Experimental observation of near-wall effects during the puncture of soft solids.

Performing conventional mechanical characterization techniques on soft materials can be challenging due to issues such as limited sample volumes and clamping difficulties. Deep indentation and puncture is a promising alternative as it is an information-rich measurement with the potential to be performed in a high-throughput manner. Despite its promise, the method lacks standardized protocols, and open questions remain about its possible limitations.

Modular Synthesis and Patterning of High-Stiffness Networks by Postpolymerization Functionalization with Iron-Catechol Complexes.

Bioinspired iron-catechol cross-links have shown remarkable success in increasing the mechanical properties of polymer networks, in part due to clustering of Fe-catechol domains which act as secondary network reinforcing sites. We report a versatile synthetic procedure to prepare modular PEG-acrylate networks with independently tunable covalent bis(acrylate) and supramolecular Fe-catechol cross-linking. Initial control of network structure is achieved through radical polymerization and cross-linking, followed by postpolymerization incorporation of catechol units via quantitative active ester chemistry and subsequent complexation with iron salts.

ACUVRA: Anion-Exchange Chromatography UV-Ratio Analysis-A QC-Friendly Method for Monitoring Adeno-Associated Virus Empty Capsid Content To Support Process Development and GMP Release Testing.

The genome content of adeno-associated virus (AAV) vectors is critical to the safety and potency of AAV-based gene therapy products. Empty capsids are considered a product-related impurity and a critical quality attribute (CQA) of the drug product, thus requiring characterization throughout the production process to demonstrate they are controlled to acceptable levels in the final drug product. Anion exchange chromatography has been used to achieve separation between empty and full capsids, but requires method development and gradient optimization for different serotypes and formulations.

Bond strength regime dictates stress relaxation behavior.

Reconfigurable polymer networks are gaining interest for their potential applications as self-healing, recyclable, and stimuli-responsive smart materials. Relating the bond strength of dynamic interactions to material properties including stress relaxation time and modulus is crucial for smart material design. In this work, crosslinked transition metal-terpyridine reconfigurable networks were utilized to modulate the characteristic network stress relaxation time, .

Strength of fluid-filled soft composites across the elastofracture length.

Materials that utilize heterogeneous microstructures to control macroscopic mechanical response are ubiquitous in nature. Yet, translating nature's lessons to create synthetic soft solids has remained challenging. This is largely due to the limited synthetic routes available for creating soft composites, particularly with submicron features, as well as uncertainty surrounding the role of such a microstructured secondary phase in determining material behavior.

Linking cavitation and fracture to molecular scale structural damage of model networks.

Rapid expansion of soft solids subjected to a negative hydrostatic stress can occur through cavitation or fracture. Understanding how these two mechanisms relate to a material's molecular structure is important to applications in materials characterization, adhesive design, and tissue damage. Here, a recently improved needle-induced cavitation (NIC) protocol is applied to a set of model end-linked PEG gels with quantitatively linked elastic and fracture properties.

Rational mechanochemical design of Diels-Alder crosslinked biocompatible hydrogels with enhanced properties.

An important but often overlooked feature of Diels-Alder (DA) cycloadditions is the ability for DA adducts to undergo mechanically induced cycloreversion when placed under force. Herein, we demonstrate that the commonly employed DA cycloaddition between furan and maleimide to crosslink hydrogels results in slow gelation kinetics and "mechanolabile" crosslinks that relate to reduced material strength. Through rational computational design, "mechanoresistant" DA adducts were identified by constrained geometries simulate external force models and employed to enhance failure strength of crosslinked hydrogels.

Fracture of model end-linked networks.

Advances in polymer chemistry over the last decade have enabled the synthesis of molecularly precise polymer networks that exhibit homogeneous structure. These precise polymer gels create the opportunity to establish true multiscale, molecular to macroscopic, relationships that define their elastic and failure properties. In this work, a theory of network fracture that accounts for loop defects is developed by drawing on recent advances in network elasticity.

