Flexible conducting polymer-based cellulose substrates for on-skin applications.

Flexible electroactive cellulose-based substrates were successfully fabricated via electropolymerization of either polypyrrole (PPy) or poly(3,4-ethylenedioxythiophene) (PEDOT) in the presence of sodium dodecyl sulphate (SDS) onto platinum-coated cellulose substrates. Results showed that the conductive polymers were evenly deposited onto the platinum-coated cellulose substrates, respectively without compromising the submicro roughness topography of the substrate. In fact, nanoroughness feature was formed by the deposition of conductive polymers on the individual fibres of the cellulose paper, both of which are highly important in regulating cell adhesion, proliferation and migration.

Hyaluronan Receptor LYVE-1-Expressing Macrophages Maintain Arterial Tone through Hyaluronan-Mediated Regulation of Smooth Muscle Cell Collagen.

The maintenance of appropriate arterial tone is critically important for normal physiological arterial function. However, the cellular and molecular mechanisms remain poorly defined. Here, we have shown that in the mouse aorta, resident macrophages prevented arterial stiffness and collagen deposition in the steady state.

Hybrid Biomimetic Interfaces Integrating Supported Lipid Bilayers with Decellularized Extracellular Matrix Components.

This paper describes the functionalization of solid supported phospholipid bilayer with decellularized extracellular matrix (dECM) components, toward the development of biomimetic platforms that more closely mimic the cell surface environment. The dECM was obtained through a combination of chemical and enzymatic treatments of mouse adipose tissue that contains collagen, fibronectin, and glycosaminoglycans (GAGs). Using amine coupling chemistry, the dECM components were attached covalently to the surface of a supported lipid bilayer containing phospholipids with reactive carboxylic acid headgroups.

Fish scale-derived collagen patch promotes growth of blood and lymphatic vessels in vivo.

Unlabelled: In this study, Type I collagen was extracted from fish scales asa potential alternative source of collagen for tissue engineering applications. Since unmodified collagen typically has poor mechanical and degradation stability both in vitro and in vivo, additional methylation modification and 1,4-butanediol diglycidyl ether (BDE) crosslinking steps were used to improve the physicochemical properties of fish scale-derived collagen. Subsequently, in vivo studies using a murine model demonstrated the biocompatibility of the different fish scale-derived collagen patches.

Angiopoietin-like 4 induces a β-catenin-mediated upregulation of ID3 in fibroblasts to reduce scar collagen expression.

In adult skin wounds, collagen expression rapidly re-establishes the skin barrier, although the resultant scar is aesthetically and functionally inferior to unwounded tissue. Although TGFβ signaling and fibroblasts are known to be responsible for scar-associated collagen production, there are currently no prophylactic treatments for scar management. Fibroblasts in crosstalk with wound keratinocytes orchestrate collagen expression, although the precise paracrine pathways involved remain poorly understood.

Supercritical carbon dioxide extracted extracellular matrix material from adipose tissue.

Adipose tissue is a rich source of extracellular matrix (ECM) material that can be isolated by delipidating and decellularizing the tissue. However, the current delipidation and decellularization methods either involve tedious and lengthy processes or require toxic chemicals, which may result in the elimination of vital proteins and growth factors found in the ECM. Hence, an alternative delipidation and decellularization method for adipose tissue was developed using supercritical carbon dioxide (SC-CO) that eliminates the need of any harsh chemicals and also reduces the amount of processing time required.

A multi-material coating containing chemically-modified apatites for combined enhanced bioactivity and reduced infection via a drop-on-demand micro-dispensing technique.

Prevention of infection and enhanced osseointegration are closely related, and required for a successful orthopaedic implant, which necessitate implant designs to consider both criteria in tandem. A multi-material coating containing 1:1 ratio of silicon-substituted hydroxyapatite and silver-substituted hydroxyapatite as the top functional layer, and hydroxyapatite as the base layer, was produced via the drop-on-demand micro-dispensing technique, as a strategic approach in the fight against infection along with the promotion of bone tissue regeneration. The homogeneous distribution of silicon-substituted hydroxyapatite and silver-substituted hydroxyapatite micro-droplets at alternate position in silicon-substituted hydroxyapatite-silver-substituted hydroxyapatite/hydroxyapatite coating delayed the exponential growth of Staphylococcus aureus for up to 24 h, and gave rise to up-regulated expression of alkaline phosphatase activity, type I collagen and osteocalcin as compared to hydroxyapatite and silver-substituted hydroxyapatite coatings.

Comparative study of adipose-derived stem cells and bone marrow-derived stem cells in similar microenvironmental conditions.

