Michelson Interferometer for Global High-Resolution Thermospheric Imaging (MIGHTI) On-Orbit Wind Observations: Data Analysis and Instrument Performance.

The design, principles of operation, calibration, and data analysis approaches of the Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) on the NASA Ionospheric Connection (ICON) satellite have been documented prior to the ICON launch. Here we update and expand on the MIGHTI wind data analysis and discuss the on-orbit instrument performance. In particular, we show typical raw data and we describe key processing steps, including the correction of a "signal-intensity dependent phase shift," which is necessitated by unexpected detector behavior.

Exospheric Temperature Measured by NASA-GOLD Under Low Solar Activity: Comparison With Other Data Sets.

Exospheric temperature is one of the key parameters in constructing thermospheric models and has been extensively studied with in situ observations and remote sensing. The Global-scale Observations of the Limb and Disk (GOLD) at a geosynchronous vantage point provides dayglow limb images for two longitude sectors, from which we can estimate the terrestrial exospheric temperature since 2018. In this paper, we investigate climatological behavior of the exospheric temperature measured by GOLD.

Comparison of ICON/MIGHTI and TIMED/TIDI Neutral Wind Measurements in the Lower Thermosphere.

This study cross-compares ICON/MIGHTI and Thermosphere, Ionosphere, Mesosphere Energetics & Dynamics (TIMED)/TIMED Doppler Interferometer (TIDI) MLT region neutral winds from middle Northern Hemisphere to low Southern Hemisphere latitudes. We utilized MIGHTI level-2.2 (v4) and TIDI level-3 (v11) neutral winds from January 2020 to November 2020 and found their conjunctions using a space-time window of LST ± 15 min, latitude ± 4°, and longitude ± 4° around each TIDI wind measurement.

Q2DW-Tide and -Ionosphere Interactions as Observed From ICON and Ground-Based Radars.

A quasi-2-day wave (Q2DW) event during January-February, 2020, is investigated in terms of its propagation from 96 to 250 km as a function of latitude (10°S to 30°N), its nonlinear interactions with migrating tides to produce 16 and 9.6-h secondary waves (SWs), and the plasma drift and density perturbations that it produces in the topside F-region (590-607 km) between magnetic latitudes 18°S and 18°N. This is accomplished through analysis of coincident Ionospheric Connections Explorer (ICON) measurements of neutral winds, plasma drifts and ion densities, and wind measurements from four low-latitude (±15°) specular meteor radars (SMRs).

Evaluation of Atmospheric 3-Day Waves as a Source of Day-to-Day Variation of the Ionospheric Longitudinal Structure.

We report for the first time the day-to-day variation of the longitudinal structure in height of the F layer (hF) in the equatorial ionosphere using multi-satellite observations of electron density profiles by the Constellation Observing System for Meteorology, Ionosphere and Climate-2 (COSMIC-2). These observations reveal a ~3-day modulation of the hF wavenumber-4 structure viewed in a fixed local time frame during January 30-February 14, 2021. Simultaneously, ~3-day planetary wave activity is discerned from zonal wind observations at ~100 km by the Ionospheric Connection Explorer (ICON) Michelson Interferometer for Global High-Resolution Thermospheric Imaging (MIGHTI).

First results from the retrieved column O/N ratio from the Ionospheric Connection Explorer (ICON): Evidence of the impacts of nonmigrating tides.

In near-Earth space, variations in thermospheric composition have important implications for thermosphere-ionosphere coupling. The ratio of O to N is often measured using far-UV airglow observations. Taking such airglow observations from space, looking below the Earth's limb allows for the total column of O and N in the ionosphere to be determined.

Atmosphere-Ionosphere (A-I) Coupling as Viewed by ICON: Day-to-Day Variability Due to Planetary Wave (PW)-Tide Interactions.

Coincident Ionospheric Connections Explorer (ICON) measurements of neutral winds, plasma drifts and total ion densities (:=Ne, electron density) are analyzed during January 1-21, 2020 to reveal the relationship between neutral winds and ionospheric variability on a day-to-day basis. Atmosphere-ionosphere (A-I) connectivity inevitably involves a spectrum of planetary waves (PWs), tides and secondary waves due to wave-wave nonlinear interactions. To provide a definitive attribution of dynamical origins, the current study focuses on a time interval when the longitudinal wave-4 component of the E-region winds is dominated by the eastward-propagating diurnal tide with zonal wavenumber = -3 (DE3).

