Catch me if you can: free-living mice show a highly flexible dodging behaviour suggestive of intentional tactical deception.

Intentional tactical deception, the employment of a tactic to intentionally deceive another animal, is a complex behaviour based on higher-order cognition, that has rarely been documented outside of primates and corvids. New laboratory-to-field assays, however, provide the opportunity to investigate such behaviour among free-living mice. In the present study, we placed laboratory-style test chambers with a single entrance near a forest outside Warsaw, where we observed the social interactions of two territorial murids, black-striped and yellow-necked mice, under food competition for seven months.

Ultrasonic-Assisted Preparation of Biodiesel Products from Vegetable Oils.

Utilizing vegetable oil as a sustainable feedstock, this study presents an innovative approach to ultrasonic-assisted transesterification for biodiesel synthesis. This alkaline-catalyzed procedure harnesses ultrasound as a potent energy input, facilitating the rapid conversion of extra virgin olive oil into biodiesel. In this demonstration, the reaction is run in an ultrasonic bath under ambient conditions for 15 min, requiring a 1:6 molar ratio of extra virgin olive oil to methanol and a minimum amount of KOH as the catalyst.

The influence of solvent refractive index on the photoluminescence decay of thick-shell gradient-alloyed colloidal quantum dots investigated in a wide range of delay times.

Colloidal semiconductor quantum dots have many potential optical applications, including quantum dot light-emitting diodes, single-photon sources, or biological luminescent markers. The optical properties of colloidal quantum dots can be affected by their dielectric environment. This study investigated the photoluminescence (PL) decay of thick-shell gradient-alloyed colloidal semiconductor quantum dots as a function of solvent refractive index.

Thorough molecular configuration analysis of noncanonical AAV genomes in AAV vector preparations.

The unique palindromic inverted terminal repeats (ITRs) and single-stranded nature of adeno-associated virus (AAV) DNA are major hurdles to current sequencing technologies. Due to these characteristics, sequencing noncanonical AAV genomes present in AAV vector preparations remains challenging. To address this limitation, we developed thorough molecule configuration analysis of noncanonical AAV genomes (TMCA-AAV-seq).

A novel class of self-complementary AAV vectors with multiple advantages based on cceAAV lacking mutant ITR.

Self-complementary AAV vectors (scAAV) use a mutant inverted terminal repeat (mITR) for efficient packaging of complementary stranded DNA, enabling rapid transgene expression. However, inefficient resolution at the mITR leads to the packaging of monomeric or subgenomic AAV genomes. These noncanonical particles reduce transgene expression and may affect the safety of gene transfer.

Quantitative analysis of preferential utilization of AAV ITR as the packaging terminal signal.

Genetic engineering advances have led to recombinant adeno-associated virus (rAAV) becoming an invaluable tool for the development of effective gene therapies. The production of rAAV is susceptible to off-target heterogeneous packaging, the effects of which are still being understood. Here, rAAV vectors with four-genome lengths were produced using both adherent and suspension HEK293 cells to understand the 5'ITR termination.

Flexible Quantum-Dot Light-Emitting Diodes Using Embedded Silver Mesh Transparent Electrodes Manufactured by an Ultraprecise Deposition Method.

Transparent conductive electrodes (TCEs) fabricated onto flexible substrates are crucial parts of organic-light-emitting diodes (OLEDs), which are vastly utilized for display and lightning applications. Indium tin oxide (ITO), which is so far the most popular material for transparent and conductive electrodes, is found to be an unsuitable candidate for flexible devices mostly due to its brittleness. Here, we present a novel approach for the fabrication of transparent, conductive, and flexible electrodes for optoelectronic applications made of silver metal mesh by an ultraprecise deposition (UPD) method.

Chemical modification of AAV9 capsid with N-ethyl maleimide alters vector tissue tropism.

