Surface-Initiated PET-RAFT via the Z-Group Approach.

Surface-initiated reversible addition-fragmentation chain transfer (SI-RAFT) is a user-friendly and versatile approach for polymer brush engineering. For SI-RAFT, synthetic strategies follow either surface-anchoring of radical initiators (e.g.

On the Importance of Mental Health in STEM.

From homework to exams to proposal deadlines, STEM academia bears many stressors for students, faculty, and administrators. The increasing prevalence of burnout as an occupational phenomenon, along with anxiety, depression, and other mental illnesses in the STEM community is an alarming sign that help is needed. We describe common mental illnesses, identify risk factors, and outline symptoms.

Elucidating Interfacial Chain Conformation of Superhydrophilic Polymer Brushes by Vibrational Sum Frequency Generation Spectroscopy.

Surface-tethered macromolecules (polymer brushes) are a potent means to modify surfaces with stimuli-responsive properties while avoiding delamination problems. This vibrational sum frequency generation spectroscopy study describes how the conformation of hydrophilic polymer brushes changes in response to environmental conditions, that is, changes in humidity (in air) and upon exposure to liquid water. Three hydrophilic brushes were prepared on silicon oxide surfaces by surface-initiated reversible deactivation radical polymerization of cationic (quaternary ammonium), anionic (sulfonate), and zwitterionic (containing both) monomers.

Oxygen Tolerance in Surface-Initiated Reversible Deactivation Radical Polymerizations: Are Polymer Brushes Turning into Technology?

Over the past three decades, the development of reversible deactivation radical polymerizations (RDRP), and advancements toward more user-friendly and accessible experimental setups have opened the door for nonexperts to design complex macromolecules with well-defined properties. External mediation, improved tolerance to oxygen, and increased reaction volumes for higher synthetic output are some of the many noteworthy technical improvements. The development of RDRPs in solution was paralleled by their application on solid substrates to synthesize surface-grafted "polymer brushes" via surface-initiated RDRP (SI-RDRP).

Estimating Internal Stress of an Alteration Layer Formed on Corroded Boroaluminosilicate Glass through Spectroscopic Ellipsometry Analysis.

Aqueous corrosion of glass may result in the formation of an alteration layer in the glass surface of which chemical composition and network structure are different from those of the bulk glass. Since corrosion occurs far below the glass-transition temperature, the alteration layer cannot fully relax to the new structure with the lowest possible energy. Molecular dynamics simulations suggested that such a network will contain highly strained chemical bonds, which can be manifested as a stress in the alteration layer.

Preparation of Patterned and Multilayer Thin Films for Organic Electronics via Oxygen-Tolerant SI-PET-RAFT.

An oxygen-tolerant approach is described for preparing surface-tethered polymer films of organic semiconductors directly from electrode substrates using polymer brush photolithography. A photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) approach was used to prepare multiblock polymer architectures with the structures of multi-layer organic light-emitting diodes (OLEDs), including electron-transport, emissive, and hole-transport layers. The preparation of thermally activated delayed fluorescence (TADF) and thermally assisted fluorescence (TAF) trilayer OLED architectures are described.

Synthesis of Polymer Brushes Via SI-PET-RAFT for Photodynamic Inactivation of Bacteria.

Biofilms are a persistent issue in healthcare and industry. Once formed, the eradication of biofilms is challenging as the extracellular polymeric matrix provides protection against harsh environmental conditions and physically enhances resistance to antimicrobials. The fabrication of polymer brush coatings provides a versatile approach to modify the surface to resist the formation of biofilms.

Benchtop Preparation of Polymer Brushes by SI-PET-RAFT: The Effect of the Polymer Composition and Structure on Inhibition of a Biofilm.

We report a high-throughput method for producing surface-tethered polymeric brushes on glass substrates via surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer polymerization (SI-PET-RAFT). Due to its excellent oxygen tolerance, SI-PET-RAFT allows brush growth using low reagent volumes (30 μL) without prior degassing. An initial 28 homopolymer brush library was successfully prepared and screened with respect to their antifouling performance.

Comparison of Long-Term Stability of Initiating Monolayers in Surface-Initiated Controlled Radical Polymerizations.

