Integrating Bacteriocins and Biofilm-Degrading Enzymes to Eliminate Persistence.

is a Gram-positive bacterium causing listeriosis, a severe infection responsible for significant morbidity and mortality globally. Its persistence on food processing surfaces via biofilm formation presents a major challenge, as conventional sanitizers and antimicrobials exhibit limited efficacy against biofilm-embedded cells. This study investigates a novel approach combining an engineered polysaccharide-degrading enzyme (CAase) with a bacteriocin (thermophilin 110) produced by .

Transfer of beef bacterial communities onto food-contact surfaces.

Introduction: Food spoilage and pathogenic bacteria on food-contact surfaces, especially biofilm-forming strains, can transfer to meats during processing. The objectives of this study were to survey the bacterial communities of beef cuts that transfer onto two commonly used food-contact surfaces, stainless steel (SS) and high-density polyethylene (HDPE) and identify potentially biofilm-forming strains.

Methods: Top round, flank, chuck, and ground beef were purchased from 3 retail stores.

Synthesis and Characterization of Sol-Gelled Barium Zirconate as Novel MTA Radiopacifiers.

Barium zirconate (BaZrO, BZO), which exhibits superior mechanical, thermal, and chemical stability, has been widely used in many applications. In dentistry, BZO is used as a radiopacifier in mineral trioxide aggregates (MTAs) for endodontic filling applications. In the present study, BZO was prepared using the sol-gel process, followed by calcination at 700-1000 °C.

Effects of Calcination Temperature on the Synthesis of One-Pot Sol-Gelled Barium Titanate Powder and Its Performance as an Endodontic Radiopacifier.

Barium titanate (BaTiO, BTO), conventionally used for dielectric and ferroelectric applications, has been assessed for biomedical applications, such as its utilization as a radiopacifier in mineral trioxide aggregates (MTA) for endodontic treatment. In the present study, BTO powders were prepared using the sol-gel process, followed by calcination at 400-1100 °C. The X-ray diffraction technique was then used to examine the as-prepared powders to elucidate the effect of calcination on the phase composition and crystalline size of BTO.

Fe-Doped g-CN/BiMoO Heterostructured Composition with Improved Visible Photocatalytic Activity for Rhodamine B Degradation.

The binary heterostructured semiconducting visible light photocatalyst of the iron-doped graphitic carbon nitride/bismuth molybdate (Fe-g-CN/BiMoO) composite was prepared by coupling with Fe-doped g-CN and BiMoO particles. In the present study, a comparison of structural characteristics, optical properties, and photocatalytic degradation efficiency and activity between Fe-doped g-CN particles, BiMoO particles, and Fe-g-CN/BiMoO composite was investigated. The results of X-ray diffraction (XRD) examination indicate that the hydrothermal BiMoO particles have a single orthorhombic phase and Fourier transform infrared (FTIR) spectroscopy analysis confirms the formation of Fe-doped g-CN.

Detection and Isolation of Campylobacter spp. from Raw Meat.

This article presents a rapid yet robust protocol for isolating Campylobacter spp. from raw meats, specifically focusing on Campylobacter jejuni and Campylobacter coli. The protocol builds upon established methods, ensuring compatibility with the prevailing techniques employed by regulatory bodies such as the Food and Drug Administration (FDA) and the U.

Endodontic Radiopacifying Application of Barium Titanate Prepared through a Combination of Mechanical Milling and Heat Treatment.

Mineral trioxide aggregates (MTA) are commonly used as endodontic filling materials but suffer from a long setting time and tooth discoloration. In the present study, the feasibility of using barium titanate (BTO) for discoloration and a calcium chloride (CaCl) solution to shorten the setting time was investigated. BTO powder was prepared using high-energy ball milling for 3 h, followed by sintering at 700-1300 °C for 2 h.

Complete closed genome sequences of three multidrug-resistant uropathogenic .

Infection by antibiotic-resistant extraintestinal pathogenic may result in treatment failure and thus pose a serious public health threat. Here we report the complete closed genome sequence of three multidrug-resistant (MDR) human uropathogenic isolates using long-read sequencing technology and assembly.