Mesenchymal stem cells (MSCs), which were first isolated from the bone marrow, are now being extracted from various other tissues in the body, including the adipose tissue. The current study presents systematic evidence of how the adipose tissue-derived stem cells (ASCs) and bone marrow-derived mesenchymal stem cells (Bm-MSCs) behave when cultured in specific pro-adipogenic microenvironments. The cells were first characterized and identified as MSCs in terms of their morphology, phenotypic expression, self-renewal capabilities and multi-lineage potential.

Comparative Study of Adipose-Derived Stem Cells From Abdomen and Breast.

Background: Abdominal tissue enriched with adipose-derived stem cells (ASCs) is often used in cell-assisted lipotransfer procedures for breast reconstruction. However, as the tissue microenvironment and stem cell niche play important roles in defining the characteristics of the resident cells, it is hypothesized that the stem cell population present in the donor abdominal tissue has dissimilar properties as compared with the cells in the recipient breast tissue, which may ultimately affect the long-term success of the graft.

Methods: Adipose-derived stem cells were isolated from breast and abdominal fat tissues and characterized for mesenchymal-specific cell surface markers, and their population doubling, colony-forming capabilities, and proliferative properties were compared.

Single-step synthesis of heparin-doped polypyrrole nanoparticles for delivery of angiogenic factor.

Aim: To perform one-pot synthesis of heparin-immobilized polypyrrole (PPy) nanoparticles and evaluate the use of these nanoparticles for the delivery of VEGF.

Materials & Methods: Heparin-stabilized synthesis of PPy nanoparticles was performed via oxidative polymerization. VEGF-bound PPy-heparin nanoparticles were delivered to endothelial cells and bioactivity of VEGF was assessed by Matrigel tube formation.

Surface modification of PVDF using non-mammalian sources of collagen for enhancement of endothelial cell functionality.

Although polyvinylidene fluoride (PVDF) is non-toxic and stable in vivo, its hydrophobic surface has limited its bio-applications due to poor cell-material interaction and thrombus formation when used in blood contacting devices. In this study, surface modification of PVDF using naturally derived non-mammalian collagen was accomplished via direct surface-initiated atom transfer radical polymerisation (SI-ATRP) to enhance its cytocompatibility and hemocompatibility. Results showed that Type I collagen was successfully extracted from fish scales and bullfrog skin.

Cell-secreted extracellular matrix formation and differentiation of adipose-derived stem cells in 3D alginate scaffolds with tunable properties.

Three dimensional (3D) alginate scaffolds with tunable mechanical and structural properties are explored for investigating the effect of the scaffold properties on stem cell behavior and extracellular matrix (ECM) formation. Varying concentrations of crosslinker (20 - 60%) are used to tune the stiffness, porosity, and the pore sizes of the scaffolds post-fabrication. Enhanced cell proliferation and adipogenesis occur in scaffolds with 3.

PCL microspheres tailored with carboxylated poly(glycidyl methacrylate)-REDV conjugates as conducive microcarriers for endothelial cell expansion.

Microcarrier cell culture systems provide one of the most promising techniques for cell amplification due to their high surface area-to-volume ratio. In this study, biodegradable polycaprolactone (PCL) microspheres tethered with carboxylated poly(glycidyl methacrylate)-REDV conjugates were developed by a combination of surface-initiated atom transfer radical polymerization (ATRP) and azide-alkyne click chemistry as conducive microcarriers for rapid cell expansion of human umbilical vein endothelial cells (HUVECs). Azido-terminated poly(glycidyl methacrylate) (PGMA-N) brushes were grafted onto the PCL microspheres by surface-initiated ATRP.

Multifunctional REDV-conjugated zwitterionic polycarboxybetaine-polycaprolactone hybrid surfaces for enhanced antibacterial activity, anti-thrombogenicity and endothelial cell proliferation.

Ideal synthetic polymeric vascular scaffolds should provide an excellent physiological environment to facilitate cell adhesion and growth, and appropriate physicochemical properties to prevent thrombogenicity and secondary infection. In the current study, a multifunctional polycaprolactone (PCL) surface for simultaneously enhancing the adhesion and proliferation of endothelial cells (ECs), as well as inhibiting pathogenic microbial adhesion and preserving hemocompatibility was demonstrated. The achievement of such a multifunctional surface was accomplished by the conjugation of Arg-Glu-Asp-Val (REDV) short peptides to zwitterionic polycarboxybetaine brush-grafted PCL films via surface-initiated atom transfer radical polymerization (ATRP).

A Periosteum-Inspired 3D Hydrogel-Bioceramic Composite for Enhanced Bone Regeneration .

