Assessment of emissions and exposure in 3D printing workplaces in Taiwan.

Three-dimensional (3D) printing is an emerging and booming industry in Taiwan. Compared to traditional manufacturing, 3D printing has various advantages, such as advanced customization, additive manufacturing, reduced mold opening time, and reduced consumption of precursors. In this study, the real-time monitoring of particulate matter (PM) and total volatile organic compound (TVOC) emissions from various filaments is investigated using fused deposition modeling with material extrusion technology, a liquid-crystal display, a stereolithography apparatus based on vat photopolymerization technology, and binder jetting for occupational settings.

Photochemical oxidation of VOCs and their source impact assessment on ozone under de-weather conditions in Western Taiwan.

The application of statistical models has excellent potential to provide crucial information for mitigating the challenging issue of ozone (O) pollution by capturing its associations with explanatory variables, including reactive precursors (VOCs and NO) and meteorology. Considering the large contribution of O in degrading the air quality of western Taiwan, three-year (2019-2021) hourly concentration data of VOC, NO and O from 4 monitoring stations of western Taiwan: Tucheng (TC), Zhongming (ZM), Taixi (TX) and Xiaogang (XG), was evaluated to identify the effect of anthropogenic emissions on O formation. Owing to the high-ambient reactivity of VOCs on the underestimation of sources, photochemical oxidation was assessed to calculate the consumed VOC (VOC) which was followed by the source identification of their initial concentrations.

Source-apportionment and spatial distribution analysis of VOCs and their role in ozone formation using machine learning in central-west Taiwan.

This study assessed the machine learning based sensitivity analysis coupled with source-apportionment of volatile organic carbons (VOCs) to look into new insights of O pollution in Yunlin County located in central-west region of Taiwan. One-year (Jan 1 to Dec 31, 2021) hourly mass concentrations data of 54 VOCs, NO, and O from 10 photochemical assessment monitoring stations (PAMs) in and around the Yunlin County were analyzed. The novelty of the study lies in the utilization of artificial neural network (ANN) to evaluate the contribution of VOCs sources in O pollution in the region.

The influence of COVID-19 pandemic on PM air quality in Northern Taiwan from Q1 2020 to Q2 2021.

The study aimed to investigate the PM variations in different periods of COVID-19 control measures in Northern Taiwan from Quarter 1 (Q1) 2020 to Quarter 2 (Q2) 2021. PM sources were classified based on long-range transport (LRT) or local pollution (LP) in three study periods: one China lockdown (P1), and two restrictions in Taiwan (P2 and P3). During P1 the average PM concentrations from LRT (LRT-PM) were higher at Fuguei background station by 27.

Getting insight into the influence of coexisting airborne nanoparticles on gas adsorption performance over porous materials.

Adsorption as one of the most important air cleaning methods has been extensively applied during which the coexisting airborne nanoparticles (NPs) with sizes close to adsorbent pore sizes could inevitably influence gas adsorption processes. In this work, the influence of sub-20 nm NPs on toluene adsorption on ZSM-5 zeolites exchanged with different cations (Li, Na and K) were studied based on gas-and-particle coexisting adsorption/filtration tests. Affinities for both toluene and NPs on adsorbents follow Li-ZSM-5 > Na-ZSM-5 > K-ZSM-5 regarding the orders of charge density, pore size, and internal and external specific surface areas.

Development of a Novel Shallow Liquid Interface Exposure System for MWCNT Toxicity Assessment.

Increasing applications of multiwalled carbon nanotubes (MWCNT) lead to significant occupational exposure and potential health concerns. Toxicity of MWCNT should be carefully elucidated since the conventional (CON) method with fully immersed condition fails to mimic the air-liquid interface (ALI) in airways. Additionally, quantification of MWCNT in cells was a real challenge.

Detection of Particulate Matter of Size 2.5 μm with a Surface-Acoustic-Wave Sensor Combined with a Cyclone Separator.

A device to monitor particulate matter of size 2.5 μm (PM2.5) that has been designed and developed includes a surface-acoustic-wave sensor operating in a shear horizontal mode (SH-SAW) combined with a cyclone separator.