Use of a commercial tissue dissociation system to detect Salmonella-contaminated poultry products.

Successful detection of bacterial pathogens in food can be challenging due to the physical and compositional complexity of the matrix. Different mechanical/physical and chemical methods have been developed to separate microorganisms from food matrices to facilitate detection. The present study benchmarked a commercial tissue digestion system that applies both chemical and physical methods to separate microorganisms from tissues against stomaching, a standard process currently utilized by commercial and regulatory food safety laboratories.

Missing Piece in Colloidal Stability─Morphological Factor of Hydrophobic Nanoparticles.

Hydrophobic nanoparticles (NPs) in water were considered unstable because they lack the repulsive electrostatic interaction and steric effect to prevent aggregation. In this study, porous hydrophobic NPs of two star-shaped giant molecules, , were found to be stable in water and able to retain their kinetic stability in a wide range of temperatures, pH values, and ionic strengths. Unlike the solid hydrophobic NPs that aggregate even with the negative zeta potential (ζ) induced by surface-structured hydrogen-bonded (SHB) water, the porous morphology of NPs reduces the entropically driven hydrophobic effect to prevent aggregation.

Complete Genome Sequences of a Stress-Resistant Outbreak-Associated Shiga Toxin-Producing Escherichia coli O157:H7 Strain and a Variant with Enhanced Congo Red-Binding Capability.

The genome sequences of Escherichia coli O157:H7 strain 380-94, which was isolated from a 1994 dry-cured salami outbreak, and a stronger Congo red-binding variant, RV06, were determined using long-read sequencing technology and assembly. Both strains possessed one chromosome and one plasmid. Strain RV06 possessed a 4,769-bp deletion in the region.

Discoloration Improvement by Mechanically-Milled Binary Oxides as Radiopacifier for Mineral Trioxide Aggregates.

Mineral trioxide aggregates (MTA) have been widely used in endodontic treatments, but after some time, patients suffer tooth discoloration due to the use of bismuth oxide (Bi2O3) as a radiopacifier. Replacement of Bi2O3 with high energy ball-milled single (zirconia ZrO2; hafnia, HfO2; or tantalum pentoxide, Ta2O5) or binary oxide powder was attempted, and corresponding discoloration improvement was investigated in the present study. Bi2O3-free MTA is expected to exhibit superior discoloration.

Sequence analysis and plasmid mobilization of a 6.6-kb kanamycin resistance plasmid, pSNC3-Kan, from a Salmonella enterica serotype Newport isolate.

Research on the transfer of antibiotic resistance plasmids has been mainly focused on the large multi-drug resistance conjugative plasmids, while the transmission of small mobilizable plasmids remains under-investigated. A series of diverse ColE-like kanamycin resistance plasmids ("KanR plasmids") from Salmonella enterica were characterized previously. In this study, the 6.

Effect of Tantalum Pentoxide Addition on the Radiopacity Performance of BiO/TaO Composite Powders Prepared by Mechanical Milling.

Among the various phases of bismuth oxide, the high temperature metastable face-centered cubic δ phase attracts great attention due to its unique properties. It can be used as an ionic conductor or an endodontic radiopacifying material. However, no reports concerning tantalum and bismuth binary oxide prepared by high energy ball milling and serving as a dental radiopacifier can be found.

Genomic Comparison of Conjugative Plasmids from and Encoding Beta-Lactamases and Capable of Mobilizing Kanamycin Resistance Col-like Plasmids.

and are important human pathogens that frequently contain plasmids, both large and small, carrying antibiotic resistance genes. Large conjugative plasmids are known to mobilize small Col plasmids, but less is known about the specificity of mobilization. In the current study, six and four strains containing large plasmids were tested for their ability to mobilize three different kanamycin resistance Col plasmids (KanR plasmids).

Water-Induced Self-Assembly of Amphiphilic Discotic Molecules for Adaptive Artificial Water Channels.