Validation of ICON-MIGHTI Thermospheric Wind Observations: 2. Green-Line Comparisons to Specular Meteor Radars.

We compare coincident thermospheric neutral wind observations made by the Michelson Interferometer for Global High-Resolution Thermospheric Imaging (MIGHTI) on the Ionospheric Connection Explorer (ICON) spacecraft, and four ground-based specular meteor radars (SMRs). Using the green-line MIGHTI channel, we analyze 1158 coincidences between Dec 2019 and May 2020 in the altitude range from 94 to 104 km where the observations overlap. We find that the two datasets are strongly correlated ( = 0.

Validation of ICON-MIGHTI Thermospheric Wind Observations: 1. Nighttime Red-Line Ground-Based Fabry-Perot Interferometers.

Observations of the nighttime thermospheric wind from two ground-based Fabry-Perot Interferometers are compared to the level 2.1 and 2.2 data products from the Michelson Interferometer Global High-resolution Thermospheric Imaging (MIGHTI) onboard National Aeronautics and Space Administration's Ionospheric Connection Explorer to assess and validate the methodology used to generate measurements of neutral thermospheric winds observed by MIGHTI.

Errors From Asymmetric Emission Rate in Spaceborne, Limb Sounding Doppler Interferometry: A Correction Algorithm With Application to ICON/MIGHTI.

The Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) on NASA's Ionospheric Connection Explorer (ICON) mission is designed to measure the neutral wind and temperature between 90 and ∼300 km altitude. Using the Doppler Asymmetric Spatial Heterodyne (DASH) spectroscopy technique, observations from MIGHTI can be used to derive thermospheric winds by measuring Doppler shifts of the atomic oxygen red line (630.0 nm) and green line (557.

Determining the thermomechanical image shift for the MIGHTI instrument on the NASA-ICON satellite.

The Michelson Interferometer for Global High-Resolution Thermospheric Imaging (MIGHTI) instrument on NASA's Ionospheric Connection Explorer's mission will measure neutral winds in the Earth's thermosphere. We investigate how thermal changes to the instrument's optical bench affect the relative position of the image recorded by the camera. The thermal shift is measured by fitting the image of a series of reference notches and determining their current position on the camera with subpixel precision.

On the uncertainties in determining fringe phase in Doppler asymmetric spatial heterodyne spectroscopy.

The mean fringe phase measured by Doppler asymmetric spatial heterodyne spectroscopy is a direct measure of atmospheric wind. The uncertainty in measuring the mean phase is investigated and found to be accurately predicted by an analytic formula for moderate and high signal-to-noise ratios. At lower signal-to-noise ratios, numeric issues in the phase calculation result in non-Gaussian distributions of mean phase.

Calibration lamp design, characterization, and implementation for the Michelson Interferometer for Global High-Resolution Thermospheric Imaging instrument on the Ionospheric Connection satellite.

We describe the design and ground-based performance of the two-color calibration lamp for the Michelson Interferometer for Global High-Resolution Thermospheric Imaging (MIGHTI) instrument on the NASA Ionospheric Connection (ICON) satellite. The calibration lamp assembly contains radio frequency excited krypton and neon lamps, which generate emission lines at 557 and 630 nm, respectively, and which are used to monitor thermal drifts in the two MIGHTI Doppler asymmetric spatial heterodyne interferometers. The lamps are coupled to two mixed optical fiber bundles that deliver the calibration signals to the two MIGHTI optical units.

Retrieval of Lower Thermospheric Temperatures from O A Band Emission: The MIGHTI Experiment on ICON.

The Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) is a satellite experiment scheduled to launch on NASA's Ionospheric Connection Explorer (ICON) in 2017. MIGHTI is designed to measure horizontal neutral winds and neutral temperatures in the terrestrial thermosphere. Temperatures will be inferred by imaging the molecular oxygen Atmospheric band (A band) on the limb in the lower thermosphere.

Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI): Monolithic Interferometer Design and Test.

