Electrochemical Control of the Ultrafast Lattice Response of a Layered Semimetal.

The unique layer-stacking in two-dimensional (2D) van der Waals materials facilitates the formation of nearly degenerate phases of matter and opens novel routes for the design of low-power, reconfigurable functional materials. Electrochemical ion intercalation between stacked layers offers a promising approach to stabilize bulk metastable phases and to explore the effects of extreme carrier doping and strain. However, in situ characterization methods to study the structural evolution and dynamical functional properties of these intercalated materials remains limited.

Substantial oxygen loss and chemical expansion in lithium-rich layered oxides at moderate delithiation.

Delithiation of layered oxide electrodes triggers irreversible oxygen loss, one of the primary degradation modes in lithium-ion batteries. However, the delithiation-dependent mechanisms of oxygen loss remain poorly understood. Here we investigate the oxygen non-stoichiometry in LiNiMnCoO electrodes as a function of Li content by using cycling protocols with long open-circuit voltage steps at varying states of charge.

Giant Terahertz Birefringence in an Ultrathin Anisotropic Semimetal.

Manipulating the polarization of light at the nanoscale is key to the development of next-generation optoelectronic devices. This is typically done via waveplates using optically anisotropic crystals, with thicknesses on the order of the wavelength. Here, using a novel ultrafast electron-beam-based technique sensitive to transient near fields at THz frequencies, we observe a giant anisotropy in the linear optical response in the semimetal WTe and demonstrate that one can tune the THz polarization using a 50 nm thick film, acting as a broadband wave plate with thickness 3 orders of magnitude smaller than the wavelength.

Beyond Constant Current: Origin of Pulse-Induced Activation in Phase-Transforming Battery Electrodes.

Mechanistic understanding of phase transformation dynamics during battery charging and discharging is crucial toward rationally improving intercalation electrodes. Most studies focus on constant-current conditions. However, in real battery operation, such as in electric vehicles during discharge, the current is rarely constant.

Multiscale Analysis of Electrocatalytic Particle Activities: Linking Nanoscale Measurements and Ensemble Behavior.

Nanostructured electrocatalysts exhibit variations in electrochemical properties across different length scales, and the intrinsic catalytic characteristics measured at the nanoscale often differ from those at the macro-level due to complexity in electrode structure and/or composition. This aspect of electrocatalysis is addressed herein, where the oxygen evolution reaction (OER) activity of β-Co(OH) platelet particles of well-defined structure is investigated in alkaline media using multiscale scanning electrochemical cell microscopy (SECCM). Microscale SECCM probes of ∼50 μm diameter provide voltammograms from (ca.

Synergistic effects of mixing and strain in high entropy spinel oxides for oxygen evolution reaction.

Developing stable and efficient electrocatalysts is vital for boosting oxygen evolution reaction (OER) rates in sustainable hydrogen production. High-entropy oxides (HEOs) consist of five or more metal cations, providing opportunities to tune their catalytic properties toward high OER efficiency. This work combines theoretical and experimental studies to scrutinize the OER activity and stability for spinel-type HEOs.

Learning heterogeneous reaction kinetics from X-ray videos pixel by pixel.

Reaction rates at spatially heterogeneous, unstable interfaces are notoriously difficult to quantify, yet are essential in engineering many chemical systems, such as batteries and electrocatalysts. Experimental characterizations of such materials by operando microscopy produce rich image datasets, but data-driven methods to learn physics from these images are still lacking because of the complex coupling of reaction kinetics, surface chemistry and phase separation. Here we show that heterogeneous reaction kinetics can be learned from in situ scanning transmission X-ray microscopy (STXM) images of carbon-coated lithium iron phosphate (LFP) nanoparticles.

Large Decrease in the Melting Point of Benzoquinones via High- Eutectic Mixing Predicted by a Regular Solution Model.

Decreasing the melting point () of a mixture is of interest in cryopreservatives, molten salts, and battery electrolytes. One general strategy to decrease , exemplified by deep eutectic solvents, is to mix components with favorable (negative) enthalpic interactions. We demonstrate a complementary strategy to decrease by mixing many components with neutral or slightly positive enthalpic interactions, using the number of components () to increase the entropy of mixing and decrease .

Selectivity of Electrochemical Ion Insertion into Manganese Dioxide Polymorphs.

The ion insertion redox chemistry of manganese dioxide has diverse applications in energy storage, catalysis, and chemical separations. Unique properties derive from the assembly of Mn-O octahedra into polymorphic structures that can host protons and nonprotonic cations in interstitial sites. Despite many reports on individual ion-polymorph couples, much less is known about the selectivity of electrochemical ion insertion in MnO.

Electro-chemo-mechanical charge carrier equilibrium at interfaces.

