Synthesis and characterization of different nano-hydroxyapatites and their impact on dental enamel following topical application for dental bleaching.

Objective: This study aims to synthesize, characterize, and assess the penetration of hydrogen peroxide (HP), color change (CC), and surface morphology changes after the application of two distinct nano-hydroxyapatite (nano-HAp).

Methods: Two nano-HAp were previously synthesized by co-precipitation: one with rod-shaped particles (RS) and the other with spherical-shaped particles (SS). The surface charge of the nano-HAp particles was determined at varying pH levels and characterized by X-ray diffraction patterns and Fourier transform infrared spectroscopy.

Whitening toothpastes with hydrogen peroxide concentrations vs. at-home bleaching.

Objectives: To evaluate the effect of whitening toothpastes with different hydrogen peroxide (HP) concentrations on HP permeability, color change, and physicochemical properties, compared to at-home bleaching treatment.

Materials And Methods: Forty-nine premolars were randomized into seven groups (n = 7): untreated (control); at-home bleaching with 10% carbamide peroxide gel (AH; 10% CP) with 14 and 28 applications of 180 min each (AH [14 × 180 min] and AH [28 × 180 min]); three whitening toothpastes (3% HP; 4% HP and 5% HP) and 10% CP brushed 28 times for 90 s each (TB [28 × 90 s]). HP permeability was measured using a UV-VIS spectrophotometer and color change by a digital spectrophotometer (ΔE, ΔE, and ΔWI).

At-home bleaching with carbamide peroxide with concentrations below 10%: bleaching efficacy and permeability in the pulp chamber.

Objectives: To evaluate the bleaching efficacy and permeability of hydrogen peroxide (HP) in the pulp chamber of human teeth bleached with lower concentrations of carbamide peroxide gel (4%, 5% and 7% CP).

Materials And Methods: Bleaching gels with lower concentrations were formulated and a commercial standard gel, 10% CP, was used as a reference. Fifty-six human premolars were randomly divided into four groups.

Effect of whitening toothpastes with different hydrogen peroxide concentrations: Penetration into the pulp chamber and color change.

Objectives: This study evaluated the efficacy of simulated brushing with toothpastes containing different concentrations of hydrogen peroxide (HP) in pulp chamber penetration and color change. Also, physical-chemical properties (concentration, pH and viscosity) were evaluated.

Methods: Forty-nine premolars were divided into seven groups (n = 7): untreated (control); whitening gel (White Class 6 %, 6 %BG) with one 90  min application (6 %BG 90  min) and 14 applications of 90  min (6 %BG 14×90 min); toothpastes (Colgate Luminous White Glow 3 %, 3 %TP; Crest 3D White Brilliance 4 %, 4 %TP; Colgate Optic White Pro-Series 5 %, 5 %TP) and 6 %BG toothbrushing for 14 applications of 90 s.

Low and high hydrogen peroxide concentrations of in-office dental bleaching associated with violet light: an in vitro study.

Objectives: This study aims to assess hydrogen peroxide (HP) penetration within the pulp chamber, color change (CC), physical-chemical properties, and temperature using in-office different concentration bleaching gels with or without violet light.

Materials And Methods: Fifty teeth were divided into five groups (n = 10) based on the HP concentration bleaching gels used (6% and 35%) and the used violet light (with or without). HP penetration within the pulp chamber was measured using UV-Vis.

Evaluation of hydrogen peroxide permeability, color change, and physical-chemical properties on the in-office dental bleaching with different mixing tip.

Objective: This study aims to assess hydrogen peroxide (HP) penetration into the pulp chamber, color change (CC), physical-chemical properties, and material wastage (MW) and material used (MU) in mixing tips when using in-office bleaching gels with two different mixing tips.

Materials And Methods: Forty teeth were divided into five groups (n = 8) based on the bleaching gels used (Pola Office +37.5% [PO+] and Whiteness HP Automixx Plus 35% [AM+]) and the mixing tip types (T-Mixer and Helical).

Can all highly concentrated in-office bleaching gels be used as a single-application?

Objective: This in vitro study aims to evaluate of hydrogen peroxide (HP) diffusion into the pulp chamber, bleaching efficacy (BE), and pH stability (pH) of single-application high concentrated in-office bleaching gels.

Materials And Methods: Eighty-eight healthy premolars were randomly into eleven groups (n = 8) according to the in-office dental bleaching: DSP White Clinic 35% calcium (DW), Nano White 35% (NW), Opalescence XTra Boost 40% (OB), Pola Office + 37.5% (PO), Potenza Bianco Pro SS 38% (PB), Total Blanc 35% (TB), Total Blanc One-Step 35% (TO), Whiteness Automixx 35% (WA), Whiteness Automixx Plus 35% (WP), and Whiteness HP Blue 35% (WB).

