Optimized protocol for high-vacuum scanning electron microscopy analysis of polyacrylamide hydrogel-attached sperm cells in a binary system.

A protocol for the analysis of a binary system comprising polyacrylamide hydrogel-attached sperm cells using high-vacuum scanning electron microscopy (SEM) is presented. This protocol focuses on optimizing the SEM procedure to obtain accurate and detailed imaging of the sperm cells and their interactions with the hydrogel scaffold. The methodology involves a stepwise sample preparation, including sample dehydration through a gradual exchange of ethanol/water ratios, followed by the application of a conductive metal coating.

Biointerfacial behavior of stallion spermatozoa adhered to hydrogel surfaces: Impact of the hydrogel chemical composition and the culture medium.

Novel soft materials based on hydrogel are proposed to enhance the selection of high-quality stallion sperm based on their adhesion capacity. The hydrogel surfaces are derived from polyacrylamide (PAAm), which is copolymerized with neutral and ionic co-monomers to modify the interfacial properties. The hydrogels undergo characterization through FTIR spectroscopy, assessment of swelling capacity, and wettability under various experimental conditions.

Bull sperm selection by attachment to hyaluronic acid semi-interpenetrated hydrogels.

We report the development of a hydrogel-based approach to select bull spermatozoa, a crucial step for successful assisted reproductive techniques (ARTs). Hyaluronic acid (HA) semi-interpenetrated N-isopropylacrylamide (PNIPAM) co-20% N-Tris (hydroxymethyl) methyl acrylamide (HMA) hydrogels were synthetized on glass surfaces and cultured in presence of frozen-thawed bull spermatozoa. A fraction of motile bull spermatozoa population strongly attached to hydrogels and was partially released by treatment with hyaluronidase.

Electromagnetic radiation driving of volume changes in nanocomposites made of a thermosensitive hydrogel polymerized around conducting polymer nanoparticles.

Polymeric nanocomposites were obtained by the formation of a thermosensitive hydrogel matrix around conducting polymer (CP) nanoparticles. The CP is able to absorb electromagnetic radiation which is converted into heat and induces the phase transition of the surrounding hydrogel. The method chosen to form the hydrogel is the free radical polymerization of a copolymer (-isopropylacrylamide (NIPAM) and 2-acrylamide-2-methylpropano sulfonic acid (AMPS), PNIPAM--2% AMPS) in the presence of bisacrylamide as the crosslinker.

Mechanical and physicochemical behavior of a 3D hydrogel scaffold during cell growth and proliferation.

Some of the essential properties for cellular scaffolding are the capability to maintain the three-dimensional (3D) structure, good adhesion, and adequate elastic modulus during cell growth, migration, and proliferation. Biocompatible synthetic hydrogels are commonly used as cellular scaffolds because they can mimic the natural extracellular matrices (ECMs). However, it is possible that the physicochemical and mechanical behavior of the scaffold changes during cell proliferation and loses the scaffold properties but this is rarely monitored.

Synthesis of a Smart Conductive Block Copolymer Responsive to Heat and Near Infrared Light.

A method for the synthesis of a linear block copolymer (PNIPAM--PANI), containing a thermoresponsive block (poly(-isopropylacrylamide), PNIPAM) and a Near Infrared (NIR) light-absorbing block (polyaniline, PANI), is reported. The synthetic approach involves a two-step successive polymerization reaction. First, the radical polymerization of NIPAM is done using 4-aminothiophenol as a chain transfer agent for the obtention of thermosensitive block terminated with an aniline (ANI) moiety.

Highly effective antimicrobial nanocomposites based on hydrogel matrix and silver nanoparticles: long-lasting bactericidal and bacteriostatic effects.

Antimicrobial nanocomposites (NCs) are being used as an alternative antibacterial therapy for killing antibiotic-resistant pathogenic bacteria. The NCs are made of Ag nanoparticles (AgNPs) inside biocompatible hydrogel matrixes. The NCs were synthesized by the absorption of AgNO solution into a hydrogel matrix, followed by UV light irradiation, without using additional toxic reactants.

Cytotoxicity and bioadhesive properties of poly--isopropylacrylamide hydrogel.

Several hydrogel surfaces present properties that simulate the mechanical and physicochemical features of extracellular matrix (ECM), providing a platform that mimic the native cellular milieus. Poly--isopropylacrylamide (PNIPAM) hydrogels are receiving attention in biomedical field due to their thermosensibility and soft texture. However, more extensive biocompatibility and cellular interactions studies with cell lines are needed.

Improving the retention and reusability of Alpha-amylase by immobilization in nanoporous polyacrylamide-graphene oxide nanocomposites.

Alpha-amylase was immobilized inside three different polymeric matrices: polyacrylamide hydrogel (PAAm), polyacrylamide-graphene oxide nanocomposite (PAAm-GO) and alginate in order to study and compare the effect of the matrix on the catalytic performance. The morphology, swelling, mechanical properties, retention efficiency, and the catalytic behavior of these newly supported biocatalysts were studied. Nanocomposite made of PAAm-GO matrix incorporated 98% of the enzyme, likely through a cooperative effect, while alginate gels incorporated only 30%.

