a single polymeric precursor solution containing all the respective cations.

Cross-linked enzyme lyophilisates (CLELs) of urease: A new method to immobilize ureases.

In this study, we presented a new approach for immobilizing JBU (Jack bean urease), by producing urease cross-linked enzyme lyophilisates (CLELs). Through the use of bovine serum albumin (BSA), lyophilisation, cross-linking with dextran polyaldehyde (DPA), and optimizing cross-linker pH, the urease-CLELs produced show an increase in relative catalytic activity that is 1.47 times higher than that of free urease, while remaining stable up to temperatures of 85 °C.

Aptamer and nanomaterial based FRET biosensors: a review on recent advances (2014-2019).

Fluorescence resonance energy transfer, one of the most powerful phenomena for elucidating molecular interactions, has been extensively utilized as a biosensing tool to provide accurate information at the nanoscale. Numerous aptamer- and nanomaterial-based FRET bioassays has been developed for detection of a large variety of molecules. Affinity probes are widely used in biosensors, in which aptamers have emerged as advantageous biorecognition elements, due to their chemical and structural stability.

Efficient White LEDs Using Liquid-state Magic-sized CdSe Quantum Dots.

Magic clusters have attracted significant interest to explore the dynamics of quantum dot (QD) nucleation and growth. At the same time, CdSe magic-sized QDs reveal broadband emission in the visible wavelength region, which advantageously offer simple integration of a single-type of nanomaterial and high color rendering ability for white light-emitting diodes (LEDs). Here, we optimized the quantum yield of magic-sized CdSe QDs up to 22% via controlling the synthesis parameters without any shelling or post-treatment process and integrated them in liquid-state on blue LED to prevent the efficiency drop due to host-material effect.

Micro and nanostructural analysis of a human tooth using correlated focused ion beam (FIB) and transmission Electron microscopy (TEM) investigations.

In this study, natural molar human tooth specimens were investigated for determining their micro- and nanoscale structural morphology, chemistry and crystallinity. The differences were tracked comparatively for both enamel and dentin layers and at their interfaces. Although dental material structures are hard and tough and the cross-sectioning of these materials using mechanical methods is challenging, FIB-SEM dual-beam instruments serve for preparing ultra-thin homogenous lamella sections.

Effective Neural Photostimulation Using Indium-Based Type-II Quantum Dots.

Light-induced stimulation of neurons via photoactive surfaces offers rich opportunities for the development of therapeutic methods and high-resolution retinal prosthetic devices. Quantum dots serve as an attractive building block for such surfaces, as they can be easily functionalized to match the biocompatibility and charge transport requirements of cell stimulation. Although indium-based colloidal quantum dots with type-I band alignment have attracted significant attention as a nontoxic alternative to cadmium-based ones, little attention has been paid to their photovoltaic potential as type-II heterostructures.

Structural control of InP/ZnS core/shell quantum dots enables high-quality white LEDs.

Herein, we demonstrate that the structural and optical control of InP-based quantum dots (QDs) can lead to high-performance light-emitting diodes (LEDs). Zinc sulphide (ZnS) shells passivate the InP QD core and increase the quantum yield in green-emitting QDs by 13-fold and red-emitting QDs by 8-fold. The optimised QDs are integrated in the liquid state to eliminate aggregation-induced emission quenching and we fabricated white LEDs with a warm, neutral and cool-white appearance by the down-conversion mechanism.

Focusing short-wavelength surface plasmons by a plasmonic mirror.

Emerging applications in nanotechnology, such as superresolution imaging, ultra-sensitive biomedical detection, and heat-assisted magnetic recording, require plasmonic devices that can generate intense optical spots beyond the diffraction limit. One of the important drawbacks of surface plasmon focusing structures is their complex design, which is significant for ease of integration with other nanostructures and fabrication at low cost. In this study, a planar plasmonic mirror without any nanoscale features is investigated that can focus surface plasmons to produce intense optical spots having lateral and vertical dimensions of λ/9.

