Publications by authors named "Christian Brackmann"

A method based on femtosecond two-photon excitation has been developed for simultaneous visualization of interference-free fluorescence of H and O atoms in turbulent flames. This work shows pioneering results on single-shot simultaneous imaging of these radicals under non-stationary flame conditions. The fluorescence signal, showing the distribution of H and O radicals in premixed CH/O flames was investigated for equivalence ratios ranging from ϕ = 0.

View Article and Find Full Text PDF

Advanced instrumentation and versatile setups are needed for understanding light interaction with biological targets. Such instruments include (1) microscopes and 3D scanners for detailed spatial analysis, (2) spectral instruments for deducing molecular composition, (3) polarimeters for assessing structural properties, and (4) goniometers probing the scattering phase function of, e.g.

View Article and Find Full Text PDF

This paper presents a joint experimental and numerical study on premixed laminar ammonia/methane/air flames, aiming to characterize the flame structures and NO formation and determine the laminar flame speed under different pressure, equivalence ratio, and ammonia fraction in the fuel. The experiments were carried out in a lab-scale pressurized vessel with a Bunsen burner installed with a concentric co-flow of air. Measurements of NH and NO distributions in the flames were made using planar laser-induced fluorescence.

View Article and Find Full Text PDF

A time-resolving filtering technique developed to improve background suppression in Raman spectroscopy is presented and characterized. The technique enables separation of signal contributions via their polarization dependency by the addition of a waveplate to a normal measurement system and data post-processing. As a result, background interferences of broadband laser-induced fluorescence and incandescence, as well as flame luminosity and blackbody radiation, were effectively suppressed from Raman spectra.

View Article and Find Full Text PDF

Stray light is a known strong interference in spectroscopic measurements. Photons from high-intensity signals that are scattered inside the spectrometer, or photons that enter the detector through unintended ways, will be added to the spectrum as an interference signal. A general experimental solution to this problem is presented here by introducing a customized fiber for signal collection.

View Article and Find Full Text PDF
Article Synopsis
  • Online measurements during biomass gasification are crucial for understanding gas composition and improving process control, particularly concerning tars and water.
  • Tars, primarily made of hydrocarbons, can be analyzed with FT-IR spectroscopy, but a heated external cell is necessary to prevent condensation on instruments and maintain accuracy.
  • The new setup allowed for precise real-time FT-IR measurements, achieving a low error rate of 0.2% for permanent gases and confirming the reliability of tar concentration readings with other measurement methods.
View Article and Find Full Text PDF

A model based on rate-equation analysis has been developed for simulation of two-photon-excited laser-induced fluorescence of carbon monoxide (CO) in the Hopfield-Birge band at 230 nm. The model has been compared with experimental fluorescence profiles measured along focused beams provided by lasers emitting nano-, pico-, and femtosecond pulses. Good quantitative agreement was obtained between simulations and experimental data obtained in premixed CH/CH-air flames.

View Article and Find Full Text PDF

An understanding of potassium chemistry in energy conversion processes supports the development of complex biomass utilization with high efficiency and low pollutant emissions. Potassium exists mainly as potassium hydroxide (KOH), potassium chloride (KCl), and atomic potassium (K) in combustion and related thermochemical processes. We report, for the first time, the measurement of the ultraviolet (UV) absorption cross sections of KOH and KCl at temperatures between 1300 K and 1800 K, using a newly developed method.

View Article and Find Full Text PDF

Spectrally resolved ultraviolet (UV) absorption cross-sections of gas-phase sodium chloride (NaCl), potassium hydroxide (KOH), and sodium hydroxide (NaOH) were measured, for the first time, in hot flue gases at different temperatures. Homogenous gas-phase NaCl, KCl (potassium chloride), NaOH, and KOH at temperatures 1200 K, 1400 K, 1600 K, and 1850 K were prepared in the post-flame zone of laminar flames by seeding nebulized droplets out of aqueous solution of corresponding alkali species. The amount of droplets seeded into the flame was kept constant, so the relative concentration of different alkali species can be derived.

