Ion-Fluid Transport-Control Feedback along Nanopore Networks.

Biological signaling correlates with the interrelation between ion and nanofluidic transportation pathways. However, artificial embodies with reconfigurable ion-fluid transport interaction aspects remain largely elusive. Herein, we unveiled an intimate interplay between nanopore-driven advancing flow and ion carriage for the spontaneous imbibition of aqueous solutions at the nanoporous thin film level.

Polymeric liquids in mesoporous photonic structures: From precursor film spreading to imbibition dynamics at the nanoscale.

Polymers are known to wet nanopores with high surface energy through an atomically thin precursor film followed by slower capillary filling. We present here light interference spectroscopy using a mesoporous membrane-based chip that allows us to observe the dynamics of these phenomena in situ down to the sub-nanometer scale at milli- to microsecond temporal resolution. The device consists of a mesoporous silicon film (average pore size 6 nm) with an integrated photonic crystal, which permits to simultaneously measure the phase shift of thin film interference and the resonance of the photonic crystal upon imbibition.

Model-Based Analysis of Root Growth under the Action of Herbicides in Milli-Channel Arrays with Imaging.

Extracting practical information from the large amounts of data gathered during the live imaging analysis of plant organs is a challenging issue. The present work investigates the use of the logistic growth model to analyze experimental data from root elongation assays performed in milli-fluidic devices with imaging. was used as a bioindicator and was subjected to wide concentration ranges of four different herbicides: 2,4-D, atrazine, glyphosate, and paraquat.

Valveless On-Chip Aliquoting for Molecular Diagnosis.

The detection of nucleic acids as specific markers of infectious diseases is commonly implemented in molecular biology laboratories. The translation of these benchtop assays to a lab-on-a-chip format demands huge efforts of integration and automation. The present work is motivated by a strong requirement often posed by molecular assays that combine isothermal amplification and CRISPR/Cas-based detection: after amplification, a 2-8 microliter aliquot of the reaction products must be taken for the subsequent reaction.

Toward droplets displaying life-like interaction behaviors.

Developments in synthetic biology usually bring the conception of individual artificial cells. A key feature of living systems is, however, the interaction between individuals, in which living units can interact autonomously and display a role differentiation such as the case of entities chasing each other. On the other hand, droplets have become a very useful and exciting medium for modern microengineering and biomedical technologies.

Coupling ELISA to smartphones for POCT of chronic and congenital Chagas disease.

Chagas disease (CD) affects about 7 million people worldwide, presents a large prevalence in Latin America, and is growing in the rest of the world, where congenital CD is the main mode of transmission. Point-of-care testing (POCT) methods are increasingly required to ease early diagnostics and increase treatment success. This work presents the development and validation of a smartphone-integrated ELISA-based POCT system for the detection of both chronic and congenital CD.

Generation of curcumin-loaded albumin nanoparticles by using off-the-shelf microfluidics driven by gravity.

The generation albumin-based nanocarriers by precipitation from solution has great interest in the formulation of advanced nutritional products. Microfluidic techniques enable the implementation of low energy and continuum processes, with fast mass transfer and homogeneous mixing at the microscale. Here we describe the microfluidic generation of curcumin-loaded alpha lactalbumin nanoparticles in a simple and inexpensive way, by using off-the-shelf devices designed to produce solvent-shifting nanoprecipitation in core-sheath flows driven by gravity, which has not been reported before.

Field-deployable aptasensor with automated analysis of stain patterns for the detection of chlorpyrifos in water.

Organophosphorus compounds such as chlorpyrifos (CPS) are causing serious environmental problems worldwide. Efficient monitoring of the CPS levels in water resources demands portable devices for on-field testing. Here we report the development of a CPS sensor coupled with smartphones for automated reading and data analysis.

Droplets in underlying chemical communication recreate cell interaction behaviors.

The sensory-motor interaction is a hallmark of living systems. However, developing inanimate systems with "recognize and attack" abilities remains challenging. On the other hand, controlling the inter-droplet dynamics on surfaces is key in microengineering and biomedical applications.

A free customizable tool for easy integration of microfluidics and smartphones.

The integration of smartphones and microfluidics is nowadays the best possible route to achieve effective point-of-need testing (PONT), a concept increasingly demanded in the fields of human health, agriculture, food safety, and environmental monitoring. Nevertheless, efforts are still required to integrally seize all the advantages of smartphones, as well as to share the developments in easily adoptable formats. For this purpose, here we present the free platform appuente that was designed for the easy integration of microfluidic chips, smartphones, and the cloud.

Nanopore-Mediated Spontaneous Dilution of Droplets: When Evaporation Turns to a Dilutor.

Droplet evaporation on surfaces is ubiquitous and affects areas as diverse as climate, microbiology, the chemical industry, and materials science. While solute concentration is the universally taken-for-granted behavior in drop evaporation, the present work shows that saline droplets evaporating on nanoporous thin-film surfaces can get diluted rather than concentrated. The driving mechanism of this phenomenon is attributed to the flow drawn from the drop through the nanopores by an annular peripheral evaporation.

Precursor Film Spreading during Liquid Imbibition in Nanoporous Photonic Crystals.

When a macroscopic droplet spreads, a thin precursor film of liquid moves ahead of the advancing liquid-solid-vapor contact line. Whereas this phenomenon has been explored extensively for planar solid substrates, its presence in nanostructured geometries has barely been studied so far, despite its importance for many natural and technological fluid transport processes. Here we use porous photonic crystals in silicon to resolve by light interferometry capillarity-driven spreading of liquid fronts in pores of few nanometers in radius.

Nanopore-Enhanced Drop Evaporation: When Cooler or More Saline Water Droplets Evaporate Faster.

