Generation and Observation of Long-Lasting and Self-Sustaining Marangoni Flow.

When solute molecules in a liquid evaporate at the surface, concentration gradients can lead to surface tension gradients and provoke fluid convection at the interface, a phenomenon commonly known as the Marangoni effect. Here, we demonstrate that minute quantities of ethanol in concentrated sodium hydroxide solution can induce pronounced and long-lasting Marangoni flow upon evaporation at room temperature. By employing particle image velocimetry and gravimetric analysis, we show that the mean interfacial speed of the evaporating solution sensitively increases with the evaporation rate for ethanol concentrations lower than 0.

Does Water Enable Porosity in Aluminosilicate Zeolites? Porous Frameworks versus Dense Minerals.

Recently identified zeolite precursors consisting of concentrated, hyposolvated homogeneous alkalisilicate liquids, hydrated silicate ionic liquids (HSIL), minimize correlation of synthesis variables and enable one to isolate and examine the impact of complex parameters such as water content on zeolite crystallization. HSIL are highly concentrated, homogeneous liquids containing water as a reactant rather than bulk solvent. This simplifies elucidation of the role of water during zeolite synthesis.

Structural Aspects Affecting Phase Selection in Inorganic Zeolite Synthesis.

A guideline for zeolite phase selection in inorganic synthesis media is proposed, based on a systematic exploration of synthesis from inorganic media using liquid Na, K, and Cs aluminosilicate. Although the Si/Al ratio of the zeolites is a continuous function of the synthesis conditions, boundaries between topologies are sharp. The here-derived phase selection criterion relates the obtained zeolite topology to the Si/Al ratio imposed by the synthesis medium.

Hydrogen-Bonded Water-Aminium Assemblies for Synthesis of Zeotypes with Ordered Heteroatoms.

Water plays a central role in the crystallization of a variety of organic, inorganic, biological, and hybrid materials. This is also true for zeolites and zeolite-like materials, an important class of industrial catalysts and adsorbents. Water is always present during their hydrothermal synthesis, either with or without organic species as structure-directing agents.

Nucleation of Porous Crystals from Ion-Paired Prenucleation Clusters.

Current nucleation models propose manifold options for the formation of crystalline materials. Exploring and distinguishing between different crystallization pathways on the molecular level however remain a challenge, especially for complex porous materials. These usually consist of large unit cells with an ordered framework and pore components and often nucleate in complex, multiphasic synthesis media, restricting in-depth characterization.

Ion-Pairs in Aluminosilicate-Alkali Synthesis Liquids Determine the Aluminum Content and Topology of Crystallizing Zeolites.

Using hydrated silicate ionic liquids, phase selection and framework silicon-to-aluminum ratio during inorganic zeolite synthesis were studied as a function of batch composition. Consisting of homogeneous single phasic liquids, this synthesis concept allows careful control of crystallization parameters and evaluation of yield and sample homogeneity. Ternary phase diagrams were constructed for syntheses at 90 °C for 1 week.

HSIL-Based Synthesis of Ultracrystalline K,Na-JBW, a Zeolite Exhibiting Exceptional Framework Ordering and Flexibility.

A reproducible synthesis strategy for ultracrystalline K,Na-aluminosilicate JBW zeolite is reported. The synthesis uses a Na-based hydrated silicate ionic liquid (HSIL) as a silicon source and gibbsite as the aluminum source. Al and Na NMR spectra exhibit crystalline second-order quadrupole patterns in the hydrated as well as dehydrated states and distinct resonances for different T-sites demonstrating an exceptional degree of order of the elements of the JBW framework, observed for the first time in a zeolite.

How Water and Ion Mobility Affect the NMR Fingerprints of the Hydrated JBW Zeolite: A Combined Computational-Experimental Investigation.

An important aspect within zeolite synthesis is to make fully tunable framework materials with controlled aluminium distribution. A major challenge in characterising these zeolites at operating conditions is the presence of water. In this work, we investigate the effect of hydration on the Al NMR parameters of the ultracrystalline K,Na-compensated aluminosilicate JBW zeolite using experimental and computational techniques.