The reproducibility of polymer brush synthesis via surface-initiated controlled radical polymerization is interrogated. Experiments compare the stability of initiating monolayers for surface-initiated (SI) reversible addition-fragmentation chain transfer polymerization (SI-RAFT) and SI atom transfer radical polymerization (SI-ATRP). Initiator-functionalized substrates are stored under various conditions and grafting densities of the resulting polymer brush films are determined via in situ ellipsometry.

Surface Engineering with Polymer Brush Photolithography.

Surface-tethered macromolecules, or polymer brushes, offer a unique platform for coating surfaces for a wide variety of applications. Surface-initiated polymerization (SI-P), through which polymer brushes can be grown directly from an initiator-functionalized surface, offers a facile, highly customizable approach that is synergistic with photolithography. Using a variety of photolithography devices and SI-Ps, complex polymer brush architectures can be fabricated with great spatial and temporal control.

Mixed Polymer Brushes for "Smart" Surfaces.

Mixed polymer brushes (MPBs) are composed of two or more disparate polymers covalently tethered to a substrate. The resulting phase segregated morphologies have been extensively studied as responsive "smart" materials, as they can be reversible tuned and switched by external stimuli. Both computational and experimental work has attempted to establish an understanding of the resulting nanostructures that vary as a function of many factors.

Glass transition temperature from the chemical structure of conjugated polymers.

The glass transition temperature (T) is a key property that dictates the applicability of conjugated polymers. The T demarks the transition into a brittle glassy state, making its accurate prediction for conjugated polymers crucial for the design of soft, stretchable, or flexible electronics. Here we show that a single adjustable parameter can be used to build a relationship between the T and the molecular structure of 32 semiflexible (mostly conjugated) polymers that differ drastically in aromatic backbone and alkyl side chain chemistry.

SI-PET-RAFT: Surface-Initiated Photoinduced Electron Transfer-Reversible Addition-Fragmentation Chain Transfer Polymerization.

In this communication, surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer polymerization (SI-PET-RAFT) is introduced. SI-PET-RAFT affords functionalization of surfaces with spatiotemporal control and provides oxygen tolerance under ambient conditions. All hallmarks of controlled radical polymerization (CRP) are met, affording well-defined polymerization kinetics, and chain end retention to allow subsequent extension of active chain ends to form block copolymers.

Simultaneous Preparation of Multiple Polymer Brushes under Ambient Conditions using Microliter Volumes.

The fabrication of well-defined, multifunctional polymer brushes under ambient conditions is described. This facile method uses light-mediated, metal-free atom-transfer radical polymerization (ATRP) to grow polymer brushes with only microliter volumes required. Key to the success of this strategy is the dual action of N-phenylphenothiazine (PTH) as both an oxygen scavenger and polymerization catalyst.

Effects of Tailored Dispersity on the Self-Assembly of Dimethylsiloxane-Methyl Methacrylate Block Co-Oligomers.

The effect of dispersity on block polymer self-assembly was studied in the monodisperse limit using a combination of synthetic chemistry, matrix-assisted laser desorption ionization spectroscopy, and small-angle X-ray scattering. Oligo(methyl methacrylate) (oligoMMA) and oligo(dimethylsiloxane) (oligoDMS) homopolymers were synthesized by conventional polymerization techniques and purified to generate an array of discrete, semidiscrete, and disperse building blocks. Coupling reactions afforded oligo(DMS-MMA) block polymers with precisely tailored molar mass distributions spanning single molecular systems ( = 1.

Novel Strategy for Photopatterning Emissive Polymer Brushes for Organic Light Emitting Diode Applications.

A light-mediated methodology to grow patterned, emissive polymer brushes with micron feature resolution is reported and applied to organic light emitting diode (OLED) displays. Light is used for both initiator functionalization of indium tin oxide and subsequent atom transfer radical polymerization of methacrylate-based fluorescent and phosphorescent iridium monomers. The iridium centers play key roles in photocatalyzing and mediating polymer growth while also emitting light in the final OLED structure.

Metal-Free Removal of Polymer Chain Ends Using Light.

A light-mediated method for the facile removal of polymer end groups that are common to controlled radical polymerization techniques is presented. This metal-free strategy is general, being effective for chlorine, bromine, and thiocarbonylthio moieties as well as a number of different polymer families (styrenic, acrylic, and methacrylic). In addition to solution reactions, this process is readily translated to thin films, where light mediation allows the straightforward fabrication of hierarchically patterned polymer brushes.