Although more adeno-associated virus AAV-based drugs enter the clinic, vector tissue tropism remains an unresolved challenge that limits its full potential despite that the tissue tropism of naturally occurring AAV serotypes can be altered by genetic engineering capsid vie DNA shuffling, or molecular evolution. To further expand the tropism and thus potential applications of AAV vectors, we utilized an alternative approach that employs chemical modifications to covalently link small molecules to reactive exposed Lysine residues of AAV capsids. We demonstrated that AAV9 capsid modified with N-ethyl Maleimide (NEM) increased its tropism more towards murine bone marrow (osteoblast lineage) while decreased transduction of liver tissue compared to the unmodified capsid.

Cryptic resolution sites in the vector plasmid lead to the heterogeneities in the rAAV vectors.

Recombinant adeno-associated virus (rAAV) vectors carry a cassette of interest retaining only the inverted terminal repeats (ITRs) from the wild-type virus. Conventional rAAV production primarily uses a vector plasmid as well as helper genes essential for AAV replication and packaging. Nevertheless, plasmid backbone related contaminants have been a major source of vector heterogeneity.

Subgenomic particles in rAAV vectors result from DNA lesion/break and non-homologous end joining of vector genomes.

Recombinant adeno-associated virus (rAAV) vectors have been developed for therapeutic treatment of genetic diseases. Current rAAV vectors administered to affected individuals often contain vector DNA-related contaminants. Here we present a thorough molecular analysis of the configuration of non-standard AAV genomes generated during rAAV production using single-molecule sequencing.

Molecular Oscillator Affects Susceptibility of Caterpillars to Insecticides: Studies on the Egyptian Cotton Leaf Worm- (Lepidoptera: Noctuidae).

The molecular oscillator is the core of the biological clock and is formed by genes and proteins whose cyclic expression is regulated in the transcriptional-translational feedback loops (TTFLs). Proteins of the TTFLs are regulators of both their own and executive genes involved in the control of many processes in insects (e.g.

Effect of Air Exposure of ZnMgO Nanoparticle Electron Transport Layer on Efficiency of Quantum-Dot Light-Emitting Diodes.

We demonstrate the effect of air exposure on optical and electrical properties of ZnMgO nanoparticles (NPs) typically exploited as an electron transport layer in Cd-based quantum-dot light-emitting diodes (QLEDs). We analyze the roles of air components in modifying the electrical properties of ZnMgO NPs, which reveals that HO enables the reduction of hole leakage while O alters the character of charge transport due to its ability to trap electrons. As a result, the charge balance in the QDs layer is improved, which is confirmed by voltage-dependent measurements of photoluminescence quantum yield.

Effects of Thermally Induced Configuration Changes on rAAV Genome's Enzymatic Accessibility.

Physical titers for recombinant adeno-associated viral (rAAV) vectors are measured by quantifying viral genomes. It is generally perceived that AAV virions disassemble and release DNA upon thermal treatment. Here, we present data on enzymatic accessibility of rAAV genomes when AAV virions were subjected to thermal treatment.

Quantum-dot light-emitting diode with ultrathin Au electrode embedded in solution-processed phosphomolybdic acid.

We proposed to exploit phosphomolybdic acid (PMA) as a cost-efficient MoO source for combined spin-coating/sputtering/spin-coating deposition of a MoO /Au/MoO (MAM) composite electrode. The bottom PMA layer provides perfect wetting conditions for ultrathin Au film sputtering and prevents the formation of gold islands on the glass surface, while the top PMA layer helps to reduce light reflection. By optimizing the thickness of ultrathin Au films and PMA layers, we achieved maximum transmittance of 79% at 550 nm and a sheet resistance of only 22 Ω sq which is comparable to the resistance of ITO substrates (20 Ω sq).

Stable composite of bacterial nanocellulose and perforated polypropylene mesh for biomedical applications.

