Advanced Bioresponsive Drug Delivery Systems for Promoting Diabetic Vascularized Bone Regeneration.

The treatment of bone defects in diabetes mellitus (DM) patients remains a major challenge since the diabetic microenvironments significantly impede bone regeneration. Many abnormal factors including hyperglycemia, elevated oxidative stress, increased inflammation, imbalanced osteoimmune, and impaired vascular system in the diabetic microenvironment will result in a high rate of impaired, delayed, or even nonhealing events of bone tissue. Stimuli-responsive biomaterials that can respond to endogenous biochemical signals have emerged as effective therapeutic systems to treat diabetic bone defects via the combination of microenvironmental regulation and enhanced osteogenic capacity.

A super soft thermoplastic biodegradable elastomer with high elasticity for arterial regeneration.

Elastomers with innovative performance will provide new opportunities for solving problems in soft tissue repair, such as arterial regeneration. Herein, we present a thermoplastic biodegradable elastomer (PPS) that differs from the rigid, low-elastic traditional ones. It shows super softness (0.

Meticulously engineered three-dimensional-printed scaffold with microarchitecture and controlled peptide release for enhanced bone regeneration.

The repair of large load-bearing bone defects requires superior mechanical strength, a feat that a single hydrogel scaffold cannot achieve. The objective is to seamlessly integrate optimal microarchitecture, mechanical robustness, vascularisation, and osteoinductive biological responses to effectively address these critical load-bearing bone defects. To confront this challenge, three-dimensional (3D) printing technology was employed to prepare a polycaprolactone (PCL)-based integrated scaffold.

Designing Microneedle Patch for Prophylaxis of Postoperative Atrial Fibrillation.

Postoperative atrial fibrillation (POAF) is a common complication following cardiac surgery, which often occurs within 30 postoperative days, especially peaking at 2-3 days. Antiarrhythmic medications such as amiodarone are recommended in clinical practice for the prophylaxis and treatment of POAF. However, conventional oral administration is hindered due to delayed drug action and high risks of systemic toxicity, and emerging localized delivery strategies suffer from a limited release duration (less than 30 days).

Multi-modal imaging for dynamic visualization of osteogenesis and implant degradation in 3D bioprinted scaffolds.

monitoring of bone regeneration enables timely diagnosis and intervention by acquiring vital biological parameters. However, an existing gap exists in the availability of effective methodologies for continuous and dynamic monitoring of the bone tissue regeneration process, encompassing the concurrent visualization of bone formation and implant degradation. Here, we present an integrated scaffold designed to facilitate real-time monitoring of both bone formation and implant degradation during the repair of bone defects.

Integrating Fluorescence and Magnetic Resonance Imaging in Biocompatible Scaffold for Real-Time Bone Repair Monitoring and Assessment.

In situ monitoring of bone tissue regeneration progression is critical for the development of bone tissue engineering scaffold. However, engineered scaffolds that can stimulate osteogenic progress and allow for non-invasive monitoring of in vivo bone regeneration simultaneously are rarely reported. Based on a hard-and-soft integration strategy, a multifunctional scaffold composed of 3D printed microfilaments and a hydrogel network containing simvastatin (SV), indocyanine green-loaded superamphiphiles, and aminated ultrasmall superparamagnetic iron oxide nanoparticles (USPIO-NH ) is fabricated.

NIR light-facilitated bone tissue engineering.

In the last decades, near-infrared (NIR) light has attracted considerable attention due to its unique properties and numerous potential applications in bioimaging and disease treatment. Bone tissue engineering for bone regeneration with the help of biomaterials is currently an effective means of treating bone defects. As a controlled light source with deeper tissue penetration, NIR light can provide real-time feedback of key information on bone regeneration in vivo utilizing fluorescence imaging and be used for bone disease treatment.

Engineering Biomimetic Microenvironment for Organoid.

Organoid is an emerging frontier technology in the field of life science, in which pluripotent stem cells or tissue-derived differentiated/progenitor cells form 3D structures according to their multi-directional differentiation potential and self-assembly ability. Nowadays, although various types of organoids are widely investigated, their construction is still complicated in operation, uncertain in yield, and poor in reproducibility for the structure and function of native organs. Constructing a biomimetic microenvironment for stem cell proliferation and differentiation in vitro is recognized as a key to driving this field.

Langmuir-Blodgett-Mediated Formation of Antibacterial Microneedles for Long-Term Transdermal Drug Delivery.

