Phage-based decontamination has rarely been explored in real-world settings, particularly in the environments of patients undergoing extracorporeal membrane oxygenation (ECMO). This four-year prospective study aimed to evaluate the effectiveness of aerosolized phage cocktails tailored to combat target antibiotic-resistant species of Acinetobacter baumannii, Klebsiella pneumoniae, Pseudomonas aeruginosa, and Stenotrophomonas maltophilia. The decontamination procedure with phage aerosols was proactively implemented before the admission of ECMO patients based on a thorough analysis of phage typing results from bacterial species isolated from prospective patient areas during the preceding two months.
View Article and Find Full Text PDFRecently, advances in enhancing corrosion properties through various techniques, and the clinical application of biodegradable cardiovascular stents made from magnesium (Mg) alloys face challenges to corrosion resistance, blood compatibility, and biocompatibility. Drug-eluting stents (DES) offer a solution to enhance the corrosion resistance of Mg alloys while simultaneously reducing the occurrence of restenosis. In this study, WE43 Mg alloy was pretreated using electropolishing technology, and different polymers (PEG and PLLA) were used as drug-polymer coatings for the Mg alloy.
View Article and Find Full Text PDFBackground: Bone grafting is the standard treatment for critical bone defects, but autologous grafts have limitations like donor site morbidity and limited availability, while commercial artificial grafts may have poor integration with surrounding bone tissue, leading to delayed healing. Magnesium deficiency negatively impacts angiogenesis and bone repair. Therefore, incorporating magnesium into a synthetic biomaterial could provide an excellent bone substitute.
View Article and Find Full Text PDFThe standard penetration test (SPT), seismic cone penetration test (SCPT), and various seismic tests are commonly utilized for geotechnical site investigations. The investigated data via these tests are widely adopted to capture site characteristics for geotechnical engineering design. However, site characterizations vary in the above tests, which leads to uncertainties in the corresponding engineering analysis and design.
View Article and Find Full Text PDFBackground: The potential of biodegradable magnesium (Mg) skin staple has recently garnered widespread attention due to their biodegradability and biocompatibility rather than traditional stainless steel staples, the most commonly used in current clinical practice. The aim of this study is to evaluate the safety and mechanical properties of a novel biodegradable Mg skin staple.
Methods: A prototype of Mg skin staple was designed using a novel ZK60 Mg alloy.
Only a few studies have so far focused on the addition of silver to SS316L alloys by conventional sintering methods. Unfortunately, the metallurgical process of silver-containing antimicrobial SS is greatly limited due to the extremely low solubility of silver in iron and its tendency to precipitate at the grain boundaries, resulting in an inhomogeneous distribution of the antimicrobial phase and loss of antimicrobial properties. In this work, we present a novel approach to fabricate antibacterial stainless steel 316L by functional polyethyleneimine-glutaraldehyde copolymer (PEI-co-GA/Ag catalyst) composites.
View Article and Find Full Text PDFResource recycling has become an integral part of environmental protection efforts. At present, the development of Taiwan's resource recovery and related works are quite mature. However, laborers or volunteers working in resource recycling stations may be exposed to different types of hazards during the recycling process.
View Article and Find Full Text PDFThis study aimed to establish a surface modification technology for ZK60 magnesium alloy implants that can degrade uniformly over time and promote bone healing. It proposes a special micro-arc oxidation (MAO) treatment on ZK60 alloy that enables the composite electrolytes to create a coating with better corrosion resistance and solve the problems of uneven and excessive degradation. A magnesium alloy bone screw made in this way was able to promote the bone healing reaction after implantation in rabbits.
View Article and Find Full Text PDFThe influence of long-range transport (LRT) of air pollutants on neighboring regions and countries has been documented. The magnitude of LRT aerosols and related constituents can misdirect control strategies for local air quality management. In this study, we aimed to quantify PM (diameter less than 2.
View Article and Find Full Text PDFUsing bacteriophages (phages) as environmental sanitizers has been recognized as a potential alternative method to remove bacterial contamination in vitro; however, very few studies are available on the application of phages for infection control in hospitals. Here, we performed a 3-year prospective intervention study using aerosolized phage cocktails as biocontrol agents against carbapenem-resistant Acinetobacter baumannii (CRAB) infection in the hospital. When a CRAB-infected patient was identified in an intensive care unit (ICU), their surrounding environment was chosen for phage aerosol decontamination.
View Article and Find Full Text PDFThe rapid monitoring of total fungi, including air and surface fungal profiling, is an important issue. Here, we applied air and surface sampling, combined with digital image quantification of surface mold spots, to evaluate the contribution of surface fungi to airborne fungal concentrations. , , , and yeast often appeared in the air or on wall surfaces during sampling.