Electrochemical interfaces involving solids enable charge transfer, electrical transport, and mass storage in energy devices. One central concept that determines the interfacial charge carrier concentration is the space-charge field. The classical theory accounts for electrochemical equilibrium in the absence of mechanical effects; such effects have recently been found critical in many solids, such as materials for lithium-ion and solid-state batteries, perovskite solar cells, and fuel cells.

Universal phase dynamics in VO switches revealed by ultrafast operando diffraction.

Understanding the pathways and time scales underlying electrically driven insulator-metal transitions is crucial for uncovering the fundamental limits of device operation. Using stroboscopic electron diffraction, we perform synchronized time-resolved measurements of atomic motions and electronic transport in operating vanadium dioxide (VO) switches. We discover an electrically triggered, isostructural state that forms transiently on microsecond time scales, which is shown by phase-field simulations to be stabilized by local heterogeneities and interfacial interactions between the equilibrium phases.

Time-resolved ARPES Determination of a Quasi-Particle Band Gap and Hot Electron Dynamics in Monolayer MoS.

The electronic structure and dynamics of 2D transition metal dichalcogenide (TMD) monolayers provide important underpinnings both for understanding the many-body physics of electronic quasi-particles and for applications in advanced optoelectronic devices. However, extensive experimental investigations of semiconducting monolayer TMDs have yielded inconsistent results for a key parameter, the quasi-particle band gap (QBG), even for measurements carried out on the same layer and substrate combination. Here, we employ sensitive time- and angle-resolved photoelectron spectroscopy (trARPES) for a high-quality large-area MoS monolayer to capture its momentum-resolved equilibrium and excited-state electronic structure in the weak-excitation limit.

Highly Efficient Uniaxial In-Plane Stretching of a 2D Material via Ion Insertion.

On-chip dynamic strain engineering requires efficient micro-actuators that can generate large in-plane strains. Inorganic electrochemical actuators are unique in that they are driven by low voltages (≈1 V) and produce considerable strains (≈1%). However, actuation speed and efficiency are limited by mass transport of ions.

Correlative operando microscopy of oxygen evolution electrocatalysts.

Transition metal (oxy)hydroxides are promising electrocatalysts for the oxygen evolution reaction. The properties of these materials evolve dynamically and heterogeneously with applied voltage through ion insertion redox reactions, converting materials that are inactive under open circuit conditions into active electrocatalysts during operation. The catalytic state is thus inherently far from equilibrium, which complicates its direct observation.

Fictitious phase separation in Li layered oxides driven by electro-autocatalysis.

Layered oxides widely used as lithium-ion battery electrodes are designed to be cycled under conditions that avoid phase transitions. Although the desired single-phase composition ranges are well established near equilibrium, operando diffraction studies on many-particle porous electrodes have suggested phase separation during delithiation. Notably, the separation is not always observed, and never during lithiation.

Tuning electrochemically driven surface transformation in atomically flat LaNiO thin films for enhanced water electrolysis.

Structure-activity relationships built on descriptors of bulk and bulk-terminated surfaces are the basis for the rational design of electrocatalysts. However, electrochemically driven surface transformations complicate the identification of such descriptors. Here we demonstrate how the as-prepared surface composition of (001)-terminated LaNiO epitaxial thin films dictates the surface transformation and the electrocatalytic activity for the oxygen evolution reaction.

Coulombically-stabilized oxygen hole polarons enable fully reversible oxygen redox.

Stabilizing high-valent redox couples and exotic electronic states necessitate an understanding of the stabilization mechanism. In oxides, whether they are being considered for energy storage or computing, highly oxidized oxide-anion species rehybridize to form short covalent bonds and are related to significant local structural distortions. In intercalation oxide electrodes for batteries, while such reorganization partially stabilizes oxygen redox, it also gives rise to substantial hysteresis.

The Role of Metal Substitution in Tuning Anion Redox in Sodium Metal Layered Oxides Revealed by X-Ray Spectroscopy and Theory.

We investigate high-valent oxygen redox in the positive Na-ion electrode P2-Na [Fe Mn ]O (NMF) where Fe is partially substituted with Cu (P2-Na [Mn Fe Cu ]O , NMFC) or Ni (P2-Na [Mn Fe Ni ]O , NMFN). From combined analysis of resonant inelastic X-ray scattering and X-ray near-edge structure with electrochemical voltage hysteresis and X-ray pair distribution function profiles, we correlate structural disorder with high-valent oxygen redox and its improvement by Ni or Cu substitution. Density of states calculations elaborate considerable anionic redox in NMF and NMFC without the widely accepted requirement of an A-O-A' local configuration in the pristine materials (where A=Na and A'=Li, Mg, vacancy, etc.