Microneedles (MNs) have become versatile platforms for minimally invasive transdermal drug delivery devices. However, there are concerns about MN-induced skin infections with long-term transdermal administration. Using the Langmuir-Blodgett (LB) technique, a simple method for depositing antibacterial nanoparticles of various shapes, sizes, and compositions onto MNs is developed.

Bifunctional Hydrogel-Integrated 3D Printed Scaffold for Repairing Infected Bone Defects.

The clinical treatment of infectious bone defects is difficult and time-consuming due to the coexistence of infection and bone defects, and the simultaneous control of infection and repair of bone defects is considered a promising therapy. In this study, a dual-drug delivery scaffold system was fabricated by the combination of a three-dimensional (3D) printed scaffold with hydrogel for infected bone defects repair. The 3D printed polycaprolactone scaffold was incorporated with biodegradable mesoporous silica nanoparticles containing the small molecular drug fingolimod (FTY720) to provide structural support and promote angiogenesis and osteogenesis.

Enhanced tissue infiltration and bone regeneration through spatiotemporal delivery of bioactive factors from polyelectrolytes modified biomimetic scaffold.

Efficient healing of bone defect is closely associated with the structured and functional characters of tissue engineered scaffolds. However, the development of bone implants with rapid tissue ingrowth and favorable osteoinductive properties remains a challenge. Herein, we fabricated polyelectrolytes modified-biomimetic scaffold with macroporous and nanofibrous structures as well as simultaneous delivery of BMP-2 protein and trace element strontium.

Flowerbed-Inspired Biomimetic Scaffold with Rapid Internal Tissue Infiltration and Vascularization Capacity for Bone Repair.

The favorable microstructure and bioactivity of tissue-engineered bone scaffolds are closely associated with the regenerative efficacy of bone defects. For the treatment of large bone defects, however, most of them fail to meet requirements such as adequate mechanical strength, highly porous structure, and excellent angiogenic and osteogenic activities. Herein, inspired by the characteristics of a "flowerbed", we construct a short nanofiber aggregates-enriched dual-factor delivery scaffold 3D printing and electrospinning techniques for guiding vascularized bone regeneration.

Tunable metacrylated silk fibroin-based hybrid bioinks for the bioprinting of tissue engineering scaffolds.

Three-dimensional (3D) bioprinting is a powerful technique for the production of tissue-like structures to study cell behavior and tissue properties. A major challenge in 3D extrusion bioprinting is the limited diversity of bioinks, which fulfills the requirements of shear-thinning and strain recovery behaviors and can be solidified by a crosslinking process to retain their shape after printing. Herein, we aimed to develop a natural biopolymer-based formula with dual crosslinking performance to formulate a cell-laden bioink.

Three-dimensional bioprinted BMSCs-laden highly adhesive artificial periosteum containing gelatin-dopamine and graphene oxide nanosheets promoting bone defect repair.

The periosteum is a connective tissue membrane adhering to the surface of bone tissue that primarily provides nutrients and regulates osteogenesis during bone development and injury healing. However, building an artificial periosteum with good adhesion properties and satisfactory osteogenesis for bone defect repair remains a challenge, especially using three-dimensional (3D) bioprinting. In this study, dopamine was first grafted onto the molecular chain of gelatin using-(3-dimethylaminopropyl)-'-ethylcarbodiimide hydrochloride and-hydroxysuccinimide (NHS) to activate the carboxyl group and produce modified gelatin-dopamine (GelDA).

Rapid mineralization of graphene-based 3D porous scaffolds by semi-dry electrodeposition for photothermal treatment of tumor-induced bone defects.

Graphene-based three-dimensional (3D) porous scaffolds have been extensively investigated in the photothermal treatment of tumor-induced bone defects due to their photothermal and osteogenic capacity. However, scaffold processing destroys conjugated graphene structure and reduces its photothermal conversion efficiency. In this study, a graphene-based 3D scaffold (GS) with intact conjugated structure was prepared by chemical vapor deposition (CVD).

Vascularized nanocomposite hydrogel mechanically reinforced by polyelectrolyte-modified nanoparticles.

Vascularization plays an important role in the initial stage of triggering bone defect repair. The combination of bioactive small molecule drugs and biomaterials has been a powerful strategy for vascularization in bone tissue engineering. In this study, an crosslinked aldehyde hyaluronic acid (AHA)/,-carboxymethyl chitosan (NOCC) nanocomposite hydrogel doped with sphingosine 1-phosphate (S1P)-loaded polyelectrolyte-modified mesoporous silica nanoparticles (MSNs) was developed.