A review on recent progress in observations, sources, classification and regulations of PM in Asian environments.

Natural and human activities generate a significant amount of PM (particles ≤2.5 μm in aerodynamic diameter) into the surrounding atmospheric environments. Because of their small size, they can remain suspended for a relatively longer time in the air than coarse particles and thus can travel long distances in the atmosphere.

The rural carbonaceous aerosols in coarse, fine, and ultrafine particles during haze pollution in northwestern China.

The carbonaceous aerosol concentrations in coarse particle (PM10: Dp ≤ 10 μm, particulate matter with an aerodynamic diameter less than 10 μm), fine particle (PM2.5: Dp ≤ 2.5 μm), and ultrafine particle (PM0.

Novel Wire-on-Plate Electrostatic Precipitator (WOP-EP) for Controlling Fine Particle and Nanoparticle Pollution.

A new wire-on-plate electrostatic precipitator (WOP-EP), where discharge wires are attached directly on the surface of a dielectric plate, was developed to ease the installation of the wires, minimize particle deposition on the wires, and lower ozone emission while maintaining a high particle collection efficiency. For a lab-scale WOP-EP (width, 50 mm; height, 20 mm; length, 180 mm) tested at the applied voltage of 18 kV, experimental total particle collection efficiencies were found as high as 90.9-99.

Evaluation of a novel personal nanoparticle sampler.

This work investigated the performance in terms of collection efficiency and aspiration efficiency of a personal sampler capable of collecting ultrafine particles (nanoparticles) in the occupational environment. This sampler consists of a cyclone for respirable particle classification, micro-orifice impactor stages with an acceleration nozzle to achieve nanoparticle classification and a backup filter to collect nanoparticles. Collection efficiencies of the cyclone and impactor stages were determined using monodisperse polystyrene latex and silver particles, respectively.

Comparison and implications of PM₂.₅ carbon fractions in different environments.

The concentrations of PM₂.₅ carbon fractions in rural, urban, tunnel and remote environments were measured using the IMPROVE thermal optical reflectance (TOR) method. The highest OC1 and EC1 concentrations were found for tunnel samples, while the highest OC2, OC3, and OC4 concentrations were observed for urban winter samples, respectively.

Novel active personal nanoparticle sampler for the exposure assessment of nanoparticles in workplaces.

A novel active personal nanoparticle sampler (PENS), which enables the collection of both respirable particulate mass (RPM) and nanoparticles (NPs) simultaneously, was developed to meet the critical demand for personal sampling of engineered nanomaterials (ENMs) in workplaces. The PENS consists of a respirable cyclone and a micro-orifice impactor with the cutoff aerodynamic diameter (d(pa50)) of 4 μm and 100 nm, respectively. The micro-orifice impactor has a fixed micro-orifice plate (137 nozzles of 55 μm in the inner diameter) and a rotating, silicone oil-coated Teflon filter substrate at 1 rpm to achieve a uniform particle deposition and avoid solid particle bounce.

Concentrations of ultrafine particles at a highway toll collection booth and exposure implications for toll collectors.

Research regarding the magnitude of ultrafine particle levels at highway toll stations is limited. This study measured ambient concentrations of ultrafine particles at a highway toll station from October 30 to November 1 and November 5 to November 6, 2008. A scanning mobility particle sizer was used to measure ultrafine particle concentrations at a ticket/cash tollbooth.

Measurements of respirable dust and nanoparticle concentrations in a titanium dioxide pigment production factory.

This study compared respirable dust and nanoparticle concentrations measured by different sampling devices at a titanium dioxide pigment factory. Respirable particle mass concentrations, nanoparticle concentrations, particle size distribution and particle metallic content were measured at different sampling locations. The sampling results of the Multi-orifice Uniform Deposit Impactor (MOUDI) showed that the particle size distribution at this titanium dioxide production factory fell in the range of 1-10 mu m.

Copper loaded on sol-gel-derived alumina adsorbents for phosphine removal.