View Article and Find Full Text PDF

Laser-induced photofragmentation fluorescence has been investigated for the imaging of alkali compounds in premixed laminar methane-air flames. An ArF excimer laser, providing pulses of wavelength 193 nm, was used to photodissociate KCl, KOH, and NaCl molecules in the post-flame region and fluorescence from the excited atomic alkali fragment was detected. Fluorescence emission spectra showed distinct lines of the alkali atoms allowing for efficient background filtering.

View Article and Find Full Text PDF

A new scheme for NH detection by means of laser-induced fluorescence (LIF) with excitation around wavelength 385nm, accessible using the second harmonic of a solid-state Alexandrite laser, is presented. Detection of NH was confirmed by identification of corresponding lines in fluorescence excitation spectra measured in premixed NH-air flames and on NH radicals generated through NH photolysis in a nonreactive flow at ambient conditions. Moreover, spectral simulations allow for tentative NH line identification.

View Article and Find Full Text PDF

We report an innovative approach for time-domain measurements of S-branch Raman linewidths using hybrid picosecond/nanosecond pure-rotational coherent anti-Stokes Raman spectroscopy (RCARS). The Raman coherences are created by two picosecond excitation pulses and are probed using a narrow-band nanosecond pulse at 532 nm. The generated RCARS signal contains the entire coherence decay in a single pulse.

View Article and Find Full Text PDF

Proliferation, integration, and neurite extension of PC12 cells, a widely used culture model for cholinergic neurons, were studied in nanocellulose scaffolds biosynthesized by Gluconacetobacter xylinus to allow a three-dimensional (3D) extension of neurites better mimicking neuronal networks in tissue. The interaction with control scaffolds was compared with cationized nanocellulose (trimethyl ammonium betahydroxy propyl [TMAHP] cellulose) to investigate the impact of surface charges on the cell interaction mechanisms. Furthermore, coatings with extracellular matrix proteins (collagen, fibronectin, and laminin) were investigated to determine the importance of integrin-mediated cell attachment.

View Article and Find Full Text PDF

A laser diagnostic concept for measurement of potassium chloride (KCl) and potentially other alkali compounds in large-scale boilers and furnaces of limited optical access is presented. Single-ended, range-resolved, quantitative detection of KCl is achieved by differential absorption light detection and ranging (DIAL) based on picosecond laser pulses. Picosecond DIAL results have been compared experimentally with line-of-sight measurements using a commercial instrument, the in situ alkali chloride monitor (IACM), utilizing differential optical absorption spectroscopy.

View Article and Find Full Text PDF

The gas composition surrounding a catalytic sample has direct impact on its surface structure, which is essential when in situ investigations of model catalysts are performed. Herein a study of the gas phase close to a Pd(110) surface during CO oxidation under semirealistic conditions is presented. Images of the gas phase, provided by planar laser-induced fluorescence, clearly visualize the formation of a boundary layer with a significantly lower CO partial pressure close to the catalytically active surface, in comparison to the overall concentration as detected by mass spectrometry.

View Article and Find Full Text PDF

Chemical and structural composition of wood biomass is studied by label-free and chemically specific Coherent Anti-Stokes Raman Scattering (CARS) microscopy. A concept developed for assignment and semi-quantitative imaging of sample components; cellulose, hemicellulose, and lignin; by multiplex CARS microspectroscopy and subsequent data analysis is presented. Specific imaging without fluorescence backround is achieved an order of magnitude faster compared with conventional Raman microscopy.

View Article and Find Full Text PDF

Ammonia detection is highly relevant for combustion in boilers and furnaces since NH3 is able to suppress nitric oxide levels by catalytic as well as non-catalytic reduction. The mixing of ammonia with flue gases is an important parameter to obtain efficient non-catalytic reduction. In this paper picosecond DIAL was used for range-resolved, single ended, NH3 detection, utilizing a tunable picosecond laser source.