Use of an applicator brush with high concentration bleaching gels.

Objectives: To evaluate in vitro two high concentration self-mix bleaching gels (35% or 37.5%) with different application tips (with or without an applicator brush) during in-office bleaching.

Materials And Methods: Healthy premolars were randomly assigned to five groups (n = 8): no treatment; 35% HP without applicator brush, 35% HP with applicator brush, 37.

Effects of microabrasion association to at-home bleaching on hydrogen peroxide penetration and color change.

Purpose: This study aimed to quantify the penetration of hydrogen peroxide (HP) inside the pulp cavity and color change with two different concentrations of HP to at-home bleaching associated or not with enamel microabrasion (MA).

Methods: Forty healthy premolars were randomly divided in four groups (n = 10): only HP4%, MA + HP4%, only HP10%, MA + HP10%. The concentration (μg/ml) of HP was assessed using UV-Vis spectrophotometry.

Synthesis of zeolites from residual diatomite using a microwave-assisted hydrothermal method.

Population growth directly affects the industrial production sector, as well as the quantities of waste generated in this sector. Diatomite is a typical example of such industrial waste and is used for the filtration of various products. With the aim of increasing its value, the present study employs this residue, following its usage in beer filtration, as a silicon source for the synthesis of zeolites.

A novel carbamide peroxide polymeric nanoparticle bleaching gel: Color change and hydrogen peroxide penetration inside the pulp cavity.

Objective: This study evaluated the hydrogen peroxide (HP) penetration inside the pulp cavity and the color change of teeth submitted to the 15% carbamide peroxide (CP) nanoparticle bleaching gel at several application times.

Materials And Methods: Premolars were divided into nine groups (n = 6) according to 15% CP bleaching agents (nanoparticle and commercial) and to application times (15, 30, 45, and 60 minutes). A negative control was exposed to ultra-purified water.

Visible light activated magnetic photocatalysts for water treatment.

Environmental concerns have been raised regarding the intense contamination of water resources. Currently, numerous contaminants that reach water bodies are not efficiently removed by conventional water treatment methods. Therefore, there arises the need for development and optimization of efficient treatment methods for the removal of such recalcitrant contaminants.

Effect of Prior Application of Desensitizing Agent on the Teeth Submitted to In-Office Bleaching.

This study aimed to quantify the penetration of hydrogen peroxide, color change evaluation, surface morphology, and composition after application of desensitizing agents before in-office bleaching. Fifty premolars were sectioned, an acetate buffer was placed in the pulp chamber and divided into five groups (n=10). In the positive control group, only the in-office bleaching gel was used, and in the negative control group, no treatment was used.

The effect of stainable drinks followed by simulated brushing on the roughness and stainability of acrylic resins polymerized with different cycles.

Statement Of Problem: No information is available on roughness and stainability of acrylic resins polymerized by experimental microwave cycles after immersion in stainable liquids and simulated brushing.

Purpose: The purpose of this in vitro study was to evaluate the effect of stainable drinks and brushing on roughness and stainability of acrylic resins (Vipi Cril [CA] and Vipi Wave [MA]) polymerized with different cycles.

Material And Methods: CA and MA specimens (n=5; diameter, 20 mm; thickness, 3 mm) were made using 4 methods recommended by the manufacturer (water bath polymerization and microwave polymerization cycles) and experimental at 550 W or 650 W for 3 or 5 minutes (M550/3 and M650/5), respectively.

In-office bleaching with a commercial 40% hydrogen peroxide gel modified to have different pHs: Color change, surface morphology, and penetration of hydrogen peroxide into the pulp chamber.

Objective: In-office bleaching gels are usually marketed in different pHs. This study is aimed at evaluating the efficacy, enamel surface morphology and concentration of hydrogen peroxide (HP) in the pulp chamber of teeth bleached with 40% HP with different pHs.

Materials And Methods: Forty premolars were randomly divided according to bleaching gel pH: 5.

Influence of professional prophylaxis on reducing discoloration of different aesthetic restorative materials.

Objectives: Color match is one of the most important characteristics of aesthetic restorative materials. Integrity of the restoration and color stability throughout its functional duration are of paramount importance to ensure treatment longevity. These features, however, are not consistent among the different dental restorative materials.

Color stability of resins and nylon as denture base material in beverages.

Purpose: Staining of prosthodontic materials may result in patient dissatisfaction and additional expense for replacement. This study aimed to determine the color stability of two heat-cured denture base acrylic (Lucitone 550, Vipi Cril) and one nylon denture base resin (Transflex) after immersion in beverages.

Materials And Methods: Forty disks of each resin (20.