Hyaluronic acid and chondroitin sulfate (meth)acrylate-based hydrogels for tissue engineering: Synthesis, characteristics and pre-clinical evaluation.

Hydrogels based on photocrosslinkable Hyaluronic Acid Methacrylate (HAMA) and Chondroitin Sulfate Methacrylate (CSMA) are presently under investigation for tissue engineering applications. HAMA and CSMA gels offer tunable characteristics such as tailorable mechanical properties, swelling characteristics, and enzymatic degradability. This review gives an overview of the scientific literature published regarding the pre-clinical development of covalently crosslinked hydrogels that (partially) are based on HAMA and/or CSMA.

Protein release from water-swellable poly(D,L-lactide-PEG)-b-poly(ϵ-caprolactone) implants.

In this study, water-swellable multiblock copolymers composed of semi-crystalline poly(ϵ-caprolactone) [PCL] blocks and amorphous blocks consisting of poly(D,L-lactide) (PDLLA) and poly(ethylene glycol) (PEG) [PDLLA-PEG] were synthesized. The block ratio of these [PDLLA-PEG]-b-[PCL] multiblock copolymers was varied and the degradation of implants prepared of these polymers by hot melt extrusion (HME) was compared with implants prepared of [PCL-PEG]-b-[PCL], a copolymer which has been described previously (Stanković et al., 2014).

Tailored protein release from biodegradable poly(ε-caprolactone-PEG)-b-poly(ε-caprolactone) multiblock-copolymer implants.

In this study, the in vitro release of proteins from novel, biodegradable phase-separated poly(ε-caprolactone-PEG)-block-poly(ε-caprolactone), [PCL-PEG]-b-[PCL]) multiblock copolymers with different block ratios and with a low melting temperature (49-55°C) was studied. The effect of block ratio and PEG content of the polymers (i.e.

Low temperature extruded implants based on novel hydrophilic multiblock copolymer for long-term protein delivery.

Parenteral protein delivery requires preservation of the integrity of proteins and control over the release kinetics. In order to preserve the integrity, parenteral protein delivery formulations typically need to be processed at low temperatures. Therefore, we synthesized a novel low melting biodegradable hydrophilic multiblock copolymer composed of poly (ethylene glycol) and poly (ε-caprolactone) to allow extrusion at relatively low temperatures.

Probing DNA interstrand cross-link formation by an oxidized abasic site using nonnative nucleotides.

The C4'-oxidized abasic site (C4-AP) forms two types of interstrand cross-links with the adjacent nucleotides in DNA. Previous experiments revealed that dG does not react with the lesion and that formation of one type of cross-link is catalyzed by the opposing dA. iso-Guanosine·dC and 2-aminopurine·dT base pairs were used to determine why dG does not cross-link with C4-AP despite its well known reactivity with other bis-electrophiles.

A newly developed chemically crosslinked dextran-poly(ethylene glycol) hydrogel for cartilage tissue engineering.

Cartilage tissue engineering, in which chondrogenic cells are combined with a scaffold, is a cell-based approach to regenerate damaged cartilage. Various scaffold materials have been investigated, among which are hydrogels. Previously, we have developed dextran-based hydrogels that form under physiological conditions via a Michael-type addition reaction.

Release of model proteins and basic fibroblast growth factor from in situ forming degradable dextran hydrogels.

Our previous studies showed that degradable dextran hydrogels are rapidly formed in situ upon mixing aqueous solutions of dextran vinyl sulfone (dex-VS) conjugates and tetrafunctional mercapto poly(ethylene glycol) (PEG-4-SH) by Michael addition. The hydrogel degradation time and storage modulus could be controlled by the degree of vinyl sulfone substitution (DS) and dextran molecular weight. The degradation time could further be adjusted by the spacer between the thioether and the ester bond of the dex-VS conjugates (ethyl vs.

Rapidly in situ forming biodegradable robust hydrogels by combining stereocomplexation and photopolymerization.

Our previous studies have shown that stereocomplexed hydrogels can be rapidly formed in vitro as well as in vivo upon mixing aqueous solutions of eight-arm poly(ethylene glycol)-poly(l-lactide) (PEG-PLLA) and poly(ethylene glycol)-poly(d-lactide) (PEG-PDLA) star block copolymers. In this study, stereocomplexation and photopolymerization are combined to yield rapidly in situ forming robust hydrogels. Two types of methacrylate-functionalized PEG-PLLA and PEG-PDLA star block copolymers, PEG-PLLA-MA and PEG-PDLA-MA, which have methacrylate groups at the PLA chain ends and PEG-MA/PLLA and PEG-MA/PDLA, which have methacrylate groups at the PEG chain ends, were designed and prepared.

In vitro and in vivo protein delivery from in situ forming poly(ethylene glycol)-poly(lactide) hydrogels.

Previous studies have shown that stereocomplexed hydrogels are rapidly formed in situ by mixing aqueous solutions of eight-arm poly(ethylene glycol)-poly(L-lactide) and poly(ethylene glycol)-poly(D-lactide) star block copolymers (denoted as PEG-(PLLA)(8) and PEG-(PDLA)(8), respectively). In this study, in vitro and in vivo protein release from stereocomplexed hydrogels was investigated. These hydrogels were fully degradable under physiological conditions.

Rapidly in situ-forming degradable hydrogels from dextran thiols through Michael addition.

Thiol-functionalized dextrans (dex-SH) (M(n,dextran) = 14K or 31K) with degrees of substitution (DS) ranging from 12 to 25 were synthesized and investigated for in situ hydrogel formation via Michael type addition using poly(ethylene glycol) tetra-acrylate (PEG-4-Acr) or a dextran vinyl sulfone conjugate with DS 10 (dex-VS DS 10). Dex-SH was prepared by activation of the hydroxyl groups of dextran with 4-nitrophenyl chloroformate and subsequent reaction with cysteamine. Hydrogels were rapidly formed in situ under physiological conditions upon mixing aqueous solutions of dex-SH and either PEG-4-Acr or dex-VS DS 10 at polymer concentrations of 10 to 20 w/v%.

Enzyme-mediated fast in situ formation of hydrogels from dextran-tyramine conjugates.

Dextran hydrogels were formed in situ by enzymatic crosslinking of dextran-tyramine conjugates and their mechanical, swelling and degradation properties were evaluated. Two types of dextran-tyramine conjugates (M(n,dextran)=14k, M(w)/M(n)=1.45), i.

In-situ formation of biodegradable hydrogels by stereocomplexation of PEG-(PLLA)8 and PEG-(PDLA)8 star block copolymers.

Eight-arm poly(ethylene glycol)-poly(L-lactide), PEG-(PLLA)(8), and poly(ethylene glycol)-poly(D-lactide), PEG-(PDLA)(8), star block copolymers were synthesized by ring-opening polymerization of either L-lactide or D-lactide at room temperature in the presence of a single-site ethylzinc complex and 8-arm PEG (M(n) = 21.8 x 10(3) or 43.5 x 10(3)) as a catalyst and initiator, respectively.