Super-ions of sodium cations with hydrated hydroxide anions: inorganic structure-directing agents in zeolite synthesis.

In inorganic zeolite formation, a direct correspondence between liquid state species in the synthesis and the supramolecular decoration of the pores in the as-made final zeolite has never been reported. In this paper, a direct link between the sodium speciation in the synthesis mixture and the pore structure and content of the final zeolite is demonstrated in the example of hydroxysodalite. Super-ions with 4 sodium cations bound by mono- and bihydrated hydroxide are identified as structure-directing agents for the formation of this zeolite.

Chlorination of a Zeolitic-Imidazolate Framework Tunes Packing and van der Waals Interaction of Carbon Dioxide for Optimized Adsorptive Separation.

Molecular separation of carbon dioxide (CO) and methane (CH) is of growing interest for biogas upgrading, carbon capture and utilization, methane synthesis and for purification of natural gas. Here, we report a new zeolitic-imidazolate framework (ZIF), coined COK-17, with exceptionally high affinity for the adsorption of CO by London dispersion forces, mediated by chlorine substituents of the imidazolate linkers. COK-17 is a new type of flexible zeolitic-imidazolate framework Zn(4,5-dichloroimidazolate) with the SOD framework topology.

Moving Electrode Impedance Spectroscopy for Accurate Conductivity Measurements of Corrosive Ionic Media.

A measurement cell for the use of accurate conductivity measurements of corrosive ionic media is presented. Based on the concept of moving electrode electrochemical impedance spectroscopy, exceptional measurement accuracy is achieved in a large conductivity range. Extensive testing with corrosive ionic media demonstrated the robust operation of the cell under harsh chemical conditions, up to temperatures of 130 °C.

A Porous POSiSil Suited for Pressure-Driven Reversible Confinement of Solutions: PSS-2.

Polyoligosiloxysilicone (POSiSil; designated PSS-2) is a copolymer of double four-ring (D4R) cyclosilicate and dimethylsiloxane. It is synthesized by linking D4R units in tetrabutylammonium cyclosilicate crystals with dimethyldichlorosilane. The structure of PSS-2 was revealed using solid state NMR spectroscopy.

Alumina: discriminative analysis using 3D correlation of solid-state NMR parameters.

Synthetic transition aluminas (χ, κ, θ, γ, δ, η, ρ) exhibit unique adsorptive and catalytic properties leading to numerous practical applications. Generated by thermal transformation of aluminium (oxy)hydroxides, structural differences between them arise from the variability of aluminium coordination numbers and degree of dehydroxylation. Unequivocal identification of these phases using X-ray diffraction has proven to be very difficult.

EU-7 zeolite: a synthetic BIK type zeolite with high hydrothermal stability.

EU-7 zeolite with Si/Al ratio of 15 is identified as a BIK type zeolite. The framework charge is compensated with Cs+ cations located in 8-ring channels at regular distances. Even partially exchanged, Cu-loaded EU-7 is active in NH3-SCR and withstands hydrothermal aging at 900 °C needed for application in diesel particulate filters.

Absolute Quantification of Water in Microporous Solids with H Magic Angle Spinning NMR and Standard Addition.

Zeolites are microporous materials driving industrial scale adsorption, ion exchange, and catalytic processes. Their water content dramatically impacts their properties, but its quantification with Karl Fisher titration or thermal gravimetric analysis is problematic. When standard addition of water is combined with H magic angle spinning (MAS) NMR detection, absolute quantification of water in microporous materials becomes possible.

Alternating Copolymer of Double Four Ring Silicate and Dimethyl Silicone Monomer-PSS-1.

A new copolymer consisting of double four ring (D4R) silicate units linked by dimethylsilicone monomer referred to as polyoligosiloxysilicone number one (PSS-1) was synthesized. The D4R building unit is provided by hexamethyleneimine cyclosilicate hydrate crystals, which were dehydrated and reacted with dichlorodimethylsilane. The local structure of D4R silicate units and dimethyl silicone monomers was revealed by multidimensional solid-state NMR, FTIR and modeling.

