Rational design of Boerhavia diffusa derived CoFeO-Carbon dots@Boehmite platform for photocatalysis and ultra trace monitoring of hazardous pesticide and UO ions.

In view of exploiting natural resources for designing of effectual materials in favor of detection and obliteration of water pollutants, a fluorescent nanomaterial (CDBHCF) based on biomass derived carbon dots (CDs) was constructed. The CDs and cobalt ferrite (CF) particles were anchored on boehmite (BH) which served as a support material for CDs. The CDBHCF nanocomposite was prepared via facile hydrothermal treatment for selective recognition of Methyl parathion (MP) pesticide and uranyl ions (UO).

Ultra-sensitive detection and scavenging of arsenic ions and ciprofloxacin using 3D multipurpose hemicellulose based aerogel: Adsorption mechanism and RSM optimization.

Trace level detection and efficient removal of arsenite ions (As (III)) and ciprofloxacin (CPR) antibiotic was achieved using hemicellulose based ratiometric fluorescent aerogel. Hemicellulose derived from rice straw was oxidised to dialdehyde hemicellulose followed by crosslinking using chitosan via a Schiff base reaction (C = N) yielding a highly porous 3D fluorescent aerogel (CS@DAHCA). Various factors governing adsorption were analyzed by applying response surface methodology (RSM) approach.

Real-Time Monitoring of a Sol-Gel Reaction for Polysilane Production Using Inline NIR Spectroscopy.

The sol-gel process is an effective method for the preparation of homogeneous structured nanomaterials whose physico-chemical properties strongly depend on the experimental conditions applied. The control of a three-component reaction with silanes showing multiple reaction sites revealed the need for an analytical tool that allows a rapid response to ongoing transformations in the reaction mixture. Herein, we describe the implementation of near-infrared (NIR) spectroscopy based on compact, mechanically robust, and cost-efficient micro-optomechanical system technology in the sol-gel process of three silanes with a total of nine reaction sites.

Structural Characterization of BIAN Type Molecules Used in Viscosity Reduction of Alkyl Magnesium Solutions.

,-diphenylacenaphthylene-1,2-diimines (BIANs) have been used to reduce the undesired high viscosity of alkyl magnesium solutions, which are known to form polymeric structures. In order to understand the mechanisms, analyses of the BIAN alkyl magnesium solutions have been carried out under inert conditions with SEC-MS, NMR, and FTIR and were compared to the structures obtained from HPLC-MS, FTIR, and NMR after aqueous workup. While viscosity reduction was shown for all BIAN derivatives used, only the bis (diisopropyl)-substituted BIAN could be clearly assigned to a single reaction product, which also could be reused without loss of efficiency or decomposition.

Hyperthermophilic methanogenic archaea act as high-pressure CH cell factories.

Bioprocesses converting carbon dioxide with molecular hydrogen to methane (CH) are currently being developed to enable a transition to a renewable energy production system. In this study, we present a comprehensive physiological and biotechnological examination of 80 methanogenic archaea (methanogens) quantifying growth and CH production kinetics at hyperbaric pressures up to 50 bar with regard to media, macro-, and micro-nutrient supply, specific genomic features, and cell envelope architecture. Our analysis aimed to systematically prioritize high-pressure and high-performance methanogens.

Development of a simultaneous bioreactor system for characterization of gas production kinetics of methanogenic archaea at high pressure.

Cultivation of methanogens under high pressure offers a great opportunity in biotechnological processes, one of which is the improvement of the gas-liquid transfer of substrate gases into the medium broth. This article describes a newly developed simultaneous bioreactor system consisting of four identical cultivation vessels suitable for investigation of microbial activity at pressures up to 50 bar and temperatures up to 145°C. Initial pressure studies at 10 and 50 bar of the autotrophic and hydrogenotrophic methanogens , , and were performed to evaluate the reproducibility of the system as well as to test the productivity of these strains.

Methods for quantification of growth and productivity in anaerobic microbiology and biotechnology.

Anaerobic microorganisms (anaerobes) possess a fascinating metabolic versatility. This characteristic makes anaerobes interesting candidates for physiological studies and utilizable as microbial cell factories. To investigate the physiological characteristics of an anaerobic microbial population, yield, productivity, specific growth rate, biomass production, substrate uptake, and product formation are regarded as essential variables.

Physiology and methane productivity of Methanobacterium thermaggregans.

Accumulation of carbon dioxide (CO), associated with global temperature rise, and drastically decreasing fossil fuels necessitate the development of improved renewable and sustainable energy production processes. A possible route for CO recycling is to employ autotrophic and hydrogenotrophic methanogens for CO-based biological methane (CH) production (CO-BMP). In this study, the physiology and productivity of Methanobacterium thermaggregans was investigated in fed-batch cultivation mode.

Biological methane production under putative Enceladus-like conditions.

The detection of silica-rich dust particles, as an indication for ongoing hydrothermal activity, and the presence of water and organic molecules in the plume of Enceladus, have made Saturn's icy moon a hot spot in the search for potential extraterrestrial life. Methanogenic archaea are among the organisms that could potentially thrive under the predicted conditions on Enceladus, considering that both molecular hydrogen (H) and methane (CH) have been detected in the plume. Here we show that a methanogenic archaeon, Methanothermococcus okinawensis, can produce CH under physicochemical conditions extrapolated for Enceladus.

Lignocellulose Nanofiber-Reinforced Polystyrene Produced from Composite Microspheres Obtained in Suspension Polymerization Shows Superior Mechanical Performance.

A facile approach to obtaining cellulose nanofiber-reinforced polystyrene with greatly improved mechanical performance compared to unreinforced polystyrene is presented. Cellulose nanofibers were obtained by mechanical fibrillation of partially delignified wood (MFLC) and compared to nanofibers obtained from bleached pulp. Residual hemicellulose and lignin imparted amphiphilic surface chemical character to MFLC, which enabled the stabilization of emulsions of styrene in water.

Mechanistic approaches on the antibacterial activity of poly(acrylic acid) copolymers.

The availability of polymeric antimicrobially active surfaces, which are mainly based on cationic surface effects, is limited. We have previously reported the discovery that, in addition to cationic surfaces, anionic surfaces based on poly(acrylic acid) (PAA) copolymers have a bactericidal effect. In this study, poly(styrene)-poly(acrylic acid)-diblock copolymers (PS-b-PAA) are used to describe the major variables causing the material to have a bactericidal effect on Escherichia coli ATCC 25922 in aqueous suspensions.

Antimicrobial activity of poly(acrylic acid) block copolymers.

The increasing number of antibiotic-resistant bacterial strains has developed into a major health problem. In particular, biofilms are the main reason for hospital-acquired infections and diseases. Once formed, biofilms are difficult to remove as they have specific defense mechanisms against antimicrobial agents.