The hydride gas of phosphine (PH3) is commonly used for semiconductor and optoelectronic industries. The local scrubbers must immediately abate it because of its high toxicity. In this study, copper (Cu) loaded on the sol-gel-derived gamma-alumina (Al2O3) adsorbents are prepared and tested to investigate the possibility of PH3 removal and sorbent regeneration.

Measurements of ultrafine particle concentrations and size distribution in an iron foundry.

The number and surface area concentration of ultrafine particles in an iron foundry is of interest as freshly generated ultrafine particles are produced by metal melting, pouring and molding processes. This study measured the number and surface area concentrations of ultrafine particles and their size distributions in an iron foundry using a scanning mobility particle sizer (SMPS). The 10-100 nm ultrafine particle number concentrations (NC(0.

Study of an axial flow cyclone to remove nanoparticles in vacuum.

An axial flow cyclone for removing nanoparticles was tested for collection efficiency. Data were validated numerically in vacuum conditions of several Torrs, with flow rates of 0.35-0.

Silane removal at ambient temperature by using alumina-supported metal oxide adsorbents.

Copper, zinc, and cerium oxide adsorbents supported on alumina were used to remove silane gas (SiH4). The adsorbents were prepared using a coprecipitation method and characterized by the inductively coupled plasma mass spectrometry, X-ray powder diffractometer, and Brunauer-Emmett-Teller method (BET). The silane removal efficiency and adsorption capacity of the adsorbents were investigated in this study.

Direct field observation of the relative humidity effect on the beta-gauge readings.

The effect of ambient relative humidity (RH) on hourly particulate matter (PM10) readings of beta-gauge monitors has been studied using two collocated monitors in the field. The inlet air of monitor 1 was conditioned with water vapor to increase its RH, whereas monitor 2 operated normally in ambient conditions. Experimental data showed that PM10 readings of monitor 1 were nearly the same as monitor 2, as long as the RH of its conditioned incoming air did not exceed approximately 80-85%.

Measurement of 2,4-toluene diisocyanate concentrations by different samplers.

The standard sampling methods for toluene diisocyanate (TDI) only collect total TDI without separating the aerosol and gas phases. There are few other samplers, such as the dual filter, triple filter and annular denuder systems (ADS), which are able to sample the aerosol and gas phases simultaneously. This field study was conducted at two workplaces to access the total 2,4-TDI and the gaseous and aerosol TDI concentrations by different samplers simultaneously.

Exposure assessment of organic solvents for aircraft paint stripping and spraying workers.

The main objective of this study is to investigate the personal or area exposure of organic solvents during paint stripping and paint spraying. Three aircraft paint stripping/spraying workplaces in Taiwan were selected, and the Council of Labor Affairs and NIOSH recommended sampling/analytical methods used in this study. Activated charcoal tubes were used to investigate the personal and area exposure concentration of organic solvents in paint stripping and paint spraying operations.

An efficient venturi scrubber system to remove submicron particles in exhaust gas.

An efficient venturi scrubber system making use of heterogeneous nucleation and condensational growth of particles was designed and tested to remove fine particles from the exhaust of a local scrubber where residual SiH4 gas was abated and lots of fine SiO2 particles were generated. In front of the venturi scrubber, normal-temperature fine-water mist mixes with high-temperature exhaust gas to cool it to the saturation temperature, allowing submicron particles to grow into micron sizes. The grown particles are then scrubbed efficiently in the venturi scrubber.

Axial flow cyclone for segregation and collection of ultrafine particles: theoretical and experimental study.

In this study, an axial flow cyclone was designed, fabricated, and evaluated at different conditions of air flow rates (Q0) and low-pressure environments (P), especially for the segregation and collection of ultrafine particles. An evaporation/condensation type of aerosol generation system consisting of tube furnace and mixing chamber was employed to produce test aerosols. The test aerosol was then classified by a differential mobility analyzer (DMA) and number concentration was measured by a condensation nuclei counter (CNC) and an electrometer upstream and downstream of the cyclone, respectively.