Inhibition of Sympathetic Activation by Delivering Calcium Channel Blockers from a 3D Printed Scaffold to Promote Bone Defect Repair.

Enhancing osteogenesis by promoting neural network reconstruction and neuropeptide release is considered to be an attractive strategy for repairing of critical size bone defects. However, traumatic bone defects often activate the damaged sympathetic nervous system (SNS) in the defect area and release excessive catecholamine to hinder bone defect repair. Herein, a 3D printed scaffold loaded with the calcium channel blocker-nifedipine is proposed to reduce the concentration of catecholamine present in the bone defect region and to accelerate bone healing.

3D bioprinted gelatin/gellan gum-based scaffold with double-crosslinking network for vascularized bone regeneration.

Three-dimensional (3D) bioprinting holds promise for precise repair of bone defects, but rapid formation of effective vascularized tissue by 3D-printed construct is still a challenge. In this study, deferoxamine (DFO)-loaded ethosomes (Eth) were combined with gelatin methacrylate (GelMA)/gellan gum methacrylate (GGMA) hybrid bioink to fabricate 3D-printed scaffold by photo- and ion-crosslinking. The GelMA/GGMA bioinks showed excellent printability and improved mechanical property through the double-crosslinking method.

Tumor cell membrane-camouflaged responsive nanoparticles enable MRI-guided immuno-chemodynamic therapy of orthotopic osteosarcoma.

Osteosarcoma is a refractory bone disease in young people that needs the updating and development of effective treatment. Although nanotechnology is widely applied in cancer therapy, poor targeting and inadequate efficiency hinder its development. In this study, we prepared alendronate (ALD)/K7M2 cell membranes-coated hollow manganese dioxide (HMnO) nanoparticles as a nanocarrier to load Ginsenoside Rh2 (Rh2) for Magnetic Resonance imaging (MRI)-guided immuno-chemodynamic combination osteosarcoma therapy.

Prodrug inspired bi-layered electrospun membrane with properties of enhanced tissue integration for guided tissue regeneration.

Guided tissue regeneration (GTR) membranes play a vital role in periodontal surgery. Recently a series of composite electrospun membranes have been fabricated to improve the unexpected biodegradation of collagen-based GTR membranes. However, their tissue integrity needs to be studied in depth.

Reactive Oxygen Species-Based Biomaterials for Regenerative Medicine and Tissue Engineering Applications.

Reactive oxygen species (ROS), acting as essential mediators in biological system, play important roles in the physiologic and pathologic processes, including cellular signal transductions and cell homeostasis interference. Aberrant expression of ROS in tissue microenvironment can be caused by the internal/external stimuli and tissue injury, which may leads to an elevated level of oxidative stress, inflammatory response, and cellular damage as well as disruption in the tissue repair process. To prevent the formation of excess ROS around the injury site, advanced biomaterials can be remodeled or instructed to release their payloads in an injury microenvironment-responsive fashion to regulate the elevated levels of the ROS, which may also help downregulate the oxidative stress and promote tissue regeneration.

Transcutaneous tumor vaccination combined with anti-programmed death-1 monoclonal antibody treatment produces a synergistic antitumor effect.

Transcutaneous immunization (TCI) has the advantages of safety, high efficiency, non-invasiveness and convenient use. The key for a TCI system is transdermal targeted delivery of antigen to dendritic cells (DCs), the most powerful antigen presenting cells. DCs also play an important role in tumor immunotherapy, which provides a huge imagination for the application of TCI to tumor treatment.

CoCrMo-Nanoparticles induced peri-implant osteolysis by promoting osteoblast ferroptosis via regulating Nrf2-ARE signalling pathway.

Objectives: Aseptic loosening (AL) is the most common reason of total hip arthroplasty (THA) failure and revision surgery. Osteolysis, caused by wear particles released from implant surfaces, has a vital role in AL. Although previous studies suggest that wear particles always lead to osteoblast programmed death in the process of AL, the specific mechanism remains incompletely understood and osteoblast ferroptosis maybe a new mechanism of AL.

Evaluation of a novel tilapia-skin acellular dermis matrix rationally processed for enhanced wound healing.

Acellular Dermal Matrix (ADM) is mainly made with human or porcine skins and has the risk of zoonotic virus transmission. The fish skin-derived ADM could overcome the shortcoming. Fish skin acellular matrix has been used as wound dressing, but there is few systematic studies on tilapia-skin acellular dermal matrix (TS-ADM).