Reorientation mechanisms of block copolymer/CdSe quantum dot composites under application of an electric field.

Time- and temperature-resolved in situ birefringence measurements were applied to analyze the effect of nanoparticles on the electric field-induced alignment of a microphase separated solution of poly(styrene)-block-poly(isoprene) in toluene. Through the incorporation of isoprene-confined CdSe quantum dots the reorientation behavior is altered. Particle loading lowers the order-disorder transition temperature, and increases the defect density, favoring nucleation and growth as an alignment mechanism over rotation of grains.

Engineering Surfaces through Sequential Stop-Flow Photopatterning.

Solution-exchange lithography is a new modular approach to engineer surfaces via sequential photopatterning. An array of lenses reduces features on an inkjet-printed photomask and reproduces arbitrarily complex patterns onto surfaces. In situ exchange of solutions allows successive photochemical reactions without moving the substrate and affords access to hierarchically patterned substrates.

Simple Benchtop Approach to Polymer Brush Nanostructures Using Visible-Light-Mediated Metal-Free Atom Transfer Radical Polymerization.

The development of an operationally simple, metal-free surface-initiated atom transfer radical polymerization (SI-ATRP) based on visible-light mediation is reported. The facile nature of this process enables the fabrication of well-defined polymer brushes from flat and curved surfaces using a "benchtop" setup that can be easily scaled to four-inch wafers. This circumvents the requirement of stringent air-free environments (i.

Orientation-Dependent Order-Disorder Transition of Block Copolymer Lamellae in Electric Fields.

Electric fields have been shown to stabilize the disordered phase of near-critical block copolymer solutions. Here, we use in situ synchrotron small-angle X-ray scattering to examine how the initial orientation of lamellar domains with respect to the external field (φ) affects the shift in the order-disorder transition temperature () of lyotropic solutions of poly(styrene--isoprene) in toluene. We find a downward shift of the transition temperature, which scales with lamellar orientation as Δ ∼ cos φ, in accordance with theory.

Electric field induced selective disordering in lamellar block copolymers.

External electric fields align nanostructured block copolymers by either rotation of grains or nucleation and growth depending on how strongly the chemically distinct block copolymer components are segregated. In close vicinity to the order-disorder transition, theory and simulations suggest a third mechanism: selective disordering. We present a time-resolved small-angle X-ray scattering study that demonstrates how an electric field can indeed selectively disintegrate ill-aligned lamellae in a lyotropic block copolymer solution, while lamellae with interfaces oriented parallel to the applied field prevail.

Cross-linking density and temperature effects on the self-assembly of SiO2-PNIPAAm core-shell particles at interfaces.

SiO2-PNIPAAm core-shell microgels (PNIPAAm=poly(N-isopropylacrylamide)) with various internal cross-linking densities and different degrees of polymerization were prepared in order to investigate the effects of stability, packing, and temperature responsiveness at polar-apolar interfaces. The effects were investigated using interfacial tensiometry, and the particles were visualized by cryo-scanning electron microscopy (SEM) and scanning force microscopy (SFM). The core-shell particles display different interfacial behaviors depending on the polymer shell thickness and degree of internal cross-linking.

Electric-field-induced alignment of block copolymer/nanoparticle blends.

External electric fields readily align birefringent block-copolymer mesophases. In this study the effect of gold nanoparticles on the electric-field-induced alignment of a lamellae-forming polystyrene-block-poly(2-vinylpyridine) copolymer is assessed. Nanoparticles are homogeneously dispersed in the styrenic phase and promote the quantitative alignment of lamellar domains by substantially lowering the critical field strength above which alignment proceeds.

Block Copolymer Nanocomposites in Electric Fields: Kinetics of Alignment.

We investigate the kinetics of block copolymer/nanoparticle composite alignment in an electric field using in situ transmission small-angle X-ray scattering. As a model system, we employ a lamellae forming polystyrene--poly(2-vinyl pyridine) block copolymer with different contents of gold nanoparticles in thick films under solvent vapor annealing. While the alignment improves with increasing nanoparticle fraction, the kinetics slows down.