A 3D injectable hydrogel-bioceramic composite consisting of gelatin-3-(4-hydroxyphenyl) propionic acid (Gtn-HPA) and carboxymethyl cellulose-tyramine (CMC-Tyr), incorporated with fish scale-derived calcium phosphate (CaP), is developed for bone applications. The hydrogel-bioceramic composite has significantly improved the elastic modulus compared to the non-filled hydrogel, of which the addition of 10 w/v% CaP showed zero order fluorescein isothiocyanate (FITC)-dextran release profile and a significantly higher proliferation rate of encapsulated cells. All the samples promote the nucleation and growth of CaP minerals when exposed to 1× SBF.

Development of a miniaturized stimulation device for electrical stimulation of cells.

Background: Directing cell behaviour using controllable, on-demand non-biochemical methods, such as electrical stimulation is an attractive area of research. While there exists much potential in exploring different modes of electrical stimulation and investigating a wider range of cellular phenomena that can arise from electrical stimulation, progress in this field has been slow. The reasons for this are that the stimulation techniques and customized setups utilized in past studies have not been standardized, and that current approaches to study such phenomena rely on low throughput platforms with restricted variability of waveform outputs.

Imparting electroactivity to polycaprolactone fibers with heparin-doped polypyrrole: Modulation of hemocompatibility and inflammatory responses.

Hemocompatibility, anti-inflammation and anti-thrombogenicity of acellular synthetic vascular grafts remains a challenge in biomaterials design. Using electrospun polycaprolactone (PCL) fibers as a template, a coating of polypyrrole (PPy) was successfully polymerized onto the fiber surface. The fibers coated with heparin-doped PPy (PPy-HEP) demonstrated better electroactivity, lower surface resistivity (9-10-fold) and better anti-coagulation response (non-observable plasma recalcification after 30min vs.

Polymer-Enriched 3D Graphene Foams for Biomedical Applications.

Graphene foams (GFs) are versatile nanoplatforms for biomedical applications because of their excellent physical, chemical, and mechanical properties. However, the brittleness and inflexibility of pristine GF (pGF) are some of the important factors restricting their widespread application. Here, a chemical-vapor-deposition-assisted method was used to synthesize 3D GFs, which were subsequently spin-coated with polymer to produce polymer-enriched 3D GFs with high conductivity and flexibility.

Early controlled release of peroxisome proliferator-activated receptor β/δ agonist GW501516 improves diabetic wound healing through redox modulation of wound microenvironment.

Diabetic wounds are imbued with an early excessive and protracted reactive oxygen species production. Despite the studies supporting PPARβ/δ as a valuable pharmacologic wound-healing target, the therapeutic potential of PPARβ/δ agonist GW501516 (GW) as a wound healing drug was never investigated. Using topical application of polymer-encapsulated GW, we revealed that different drug release profiles can significantly influence the therapeutic efficacy of GW and consequently diabetic wound closure.

Bioactivated protein-based porous microcarriers for tissue engineering applications.

Microcarriers are commonly used in tissue engineering applications as they provide a large surface area for cell attachment. However, limited research has been done on ovalbumin (OVA), which is a relatively cheap protein found in avian egg white. Hence, in our current study OVA is fabricated into porous microcarriers and the effect of different OVA to alginate ratios on the properties of OVA microcarriers was investigated.

From flab to fab: transforming surgical waste into an effective bioactive coating material.

Cellular events are regulated by the interaction between integrin receptors in the cell membrane and the extracellular matrix (ECM). Hence, ECM, as a material, can potentially play an instructive role in cell-material interactions. Currently, adipose tissue in the form of lipoaspirate is often discarded.

Porous ovalbumin scaffolds with tunable properties: a resource-efficient biodegradable material for tissue engineering applications.

Natural materials are promising alternatives to synthetic materials used in tissue engineering applications as they have superior biocompatibility and promote better cell attachment and proliferation. Ovalbumin, a natural polymer found in avian egg white, is an example of a nature-derived material. Despite the availability and reported biocompatibility of ovalbumin, limited research has been carried out to investigate the efficacy of ovalbumin-based scaffolds for adipose tissue engineering applications.

Physical and mechanical characterisation of 3D-printed porous titanium for biomedical applications.

The elastic modulus of metallic orthopaedic implants is typically 6-12 times greater than cortical bone, causing stress shielding: over time, bone atrophies through decreased mechanical strain, which can lead to fracture at the implantation site. Introducing pores into an implant will lower the modulus significantly. Three dimensional printing (3DP) is capable of producing parts with dual porosity features: micropores by process (residual pores from binder burnout) and macropores by design via a computer aided design model.

Angiopoietin-like 4 stimulates STAT3-mediated iNOS expression and enhances angiogenesis to accelerate wound healing in diabetic mice.

Impaired wound healing is a major source of morbidity in diabetic patients. Poor outcome has, in part, been related to increased inflammation, poor angiogenesis, and deficiencies in extracellular matrix components. Despite the enormous impact of these chronic wounds, effective therapies are lacking.