The design and laboratory tests of the interferometers for the Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) instrument which measures thermospheric wind and temperature for the NASA-sponsored Ionospheric Connection (ICON) Explorer mission are described. The monolithic interferometers use the Doppler Asymmetric Spatial Heterodyne (DASH) Spectroscopy technique for wind measurements and a multi-element photometer approach to measure thermospheric temperatures. The DASH technique and overall optical design of the MIGHTI instrument are described in an overview followed by details on the design, element fabrication, assembly, laboratory tests and thermal control of the interferometers that are the heart of MIGHTI.

The MIGHTI Wind Retrieval Algorithm: Description and Verification.

We present an algorithm to retrieve thermospheric wind profiles from measurements by the Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) instrument on NASA's Ionospheric Connection Explorer (ICON) mission. MIGHTI measures interferometric limb images of the green and red atomic oxygen emissions at 557.7 nm and 630.

Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI): Instrument Design and Calibration.

The Michelson Interferometer for Global High-resolution imaging of the Thermosphere and Ionosphere (MIGHTI) instrument was built for launch and operation on the NASA Ionospheric Connection Explorer (ICON) mission. The instrument was designed to measure thermospheric horizontal wind velocity profiles and thermospheric temperature in altitude regions between 90km and 300km, during day and night. For the wind measurements it uses two perpendicular fields of view pointed at the Earth's limb, observing the Doppler shift of the atomic oxygen red and green lines at 630.

High-efficiency echelle gratings for MIGHTI, the spatial heterodyne interferometers for the ICON mission.

Development of a new generation of low-groove density-blazed echelle gratings optimized for MIGHTI, a space-borne spatial heterodyne interferometer operating in the visible and near infrared is described. Special demands are placed on the wavefront accuracy, groove profile, and efficiency of these gratings. These demands required a new ruling for this application, with significant improvements over existing gratings.

Spatial heterodyne spectroscopy at the Naval Research Laboratory.

Spatial heterodyne spectroscopy (SHS) is based on traditional Michelson interferometry. However, instead of employing retro-reflectors in the interferometer arms, one or both of which are moving, it uses fixed, tilted diffraction gratings and an imaging detector to spatially sample the optical path differences. This concept allows high-resolution, high-throughput spectroscopy without moving interferometer parts, particularly suitable for problems that require compact, robust instrumentation.

Thermal sensitivity of DASH interferometers: the role of thermal effects during the calibration of an Echelle DASH interferometer.

The use of a Doppler asymmetric spatial heterodyne (DASH) interferometer with an Echelle grating provides the ability to simultaneously image the 558 and 630 nm emission lines (e.g., at grating orders of n=8 and n=7, respectively) of atomic oxygen in the thermosphere.

Initial ground-based thermospheric wind measurements using Doppler asymmetric spatial heterodyne spectroscopy (DASH).

We present the first thermospheric wind measurements using a Doppler Asymmetric Spatial Heterodyne (DASH) spectrometer and the oxygen red-line nightglow emission. The ground-based observations were made from Washington, DC and include simultaneous calibration measurements to track and correct instrument drifts. Even though the measurements were made under challenging thermal and light pollution conditions, they are of good quality with photon statistics uncertainties between about three and twenty-nine meters per second, depending on the nightglow intensity.

Design and laboratory tests of a Doppler Asymmetric Spatial Heterodyne (DASH) interferometer for upper atmospheric wind and temperature observations.

We describe the design, fabrication and laboratory tests of a Doppler Asymmetric Spatial Heterodyne (DASH) interferometer for upper atmospheric wind and temperature observations of the O[1D] 630 nm emission. The monolithic interferometer has no moving parts, a large étendue, relaxed fabrication and alignment tolerances and can measure multiple emission lines simultaneously. Laboratory measurements indicate that the design resolution and étendue were achieved and that thermal drifts can be determined with sufficient precision for geophysical applications.

Doppler asymmetric spatial heterodyne spectroscopy (DASH): concept and experimental demonstration.

We describe the concept of Doppler asymmetric spatial heterodyne spectroscopy (DASH) and present a laboratory Doppler-shift measurement using an infrared laser line. DASH is a modification of spatial heterodyne spectroscopy optimized for high precision, high accuracy Doppler-shift measurements of atmospheric emission lines either from the ground or a satellite. We discuss DASH design considerations, field widening, thermal stability and tracking, noise propagation, advantages, and trade-offs.