The article presents the method of preparation of new, stable bacterial cellulose composites with perforated solid materials for biomedical applications, comprising reconstructive surgery of soft and hard tissues. The composites were obtained in specially designed bioreactors equipped with a set of perforated mesh stripes threaded vertically to the culture medium, ensuring perpendicular growth of bacterial nanocellulose synthesized by Komagataeibacter xylinus E in stationary culture. The developed biocomposites have been tested for stability and mechanical strength, as well as for their in vitro inflammatory responses shown as mast cell degranulation with N-acetyl-β-d-hexosaminidase release and mast cell adhesion.

Enhanced photoluminescence stability of CdS nanocrystals through a zinc acetate reagent.

In this study, the role of a zinc acetate precursor in improving the luminescence stability of purple-emitting CdS nanocrystals is investigated. The oleate-capped core of CdS nanocrystals exhibits intense photodarkening under prolonged UV excitation. From the results of photoluminescence experiments, we can observe that photobleaching is responsible for the degradation of temporal stability, , decline in photoluminescence intensity.

Research on a Nonwoven Fabric Made from Multi-Block Biodegradable Copolymer Based on l-Lactide, Glycolide, and Trimethylene Carbonate with Shape Memory.

The presented paper concerns scientific research on processing a poly(lactide--glycolide--trimethylene carbonate) copolymer (PLLAGLTMC) with thermally induced shape memory and a transition temperature around human body temperature. The material in the literature called terpolymer was used to produce smart, nonwoven fabric with the melt blowing technique. Bioresorbable and biocompatible terpolymers with shape memory have been investigated for its medical applications, such as cardiovascular stents.

Investigation of the Influence of PLA Molecular Structure on the Crystalline Forms (α' and α) and Mechanical Properties of Wet Spinning Fibres.

In this paper, the influence of the molecular structure of polylactide (PLA)-characterised by its molar mass and content of d-lactide isomer-on the molecular ordering and α'⁻α form transition during fibre manufacturing by the wet spinning method is described. Fibres were studied by wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC). Additionally, the physical and mechanical properties of the fibres were determined.

Checklist of the Quill mites (Acariformes: Syringophilidae) of the World.

Mites of the family Syringophilidae (Acariformes: Cheyletoidea) are ectoparasites inhabiting the quills of various feather types in many groups of birds. Until now, 334 valid species and 60 genera of quill mites have been described and recorded from 482 bird species (95 families and 24 orders). Currently, the family is divided into 2 subfamilies: Syringophilinae Lavoipierre, 1953 with 260 species grouped in 49 genera, and Picobinae Johnston and Kethley, 1973 with 74 species grouped in 11 genera.

Creating extra pores in microporous carbon via a template strategy for a remarkable enhancement of ambient-pressure CO2 uptake.

In this work, we illustrate a template strategy to create extra pores in microporous carbon for enhancing ambient-pressure CO2 uptake, as exemplified in the context of carbonizing the silicon-containing POP, PPN-4, followed by removal of the silicon template. The resultant PPN-4/C600 demonstrates a remarkable enhancement of CO2 uptake capacity at 295 K and 1 bar by a factor of 2.3 compared to the parent PPN-4.

Metal-organic framework based upon the synergy of a Brønsted acid framework and Lewis acid centers as a highly efficient heterogeneous catalyst for fixed-bed reactions.

We report a strategy of combining a Brønsted acid metal-organic framework (MOF) with Lewis acid centers to afford a Lewis acid@Brønsted acid MOF with high catalytic activity, as exemplified in the context of MIL-101-Cr-SO3H·Al(III). Because of the synergy between the Brønsted acid framework and the Al(III) Lewis acid centers, MIL-101-Cr-SO3H·Al(III) demonstrates excellent catalytic performance in a series of fixed-bed reactions, outperforming two benchmark zeolite catalysts (H-Beta and HMOR). Our work therefore not only provides a new approach to achieve high catalytic activity in MOFs but also paves a way to develop MOFs as a new type of highly efficient heterogeneous catalysts for fixed-bed reactions.