Inspired by the induced-fit mechanism in nature, we developed the process of water-induced self-assembly (WISA) to make water an active substrate that regulates the self-assembly and function of amphiphilic discotic molecules (ADMs). The ADM is an isotropic liquid that self-assembles only when in contact with water. Characterization results indicate that water fits into the hydrophilic core of the ADMs and induces the formation of a hexagonal columnar phase (Col), where each column contains a hydrated artificial water channel (AWC).

Mesoporous Properties of Bioactive Glass Synthesized by Spray Pyrolysis with Various Polyethylene Glycol and Acid Additions.

Mesoporous bioactive glass (MBG) has a high specific surface area, promoting the reaction area, thereby improving the bioactivity; thus, MBG is currently gaining popularity in the biomaterial field. Spray pyrolysis (SP) is a one-pot process that has the advantages of shorter process time and better particle bioactivity, therefore, MBG was prepared by SP process with various polyethylene glycol (PEG, molecular weight ranged from 2000-12,000) and acid (HCl and CHCOOH) additions. In vitro bioactivity and mesoporous properties of the so-obtained MBG were investigated.

Impact of Zr-Doped BiO Radiopacifier by Spray Pyrolysis on Mineral Trioxide Aggregate.

Mineral trioxide aggregates (MTA) have been developed as a dental root repair material for a range of endodontics procedures. They contain a small amount of bismuth oxide (BiO) as a radiopacifier to differentiate adjacent bone tissue on radiographs for endodontic surgery. However, the addition of BiO to MTA will increase porosity and lead to the deterioration of MTA's mechanical properties.

Vesicular Membrane with Structured Interstitial Water.

Self-assembled vesicles with structured (tetrahedral order with strong hydrogen bonds) interstitial water are reported. The vesicles, known as MCsome, are assembled from metal carbonyl compounds, FpR (Fp = (Cp)Fe(PPh)(CO)(CO-), Cp = cyclopentadiene, R = CBithiophene, CPyrene or C) with the Fp heads exposed to water. The R groups are surrounded by the interstitial water with the hydrogen bonding strength variable depending on the hydrophobicity of R groups.

Factors Affecting Treatment with Life-Saving Interventions, Computed Tomography Scans and Specialist Consultations.

Emergency treatments determined by emergency physicians may affect mortality and patient satisfaction. This paper attempts to examine the impact of patient characteristics, health status, the accredited level of hospitals, and triaged levels on the following emergency treatments: immediate life-saving interventions (LSIs), computed tomography (CT) scans, and specialist consultations (SCs). A multivariate logistic regression model was employed to analyze the impact of patient characteristics, including sex, age, income and the urbanization degree of the patient's residence; patient health status, including records of hospitalization and the number of instances of ambulatory care in the previous year; the Charlson Comorbidity Index (CCI) score; the accredited level of hospitals; and the triaged level of emergency treatments.

The Design of ZnO Nanorod Arrays Coated with MnOx for High Electrochemical Stability of a Pseudocapacitor Electrode.

Tremendous efforts have been made on the development of unique electrochemical capacitors or pseudocapacitors due to the overgrowing electrical energy demand. Here, the authors report a new and simple strategy for fabricating hybrid MnOx-coated ZnO nanorod arrays. First, the vertically aligned ZnO nanorods were prepared by chemical bath deposition (CBD) as a template providing a large surface area for active material deposition.

The complex multicellular morphology of the food spoilage bacteria strains isolated from ground chicken.

Herein we describe a highly structured, filamentous growth phenotype displayed by an isolate of the food spoilage microorganism . The growth morphology of this strain (strain BII) was dependent on environmental factors such as the growth media, incubation temperatures, and the inoculum concentration. Inoculation of cultures in highly dilute suspensions resulted in the formation of isolated, tight aggregates resembling fungal growth in liquid media.

Effects of Milling Time, Zirconia Addition, and Storage Environment on the Radiopacity Performance of Mechanically Milled BiO/ZrO Composite Powders.

Mineral trioxide aggregate (MTA) typically consists of Portland cement (75 wt.%), bismuth oxide (20 wt.%), and gypsum (5 wt.