Deep indentation and puncture of a rigid cylinder inserted into a soft solid.

Deep indentation and puncture can be used to characterize the large strain elastic and fracture properties of soft solids and biological tissues. While this characterization method is growing in application there are still open questions about deep indentation and puncture, including how the distribution of strains and stresses in the surrounding material relate to the resultant force exerted on the indenter. Direct quantification of the deformation field around a rigid indenter during penetration of a soft solid is necessary to substantiate the current qualitative understanding of these strains and increase the impact and usefulness of puncture tests.

Seeded laser-induced cavitation for studying high-strain-rate irreversible deformation of soft materials.

Characterizing the high-strain-rate and high-strain mechanics of soft materials is critical to understanding the complex behavior of polymers and various dynamic injury mechanisms, including traumatic brain injury. However, their dynamic mechanical deformation under extreme conditions is technically difficult to quantify and often includes irreversible damage. To address such challenges, we investigate an experimental method, which allows quantification of the extreme mechanical properties of soft materials using ultrafast stroboscopic imaging of highly reproducible laser-induced cavitation events.

Low-Voltage Reversible Electroadhesion of Ionoelastomer Junctions.

Electroadhesion provides a simple route to rapidly and reversibly control adhesion using applied electric potentials, offering promise for a variety of applications including haptics and robotics. Current electroadhesives, however, suffer from key limitations associated with the use of high operating voltages (>kV) and corresponding failure due to dielectric breakdown. Here, a new type of electroadhesion based on heterojunctions between iono-elastomer of opposite polarity is demonstrated, which can be operated at potentials as low as ≈1 V.

Cavitation in soft matter.

Cavitation is the sudden, unstable expansion of a void or bubble within a liquid or solid subjected to a negative hydrostatic stress. Cavitation rheology is a field emerging from the development of a suite of materials characterization, damage quantification, and therapeutic techniques that exploit the physical principles of cavitation. Cavitation rheology is inherently complex and broad in scope with wide-ranging applications in the biology, chemistry, materials, and mechanics communities.

Residual strain effects in needle-induced cavitation.

Needle-induced cavitation (NIC) locally probes the elastic and fracture properties of soft materials, such as gels and biological tissues. Current NIC protocols tend to overestimate properties when compared to traditional techniques. New NIC methods are needed in order to address this issue.

Injections of Galanin-Like Peptide directly into the nucleus of the tractus solitarius (NTS) reduces food intake and body weight but increases metabolic rate and plasma leptin.

Galanin-Like Peptide (GALP) is a hypothalamic neuromediator of metabolism and reproduction. GALP is known to stimulate reproduction and alter food intake and body weight in multiple species. The regulation of body weight involves control of both energy intake and energy expenditure.

Intermittent heat exposure and thirst in rats.

Adequate water intake, supporting both cardiovascular function and evaporative cooling, is a critical factor in mitigating the effects of heat waves, which are expected to increase with global warming. However, the regulation of water intake during periods of intermittent heat exposure is not well understood. In this study, the effects of access to water or no access during intermittent heat exposure were assessed using male Sprague-Dawley rats exposed to 37.

Heat acclimation and thirst in rats.

The effects of heat acclimation on water intake and urine output responses to thermal dehydration and other thirst stimuli were studied in male Sprague-Dawley rats. Rats were heat acclimated by continuous exposure to a 34°C environment for at least 6 weeks. Thermal dehydration-induced thirst was brought about by exposing the heat-acclimated rats and control rats housed at 24°C to a 37.

Smooth Muscle Stiffness Sensitivity is Driven by Soluble and Insoluble ECM Chemistry.

Smooth muscle cell (SMC) invasion into plaques and subsequent proliferation is a major factor in the progression of atherosclerosis. During disease progression, SMCs experience major changes in their microenvironment, such as what integrin-binding sites are exposed, the portfolio of soluble factors available, and the elasticity and modulus of the surrounding vessel wall. We have developed a hydrogel biomaterial platform to examine the combined effect of these changes on SMC phenotype.

