Experimental validation of a modeling framework for upconversion enhancement in 1D-photonic crystals.

Photonic structures can be designed to tailor luminescence properties of materials, which becomes particularly interesting for non-linear phenomena, such as photon upconversion. However, there is no adequate theoretical framework to optimize photonic structure designs for upconversion enhancement. Here, we present a comprehensive theoretical model describing photonic effects on upconversion and confirm the model's predictions by experimental realization of 1D-photonic upconverter devices with large statistics and parameter scans.

Signature of Short-Range van der Waals Forces Observed in Poisson Spot Diffraction with Indium Atoms.

The phase of de Broglie matter waves is a sensitive probe for small forces. In particular, the attractive van der Waals force experienced by polarizable atoms in the close vicinity of neutral surfaces is of importance in nanoscale systems. It results in a phase shift that can be observed in matter-wave diffraction experiments.

Graphene Field-Effect Transistors Employing Different Thin Oxide Films: A Comparative Study.

In this work, we report on a comparison among graphene field-effect transistors (GFETs) employing different dielectrics as gate layers to evaluate their microwave response. In particular, aluminum oxide (AlO), titanium oxide (TiO), and hafnium oxide (HfO) have been tested. GFETs have been fabricated on a single chip and a statistical analysis has been performed on a set of 24 devices for each type of oxide.

Effect of Low-Temperature AlO ALD Coating on Ni-Rich Layered Oxide Composite Cathode on the Long-Term Cycling Performance of Lithium-Ion Batteries.

Conformal coating of nm-thick AlO layers on electrode material is an effective strategy for improving the longevity of rechargeable batteries. However, solid understanding of how and why surface coatings work the way they do has yet to be established. In this article, we report on low-temperature atomic layer deposition (ALD) of AlO on practical, ready-to-use composite cathodes of NCM622 (60% Ni), a technologically important material for lithium-ion battery applications.

Anion Doping of Ferromagnetic Thin Films of LaSrMnO via Topochemical Fluorination.

Chemical doping via insertion of ions into the lattice of a host material is a key strategy to flexibly manipulate functionalities of materials. In this work, we present a novel case study on the topotactic insertion of fluoride ions into oxygen-deficient ferromagnetic thin films of LaSrMnO (LSMO) epitaxially grown onto single-crystal SrTiO₃ (STO) substrates. The effect of fluorination on the film structure, composition, and magnetic properties is compared with the case of oxygen-deficient and fully-oxidized LSMO films.

Synthesis of non-canonical branched-chain amino acids in Escherichia coli and approaches to avoid their incorporation into recombinant proteins.

In E. coli the non-canonical amino acids acids norvaline, norleucine, and β-methylnorleucine, which derive from an off-pathway of the branched-chain amino acid synthesis route are synthesized and incorporated into cellular and recombinant proteins. The synthesis of these amino acids is supported by a high flux of glucose through the glycolytic pathway in combination with a derepression of the enzymes of the branched chain amino acid pathway, for example, when leucine-rich proteins are produced.

Hybrid supercapacitors for reversible control of magnetism.

Electric field tuning of magnetism is one of the most intensely pursued research topics of recent times aiming at the development of new-generation low-power spintronics and microelectronics. However, a reversible magnetoelectric effect with an on/off ratio suitable for easy and precise device operation is yet to be achieved. Here we propose a novel route to robustly tune magnetism via the charging/discharging processes of hybrid supercapacitors, which involve electrostatic (electric-double-layer capacitance) and electrochemical (pseudocapacitance) doping.

Doping of nematic cyanobiphenyl liquid crystals with mesogen-hybridized magnetic nanoparticles.

Magnetic nanoparticles (MNPs) functionalized with (pro-)mesogenic ligands are implemented into a nematic liquid crystal (LC) and studied regarding both colloidal stability and magneto-optical behavior. In this study, the particle surface is specifically engineered to tune the MNP interactions with the LC host. For this purpose, four types of (pro-)mesogenic ligands (ML) are synthesized, which are composed of three structural parts, i.

Applying Capacitive Energy Storage for In Situ Manipulation of Magnetization in Ordered Mesoporous Perovskite-Type LSMO Thin Films.

Mesostructured nonsilicate materials, particularly mixed-metal oxides, are receiving much attention in recent years because of their potential for numerous applications. Via the polymer-templating method, perovskite-type lanthanum strontium manganese oxide (LaSrMnO, LSMO, with x ≈ 0.15 to 0.

Sub-50 nm Channel Vertical Field-Effect Transistors using Conventional Ink-Jet Printing.

A printed vertical field-effect transistor is demonstrated, which decouples critical device dimensions from printing resolution. A printed mesoporous semiconductor layer, sandwiched between vertically stacked drive electrodes, provides <50 nm channel lengths. A polymer-electrolyte-based gate insulator infiltrates the percolating pores of the mesoporous channel to accumulate charge carriers at every semiconductor domain, thereby, resulting in an unprecedented current density of MA cm .