The evaporation of water droplets on surfaces is a ubiquitous phenomenon in nature and has critical importance in a broad range of technical applications. Here, we show a substantial enhancement of liquid evaporation rate when droplets are on nanoporous thin film surfaces. We also reveal how this nanopore-enhanced evaporation leads to counterintuitive phenomena: cooler or more saline water droplets evaporate faster.

Comprehensive model of electromigrative transport in microfluidic paper based analytical devices.

A complete mathematical model for electromigration in paper-based analytical devices is derived, based on differential equations describing the motion of fluids by pressure sources and EOF, the transport of charged chemical species, and the electric potential distribution. The porous medium created by the cellulose fibers is considered like a network of tortuous capillaries and represented by macroscopic parameters following an effective medium approach. The equations are obtained starting from their open-channel counterparts, applying scaling laws and, where necessary, including additional terms.

USB powered microfluidic paper-based analytical devices.

Microfluidic paper-based analytical devices (μPADs) allow user-friendly and portable chemical determinations, although they provide limited applicability due to insufficient sensitivity. Several approaches have been proposed to address poor sensitivity in μPADs, but they frequently require bulky equipment for power and/or read-outs. Universal serial buses (USB) are an attractive alternative to less portable power sources and are currently available in many common electronic devices.

Directional Water Collection in Nanopore Networks.

The development of artificial nanosystems that mimic directional water-collecting ability of evolved biological surfaces is eagerly awaited. Here we report a new type of addressable water collection that is induced by coupling both vapor gradients, like a road drawn, and the temperature-tuned condensation in nanopores as step signals. What distinguishes the motion described here from the motions reported earlier is the fact that neither bulk liquid infiltration nor displacement of droplet is required.

Patterning and Modeling Three-Dimensional Microfluidic Devices Fabricated on a Single Sheet of Paper.

This work describes a method to fabricate three-dimensional paper microfluidic devices in one step, without the need of stacking layers of paper, glue, or tape. We used a nontransparent negative photoresist that allows patterning selectively (vertically) the paper, creating systems of two or three layers, including channels. To demonstrate the capabilities of this methodology, we designed, fabricated, and tested a six-level diluter.

Milli-channel array for direct and quick reading of root elongation bioassays.

A novel platform to perform systematic analysis and direct reading of root elongation bioassays is presented. The device was designed to include multiplexed microenvironments for the germination and growth of individual seeds, which allows observation by the naked eye or by optical systems, notably cellphone cameras. Prototypes were fabricated by laser micromachining on a highly transparent material that is fully compatible with biological systems.

Spontaneous water adsorption-desorption oscillations in mesoporous thin films.

Understanding fluid transport and phase changes in nanopore structures is of great interest to many application fields, from energy conversion to water harvesting. This work discusses the spontaneous oscillations of the water saturation of mesoporous thin films, in the zone adjacent to a sessile water drop, at ambient conditions. The wetting-front dynamics onto the film is described by considering three coexisting phenomena: infiltration from the water drop, condensation from air vapor, and evaporation to the ambient.

Design keys for paper-based concentration gradient generators.

The generation of concentration gradients is an essential operation for several analytical processes implemented on microfluidic paper-based analytical devices. The dynamic gradient formation is based on the transverse dispersion of chemical species across co-flowing streams. In paper channels, this transverse flux of molecules is dominated by mechanical dispersion, which is substantially different than molecular diffusion, which is the mechanism acting in conventional microchannels.

Transverse solute dispersion in microfluidic paper-based analytical devices (μPADs).

The transport of molecules and particles across adjacent flow streams is a key process in several operations implemented in microfluidic paper-based analytical devices (μPADs). Here, the transverse dispersion of analytes was quantitatively evaluated by theory and experiments. Different tests were carried out to independently measure the coefficients of both Brownian diffusion and mechanical dispersion under capillary-driven flow.

An Open Pit Nanofluidic Tool: Localized Chemistry Assisted by Mesoporous Thin Film Infiltration.

Nanofluidics based on nanoscopic porous structures has emerged as the next evolutionary milestone in the construction of versatile nanodevices with unprecedented applications. However, the straightforward development of nanofluidically interconnected systems is crucial for the production of practical devices. Here, we demonstrate that spontaneous infiltration into supramolecularly templated mesoporous oxide films at the edge of a sessile drop in open air can be used to connect pairs of landmarks.

Modeling the abnormally slow infiltration rate in mesoporous films.

Mesoporous films have been shown to exhibit striking behaviors in capillary-driven infiltration experiments. The process has been shown to follow classical Lucas-Washburn dynamics, but the effective pore radius has been calculated from hydrodynamic resistance considerations to be orders of magnitude lower than measured pore dimensions. In addition, the infiltration rate has been observed to decrease with increasing pore diameter, in contrast to the expected trend for capillary-like pores.

Complex Filling Dynamics in Mesoporous Thin Films.

The fluid-front dynamics resulting from the coexisting infiltration and evaporation phenomena in nanofluidic systems has been investigated. More precisely, water infiltration in both titania and silica mesoporous films was studied through a simple experiment: a sessile drop was deposited over the film and the advancement of the fluid front into the porous structure was optically followed and recorded in time. In the case of titania mesoporous films, capillary infiltration was arrested at a given distance, and a steady annular region of the wetted material was formed.

Rational design of capillary-driven flows for paper-based microfluidics.

The design of paper-based assays that integrate passive pumping requires a precise programming of the fluid transport, which has to be encoded in the geometrical shape of the substrate. This requirement becomes critical in multiple-step processes, where fluid handling must be accurate and reproducible for each operation. The present work theoretically investigates the capillary imbibition in paper-like substrates to better understand fluid transport in terms of the macroscopic geometry of the flow domain.