New insights into the mechanism for VACM-1/cul5 expression in vascular tissue in vivo.

Vasopressin-activated calcium-mobilizing (VACM-1)/cul5 is the least conserved member of a cullin protein family involved in the formation of E3-specific ligase complexes that are responsible for delivering the ubiquitin protein to their target substrate proteins selected for ubiquitin-dependent degradation. This chapter summarizes work to date that has focused on VACM-1/cul5's tissue-specific expression in vivo and on its potential role in the control of specific cellular signaling pathways in those structures. As mammalian cells may contain hundreds of E3 ligases, identification VACM-1/cul5 as a specific subunit of the system that is expressed in the endothelium and in collecting tubules, structures known for their control of cellular permeability, may have significant implications when designing studies to elucidate the mechanism of water conservation.

Aquaporin-2 levels in vitro and in vivo are regulated by VACM-1, a cul 5 gene.

Background: In the renal collecting duct, vasopressin regulates water permeability by a process that involves stimulation of adenylyl cyclase activity, cAMP production and subsequent translocation of water channel aquaporin-2 (AQP2) into the apical plasma membrane. We have previously shown that in cos 1 cells in vitro, both adenylyl cyclase activity and cAMP production can be regulated by VACM-1, a cul 5 gene that forms complexes involved in protein ubiquitination and subsequent degradation.

Methods: To extend these observations further, the effects of changes in hydration state on the expression of VACM-1 at the mRNA and the protein level were examined in rats deprived of water (WD) for 24 hrs.

VACM-1/cul5 expression in vascular tissue in vivo is induced by water deprivation and its expression in vitro regulates aquaporin-1 concentrations.

VACM-1, a cul5 gene product, when overexpressed in vitro, has an antiproliferative effect. In vivo, VACM-1/cul5 is present in tissues involved in the regulation of water balance. Neither proteins targeted for VACM-1/cul5-specific degradation nor factors that may regulate its expression in those tissues have been studied.

Developing a project-oriented introduction to neuroscience lab at hope college.

The Introduction to Neuroscience course at Hope College includes a three-hour laboratory period each week. Seven of the fifteen weeks of the lab are used for a lab project that is focused on understanding the effects of gonadal hormones on brain and behavior. Students perform ovariectomies and implant sham, estradiol, or testosterone capsules in rats and then carry out five experiments: 1) Sexual Behavior, 2) Spatial Learning using the Morris Water Maze, 3) The Size of the Sexually Dimorphic Nucleus, 4) Phosphorylation of NMDA Receptors, and 5) Long Term Potentiation in Hippocampal Slices.

Cultivation of an interdisciplinary, research-based neuroscience minor at hope college.

Hope College is an undergraduate liberal arts college with an enrollment of approximately 3,000 students. In the spring of 2005, we began to offer an interdisciplinary neuroscience minor program that is open to all students. The objective of this program is to introduce students to the field of neuroscience, and to do so in such a way as to broaden students' disciplinary perspectives, enhance communication and quantitative skills, and increase higher-level reasoning skills by encouraging collaboration among students who have different disciplinary backgrounds.

T47D breast cancer cell growth is inhibited by expression of VACM-1, a cul-5 gene.

Vasopressin-activated calcium-mobilizing (VACM-1), a cul-5 gene, is localized on chromosome 11q22-23 close to the gene for Ataxia Telangiectasia in a region associated with a loss of heterozygosity in breast cancer tumor samples. To examine the biological role of VACM-1, we studied the effect of VACM-1 expression on cellular growth and gene expression in T47D breast cancer cells. Immunocytochemistry studies demonstrated that VACM-1 was expressed in 0.

Thermal dehydration-induced thirst in lithium-treated rats.

Lithium is used as the primary treatment for bipolar disorder but has the common side effects of diuresis and thirst. In the present study, the effects of lithium on water balance responses of male Sprague-Dawley rats to thermal dehydration were examined. Rats ate either unadulterated food or food containing 2 g/kg lithium carbonate for 10 days.