Stokes-Shift-Engineered Indium Phosphide Quantum Dots for Efficient Luminescent Solar Concentrators.

Luminescent solar concentrators (LSCs) show promise because of their potential for low-cost, large-area, and high-efficiency energy harvesting. Stokes shift engineering of luminescent quantum dots (QDs) is a favorable approach to suppress reabsorption losses in LSCs; however, the use of highly toxic heavy metals in QDs constitutes a serious concern for environmental sustainability. Here, we report LSCs based on cadmium-free InP/ZnO core/shell QDs with type-II band alignment that allow for the suppression of reabsorption by Stokes shift engineering.

Conformation-mediated Förster resonance energy transfer (FRET) in blue-emitting polyvinylpyrrolidone (PVP)-passivated zinc oxide (ZnO) nanoparticles.

Homopolymers, such as polyvinylpyrrolidone (PVP), are commonly used to passivate the surface of blue-light emitting ZnO nanoparticles during colloid nucleation and growth. However, although PVP is known to auto-fluoresce at 400nm, which is near the absorption edge of ZnO, the impact of PVP adsorption characteristics on the surface of ZnO and the surface-related photophysics of PVP-capped ZnO nanoparticles is not well understood. To investigate, we have synthesized ZnO nanoparticles in solvents containing PVP of 3 concentrations-0.

Nanoscale elastic modulus variation in loaded polymeric micelle reactors.

Tapping mode atomic force microscopy (TM-AFM) enables mapping of chemical composition at the nanoscale by taking advantage of the variation in phase angle shift arising from an embedded second phase. We demonstrate that phase contrast can be attributed to the variation in elastic modulus during the imaging of zinc acetate (ZnAc)-loaded reverse polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) diblock co-polymer micelles less than 100 nm in diameter. Three sample configurations were characterized: (i) a 31.

Solution-processed LiF for work function tuning in electrode bilayers.

Although ambient processing is the key to low-cost organic solar cell production, high-vacuum thermal evaporation of LiF is often a limiting step, motivating the exploration of solution processing of LiF as an alternative electrode interlayer. Submonolayer films are realized with the assistance of polymeric micelle reactors that enable LiF particle deposition with controlled nanoscale surface coverage. Scanning Kelvin probe reveals a work function tunable with nanoparticle coverage with higher values than that of bare indium tin oxide (ITO).

Unidirectional broadband radiation of honeycomb plasmonic antenna array with broken symmetry.

Emerging plasmonic and photovoltaic applications benefit from effective interaction between optical antennas and unidirectional incident light over a wide spectrum. Here, we propose a honeycomb array of plasmonic nanoantennas with broken symmetry to obtain a unidirectional radiation pattern over a wide spectrum. The honeycomb nanoantenna array is based on a hexagonal grid with periodically arranged nanostructure building blocks.

Determining the morphology of polystyrene-block-poly(2-vinylpyridine) micellar reactors for ZnO nanoparticle synthesis.

We report the use of reverse PS-b-P2VP diblock copolymer micelles as true nanoscale-sized reactor vessels to synthesize ZnO nanoparticles. The reverse micelles were formed in toluene and then sequentially loaded with zinc acetate dihydrate and tetramethylammonium hydroxide reactants. Moreover, high spatial resolution Z-contrast imaging and EDX spectroscopy techniques were used to confirm the segregation of the Zn cation to the core of the loaded micelles.

Nanoscale composition mapping of segregation in micelles with tapping-mode atomic force microscopy.

Under energy-dissipative cantilevered tip-sample interaction, phase imaging using tapping-mode atomic force microscopy enables compositional mapping of composites containing a harder inorganic phase at the nanometer scale, embedded in a polymer matrix. The contrast in the phase images is shown to be dependent on the variation in the elastic properties of the diblock copolymer reverse micelles loaded with zinc acetate. Tapping conditions are also shown to determine whether the contrast is positive or negative for the harder core of the loaded micelles, based on the competition between attractive and repulsive tip-sample interaction forces.