Hierarchical self-supported ZnAlEu LDH nanotubes hosting luminescent CdTe quantum dots.

Self-supported oligo-layered ZnAlEu LDH nanotubes (∅ 20 nm) self-assemble upon controlled hydrolysis of the metal ions (Zn, Al, Eu) in the presence of 1,3,5-benzenetricarboxylate anions and non-ionic worm-like micelles. Their high surface area and easily accessible cylindrical mesopores (175 m g; 0.75 cm g) facilitate interaction with 5 nm CdTe quantum dots, enhancing the overall luminescence behavior.

1D-2D-3D Transformation Synthesis of Hierarchical Metal-Organic Framework Adsorbent for Multicomponent Alkane Separation.

A new hierarchical MOF consisting of Cu(II) centers connected by benzene-tricarboxylates (BTC) is prepared by thermoinduced solid transformation of a dense CuBTC precursor phase. The mechanism of the material formation has been thoroughly elucidated and revealed a transformation of a ribbon-like 1D building unit into 2D layers and finally a 3D network. The new phase contains excess copper, charge compensated by systematic hydroxyl groups, which leads to an open microporous framework with tunable permanent mesoporosity.

Photoluminescence Blinking of Single-Crystal Methylammonium Lead Iodide Perovskite Nanorods Induced by Surface Traps.

Photoluminescence (PL) of organometal halide perovskite materials reflects the charge dynamics inside of the material and thus contains important information for understanding the electro-optical properties of the material. Interpretation of PL blinking of methylammonium lead iodide (MAPbI) nanostructures observed on polycrystalline samples remains puzzling owing to their intrinsic disordered nature. Here, we report a novel method for the synthesis of high-quality single-crystal MAPbI nanorods and demonstrate a single-crystal study on MAPbI PL blinking.

Zeolite Beta Formation from Clear Sols: Silicate Speciation, Particle Formation and Crystallization Monitored by Complementary Analysis Methods.

The formation of silicate nanoaggregates (NAs) at the very early stages of precursor sols and zeolite beta crystallization from silicate nanoparticles (NPs) are investigated in detail using a combination of different analysis methods, including liquid-state Si, Al, N, and H NMR spectroscopy, mass spectrometry (MS), small-angle X-ray scattering (SAXS), X-ray diffraction (XRD), and transmission electron microscopy at cryogenic temperatures (cryo-TEM). Prior to hydrothermal treatment, silicate NAs are observed if the Si/OH ratio in the reaction mixture is greater than 1. Condensation of oligomers within the NAs then generates NPs.

Intrusion-extrusion spring performance of -COK-14 zeolite enhanced by structural changes.

-COK-14 zeolite, the variant of COK-14 (OKO topology) with a systematically interrupted framework, exhibits unusual behaviour in high pressure intrusion-extrusion cycles of 20 M LiCl solution. After the first cycle with deviating behaviour and partially irreversible intrusion, subsequent cycles show stable reversible behaviour. The system behaves like a spring with unique progressive intrusion in the range of 10-120 MPa followed by enhanced uptake before saturation.

A Flexible Photoactive Titanium Metal-Organic Framework Based on a [Ti(IV)3(μ3-O)(O)2(COO)6] Cluster.

The synthesis of titanium-carboxylate metal-organic frameworks (MOFs) is hampered by the high reactivity of the commonly employed alkoxide precursors. Herein, we present an innovative approach to titanium-based MOFs by the use of titanocene dichloride to synthesize COK-69, the first breathing Ti MOF, which is built up from trans-1,4-cyclohexanedicarboxylate linkers and an unprecedented [Ti(IV)3(μ3-O)(O)2(COO)6] cluster. The photoactive properties of COK-69 were investigated in depth by proton-coupled electron-transfer experiments, which revealed that up to one Ti(IV) center per cluster can be photoreduced to Ti(III) while preserving the structural integrity of the framework.