View Article and Find Full Text PDFMicro arc oxidation (MAO) is a prominent surface treatment to form bioceramic coating layers with beneficial physical, chemical, and biological properties on the metal substrates for biomaterial applications. In this study, MAO treatment has been performed to modify the surface characteristics of AZ31 Mg alloy to enhance the biocompatibility and corrosion resistance for implant applications by using an electrolytic mixture of Ca(PO) and CHNO (EDTA) in the solutions. For this purpose, the calcium phosphate (Ca-P) containing thin film was successfully fabricated on the surface of the implant material.
View Article and Find Full Text PDFThe levels and characteristics of atmospheric metals vary in time and location, can result in various health impacts, which increases the challenge of air quality management. We aimed to investigate PM-bound metals in multiple locations and propose a methodology for comparing metal elements across study regions and prioritizing source contributions through integrated health risk assessments. PM-bound metals were collected in the urban, suburban, rural, and industrial regions of Taiwan between 2016 and 2018.
View Article and Find Full Text PDFLong-range transport (LRT) reportedly carries air pollutants and microorganisms to downwind areas. LRT can be of various types, such as dust storm (DS) and frontal pollution (FP); however, studies comparing their effects on bioaerosols are lacking. This study evaluated the effect of LRT on viral and bacterial concentrations in Northern Taiwan.
View Article and Find Full Text PDFAirborne bacteria in hospitals have been implicated in nosocomial infections. This investigation studied the characteristics of airborne bacteria and the effect of patient visitation on the bacteria profile in intensive care units (ICUs). Air at a medical ICU and surgical ICU was sampled for one year.
View Article and Find Full Text PDFTo control the degradation rate of magnesium (Mg) alloys, chitosan (CHI) and L-glutamic acid (LGA) were used as coatings on Mg-Zn-Ca alloys via dip coating. In this study, either two or seven CHI/LGA layers were applied as a coating on Mg-2.8Zn-0.
View Article and Find Full Text PDFRapid monitoring of the microbial content in indoor air is an important issue. In this study, we develop a method for applying a Coriolis sampler coupled with a portable ATP luminometer for characterization of the collection efficiency of bioaerosol samplers and then test this approach in field applications. The biological collection efficiencies of the Coriolis sampler and a BioSampler for collecting four different types of bioaerosols, including , , and endospores of were compared in a chamber study.
View Article and Find Full Text PDFMater Sci Eng C Mater Biol Appl
December 2019
The application of bacteriophages for biocontrol has attracted increasing attention. Here, we applied ϕBTCU-1 as a model phage to develop a method for controlling (MTB) by using a bacteriophage-containing aerosol in a chamber study. The soil-isolated ϕBTCU-1 can infect both MTB and .
View Article and Find Full Text PDFGreen spaces have benefits but may also increase the risk of allergic disease. This study examined the association between the first occurrence of asthma and greenness exposure in children and teenagers. We conducted a 1:1 matched case-control study matched by sex, age, and the first diagnosis year with 7040 eligible subjects from a systematic sampling cohort database in Taiwan from 2001 to 2013.
View Article and Find Full Text PDFInt J Environ Res Public Health
October 2018
Dry eye disease (DED) has become a common eye disease in recent years and appears to be influenced by environmental factors. This study aimed to examine the association between the first occurrence of DED, air pollution and weather changes in Taiwan. We used the systematic sampling cohort database containing 1,000,000 insureds of the National Health Insurance of Taiwan from 2004 to 2013, and identified a total of 25,818 eligible DED subjects.
View Article and Find Full Text PDFIntroduction: Stoneworkers in Taiwan are exposed to occupational noise and suffer hearing impairment. A complete assessment of exposure and health effects is needed for a better understanding.
Materials And Methods: We accessed nine stone factories, monitored the environmental and personal doses of noise, analyzed the frequency spectra of noise from various machines, and recruited 55 stoneworkers and 25 administrative staff as controls for pure tone audiometry testing.
The accurate quantification of antibiotic-resistant bacteria in indoor air has recently attracted increasing attention. Here, we investigated whether the susceptibility of a nosocomial infection-related microbe, Acinetobacter baumannii, to strong sampling stress caused by Nuclepore filter changes as it develops resistance to a drug called colistin. Both colistin-sensitive A.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
August 2018
We conducted a pilot study to examine pesticides in dust of homes in a rural county of Taiwan. A total of 56 homes of pregnant women were included in the study. Indoor and outdoor dust was collected by a vacuum sampler and a dustpan/brush set, respectively.
View Article and Find Full Text PDFAntibiotic-resistant Acinetobacter baumannii is associated with nosocomial infections worldwide. Here, we used clinically isolated A. baumannii strains as models to demonstrate whether antibiotic resistance is correlated with an increased susceptibility to bacteriophages.
View Article and Find Full Text PDF