Microwave synthesis of high-quality and uniform 4 nm ZnFeO nanocrystals for application in energy storage and nanomagnetics.

Magnetic nanocrystals with a narrow size distribution hold promise for many applications in different areas ranging from biomedicine to electronics and energy storage. Herein, the microwave-assisted sol-gel synthesis and thorough characterization of size-monodisperse zinc ferrite nanoparticles of spherical shape is reported. X-ray diffraction, Fe Mössbauer spectroscopy and X-ray photoelectron spectroscopy all show that the material is both chemically and phase-pure and adopts a partially inverted spinel structure with Fe ions residing on tetrahedral and octahedral sites according to (ZnFe)[ZnFe]O.

Hierarchical Carbon with High Nitrogen Doping Level: A Versatile Anode and Cathode Host Material for Long-Life Lithium-Ion and Lithium-Sulfur Batteries.

Nitrogen-rich carbon with both a turbostratic microstructure and meso/macroporosity was prepared by hard templating through pyrolysis of a tricyanomethanide-based ionic liquid in the voids of a silica monolith template. This multifunctional carbon not only is a promising anode candidate for long-life lithium-ion batteries but also shows favorable properties as anode and cathode host material owing to a high nitrogen content (>8% after carbonization at 900 °C). To demonstrate the latter, the hierarchical carbon was melt-infiltrated with sulfur as well as coated by atomic layer deposition (ALD) of anatase TiO2, both of which led to high-quality nanocomposites.

Introducing a large polar tetragonal distortion into Ba-doped BiFeO3 by low-temperature fluorination.

This article reports on the synthesis and crystallographic and magnetic structure of barium-doped BiFeO3 compounds with approximate composition Bi(1-x)Ba(x)FeO(3-x/2), as well as those of the fluorinated compounds Bi(1-x)Ba(x)FeO(3-x)F(x) (both with x = 0.2, 0.3), prepared by low-temperature fluorination of the oxide precursors using polyvinylidenedifluoride.

Morphology, microstructure, and magnetic properties of ordered large-pore mesoporous cadmium ferrite thin film spin glasses.

Herein, we report the synthesis, microstructure, and magnetic properties of cadmium ferrite (CdFe2O4) thin films with both an ordered cubic network of 18 nm diameter pores and single-phase spinel grains averaging 13 nm in diameter. These mesoporous materials were produced through facile polymer templating of hydrated nitrate salt precursors. Both the morphology and the microstructure, including cation site occupancy and electronic bonding configuration, were analyzed in detail by electron microscopy, grazing incidence small-angle X-ray scattering, Raman and X-ray photoelectron spectroscopy, and N2-physisorption.

Soft-templating synthesis of mesoporous magnetic CuFe2O4 thin films with ordered 3D honeycomb structure and partially inverted nanocrystalline spinel domains.

Combining sol-gel chemistry with polymer templating strategies enables production of CuFe(2)O(4) thin films with both an ordered cubic network of 17 nm diameter pores and tunable spinel domain sizes. These nanocrystalline materials contain only minor structural defects with λ = 0.85 ± 0.

Ordered mesoporous α-Fe2O3 (hematite) thin-film electrodes for application in high rate rechargeable lithium batteries.

Herein is reported the synthesis of ordered mesoporous α-Fe(2)O(3) thin films produced through coassembly strategies using a poly(ethylene-co-butylene)-block-poly(ethylene oxide) diblock copolymer as the structure-directing agent and hydrated ferric nitrate as the molecular precursor. The sol-gel derived α-Fe(2)O(3) materials are highly crystalline after removal of the organic template and the nanoscale porosity can be retained up to annealing temperatures of 600 °C. While this paper focuses on the characterization of these materials using various state-of-the-art techniques, including grazing-incidence small-angle X-ray scattering, time-of-flight secondary ion mass spectrometry, X-ray photoelectron spectroscopy, and UV-vis and Raman spectroscopy, the electrochemical properties are also examined and it is demonstrated that mesoporous α-Fe(2)O(3) thin-film electrodes not only exhibit enhanced lithium-ion storage capabilities compared to bulk materials but also show excellent cycling stabilities by suppressing the irreversible phase transformations that are observed in microcrystalline α-Fe(2)O(3).

Pseudocapacitive contributions to charge storage in highly ordered mesoporous group V transition metal oxides with iso-oriented layered nanocrystalline domains.

Amphiphilic block copolymers are very attractive as templates to produce inorganic architectures with nanoscale periodicity because of their ability to form soft superstructures and to interact with inorganic materials. In this paper, we report the synthesis and electrochemical properties of highly ordered mesoporous T-Nb(2)O(5), L-Ta(2)O(5), and TaNbO(5) solid solution thin films with iso-oriented layered nanocrystalline domains. These oxide materials were fabricated by coassembly of inorganic sol-gel reagents with a poly(ethylene-co-butylene)-b-poly(ethylene oxide) diblock copolymer, referred to as KLE.