View Article and Find Full Text PDF

Non-linear microscopy has been used to characterize bovine smooth muscle cells and their proliferation, migration, and differentiation in hydrogel cellulose scaffolds, toward the development of fully functional blood vessel implants. The extracellular matrix (ECM) composed of cellulose and endogenous collagen fibers was imaged using Second Harmonic Generation (SHG) microscopy and the cell morphology by Coherent Anti-Stokes Raman Scattering (CARS) microscopy. Images prove that cells adhere on the cellulose scaffold without additional surface modification and that both contractile and proliferating phenotypes are developed.

View Article and Find Full Text PDF

There is increasing interest in bioengineering of lipids for use in functional foods, pharmaceuticals, and biofuels. Saccharomyces cerevisiae is a widely utilized cell factory for biotechnological production, thus a tempting alternative. Herein, we show how its neutral lipid accumulation varies throughout metabolic phases under nutritional conditions relevant for large-scale fermentation.

View Article and Find Full Text PDF

Cellulose perforated by micro-channels (Ø ~500 μm) has been investigated as a potential future scaffold material for meniscus implants. Scaffolds seeded with 3T6 fibroblasts were cultivated with mechanical stimulation in a compression bioreactor for enhanced collagen production. Constructs under dynamic compression at a frequency of 0.

View Article and Find Full Text PDF

Microscopy techniques based on laser-induced nonlinear optical processes allow for chemically specific imaging of unmodified samples at high spatial resolution in three dimensions and provide powerful tools for characterization of tissue-engineering constructs. This is highlighted by the simultaneous imaging of scaffold material, cells, and produced extracellular matrix collagen in samples consisting of osteoprogenitor MC3T3-E1 cells seeded on microporous bacterial cellulose (BC), a potential scaffold material for synthesis of osseous tissue. BC and collagen have been visualized by second harmonic generation (SHG) microscopy, and verification of collagen identification on cellulose scaffolds has been carried out on sectioned samples by comparison with the conventional histological staining technique.

View Article and Find Full Text PDF

Adiponectin is an adipokine with insulin-sensitising actions in vertebrates. Its receptors, AdipoR1 and AdipoR2, are PAQR-type proteins with 7-transmembrane domains and topologies reversed that of GPCR's, i.e.

View Article and Find Full Text PDF

The integration of living, human smooth muscle cells in biosynthesized cellulose scaffolds was monitored by nonlinear microscopy toward contractile artificial blood vessels. Combined coherent anti-Stokes Raman scattering (CARS) and second harmonic generation (SHG) microscopy was applied for studies of the cell interaction with the biopolymer network. CARS microscopy probing CH(2)-groups at 2845 cm(-1) permitted three-dimensional imaging of the cells with high contrast for lipid-rich intracellular structures.

View Article and Find Full Text PDF

Hallmarks of high-fat Western diet intake, such as excessive lipid accumulation in skeletal muscle and liver as well as liver fibrosis, are investigated in tissues from mice using nonlinear microscopy, second harmonic generation (SHG), and coherent anti-Stokes Raman scattering (CARS), supported by conventional analysis methods. Two aspects are presented; intake of standard chow versus Western diet, and a comparison between two high-fat Western diets of different polyunsaturated lipid content. CARS microscopy images of intramyocellular lipid droplets in muscle tissue show an increased amount for Western diet compared to standard diet samples.

View Article and Find Full Text PDF

The effects of different preparation methods on the bioaccessibility of β-carotene in orange-fleshed sweet potato (OFSP), an important food crop in sub-Saharan Africa, have been evaluated using an in vitro digestion procedure. The preparation methods included, on fresh roots, boiling followed by puréeing and oil addition (BOL) and homogenization followed by boiling and oil addition (HOM); on milled flour from freeze-dried fresh roots, cooking of porridge followed by oil addition (POA) and oil addition to flour followed by cooking of porridge (POB). The retention of all-trans-β-carotene ranged from 58% (POB) to 72% (BOL).

View Article and Find Full Text PDF