Synthesis of polyaniline (PANI) and functionalized polyaniline (F-PANI) nanoparticles with controlled size by solvent displacement method. Application in fluorescence detection and bacteria killing by photothermal effect.

Polyaniline nanoparticles (PANI-NPs) were easily obtained applying the solvent displacement method by using N-methylpyrrolidone (NMP) as good solvent and water as poor solvent. Different polymers such as polyvinylpyrrolidone (PVP), chondroitin sulfate (ChS), polyvinyl alcohol (PVA), and polyacrylic acid (PAA) were used as stabilizers. Dynamic light scattering and scanning electron microscopy corroborated the size and morphology of the formed NPs.

Physicochemical properties of ionic and non-ionic biocompatible hydrogels in water and cell culture conditions: Relation with type of morphologies of bovine fetal fibroblasts in contact with the surfaces.

Cationic, anionic and non-ionic hydrogels having acrylamide polymer backbones were synthesized via free radical polymerization with N,N-methylenebisacrylamide (BIS) as crosslinker. The chemical structures of the hydrogels were characterized by Fourier Transform Infrared Spectroscopy (FTIR). Physicochemical properties such as swelling kinetic, maximum swelling capacity, volume phase transition temperature (VPTT) and wettability (static water contact angle) of hydrogels swollen in aqueous and cell culture medium, at room and cell culture temperatures were studied.

Bioethanol production by reusable Saccharomyces cerevisiae immobilized in a macroporous monolithic hydrogel matrices.

Performance of yeasts on industrial processes can be dramatically improved by immobilization of the biocatalyst. The immobilization of Saccharomyces cerevisiae inside monolithic macroporous hydrogels were produced by in-situ polymerization of acrylamide around a live yeast suspension under cryogelation conditions. Preculture of the yeasts was not necessary and this innovative and simple procedure is amenable to scaling-up to industrial production.

Smart polyaniline nanoparticles with thermal and photothermal sensitivity.

Conductive polyaniline nanoparticles (PANI NPs) are synthesized by oxidation of aniline with persulfate in acid media, in the presence of polymeric stabilizers: polyvinilpyrrolidone (PVP), poly(N-isopropylacrylamide) (PNIPAM), and hydroxylpropylcellulose (HPC). It is observed that the size of the nanoparticles obtained depends on the polymeric stabilizer used, suggesting a mechanism where the aggregation of polyaniline molecules is arrested by adsorption of the polymeric stabilizer. Indeed, polymerization in the presence of a mixture of two polymers having different stabilizing capacity (PVP and PNIPAM) allows tuning of the size of the nanoparticles.

Functionalised conjugated materials as building blocks of electronic nanostructures.

Two different approaches towards conjugated material (carbon nanotubes, conjugated polymers) functionalisation are presented: covalent bonding of functional groups and covalent interaction with soluble polymers. Covalent functionalisation of carbon nanotubes is made by reaction of the aromatic ring with aryl radicals, produced by reduction of diazonium ions. In the case of conducting polymers, covalent functionalisation is brought about by reaction of polyanilines with diazotized aromatic amines (including amino terminated azo dyes).

Photoreduction of Ru(bpy)(3)2+ by amines in aqueous solution. Kinetics characterization of a long-lived nonemitting excited state.

The photochemistry of Ru(bpy)(3)+2 in the presence of amines was investigated in water by laser flash photolysis. N,N'-Dimethylaniline and p-phenylenediamine quench the luminescent metal to ligand charge transfer (MLCT) excited state of the complex by an electron transfer reaction that produces the semireduced form Ru(bpy)3+ in relatively high yields. On the other hand, triethylamine (TEA) and aniline do not quench the MLCT.

Distribution of amines in water/AOT/n-hexane reverse micelles: influence of the amine chemical structure.

The distribution of different aliphatic and aromatic amines: n-butylamine (n-BA), isobutylamine (i-BA), tert-butylamine (t-BA), piperidine (PIP), N,N-dimethylaniline (DMA) and N-methylaniline (MA) in water/sodium 1,4-bis(2-ethylhexyl)sulfosuccinate(AOT)/n-hexane reverse micelles was investigated by steady-state fluorescence measurements. The partition constants were measured by an indirect method based on the effect that amine partitioning exert on the bimolecular rate of the reaction between a microphase incorporated fluorophore (Ru(bpy)2+(3)) and the quencher, (Fe(CN)3-(6)). For MA, that can act as a quencher of the fluorophore a direct method was used.

The quenching of indolic compounds by monosubstituted benzenes and the photoreaction with chlorobenzene.

The quenching of the excited singlet of indole and its methyl derivatives by monosubstituted benzenes has been studied in three solvents of different polarities and bimolecular quenching rate constants have been determined. Below the diffusion limit the rate constants decrease when solvent polarity increases, with the exception of those for the quenching by benzonitrile. For the latter the rate constants are near the diffusion limit in all cases.