Behaviors of AlGaN Strain Relaxation on a GaN Porous Structure Studied with d-Spacing Crystal Lattice Analysis.

The high porosity of a GaN porous structure (PS) makes it mechanically semi-flexible and can shield against the stress from the thick growth template on an overgrown layer to control the lattice structure or composition within the overgrown layer. To understand this stress shield effect, we investigated the lattice constant variations among different growth layers in various samples of overgrown AlGaN on GaN templates under different strain-relaxation conditions based on d-spacing crystal lattice analysis. The fabrication of a strain-damping PS in a GaN template shields against the stress from the thick GaN template on the GaN interlayer, which lies between the PS and the overgrown AlGaN layer, such that the stress counteraction of the AlGaN layer against the GaN interlayer can reduce the tensile strain in AlGaN and increase its critical thickness.

Effects of Surface Plasmon Coupling on the Color Conversion of an InGaN/GaN Quantum-Well Structure into Colloidal Quantum Dots Inserted into a Nearby Porous Structure.

To further enhance the color conversion from a quantum-well (QW) structure into a color-converting colloidal quantum dot (QD) through Förster resonance energy transfer (FRET), we designed and implemented a device structure with QDs inserted into a GaN nano-porous structure near the QWs to gain the advantageous nanoscale-cavity effect. Additionally, surface Ag nanoparticles were deposited for inducing surface plasmon (SP) coupling with the QW structure. Based on the measurements of time-resolved and continuous-wave photoluminescence spectroscopies, the FRET efficiency from QW into QD is enhanced through the SP coupling.

Nanoscale-cavity enhancement of color conversion with colloidal quantum dots embedded in the surface nano-holes of a blue-emitting light-emitting diode.

Although the method of inserting colloidal quantum dots (QDs) into deep nano-holes fabricated on the top surface of a light-emitting diode (LED) has been widely used for producing effective Förster resonance energy transfer (FRET) from the LED quantum wells (QWs) into the QDs to enhance the color conversion efficiency, an important mechanism for enhancing energy transfer in such an LED structure was overlooked. This mechanism, namely, the nanoscale-cavity effect, represents a near-field Purcell effect and plays a crucially important role in enhancing the color conversion efficiency. Here, we demonstrate the results of LED performance, time-resolved photoluminescence (TRPL), and numerical simulation to elucidate the nanoscale-cavity effect on color conversion by inserting a photoresist solution of red-emitting QDs into the nano-holes fabricated on a blue-emitting QW LED.

Enhancement of the Modulation Response of Quantum-Dot-Based Down-Converted Light through Surface Plasmon Coupling.

In this paper, we first elaborate on the effects of surface plasmon (SP) coupling on the modulation responses of the emission of a light-emitting diode (LED) and its down-converted lights through colloidal quantum dots (QDs). The results of our past efforts for this subject are briefly discussed. The discussions lay the foundation for the presentation of the new experimental data of such down-converted lights in this paper.

Formation of Surface Silver Nano-network Structures through Hot Electron Regulated Diffusion-limited Aggregation.

A surface Ag nano-network pattern is formed by first depositing Ag nanoparticles (NPs) on a conductive template, which has a certain defect structure, and then illuminating the Ag NPs with ultraviolet (UV) light in a moist environment. Such an Ag nano-network pattern consists of multiple connected Brownian trees (BTs), which are produced through the diffusion-limited aggregation (DLA) process. In the DLA process, diffuse Ag ions, which are generated by UV light illumination and dissolved by a thin adsorbed water layer on the surfaces of the Ag NPs and used GaN template, settle to form a BT through the combination with excited hot electrons migrating into the template from the Ag NPs.

AlGaN nano-shell structure on a GaN nanorod formed with the pulsed MOCVD growth.

An AlGaN/GaN multi-shell structure on a GaN nanorod (NR) is formed by using the self-catalytic pulsed growth process of metalorganic chemical vapor deposition with Ga and Al/N supplies in the first and second half-cycles, respectively. With Al supply, a thin AlGaN layer is precipitated near the end of a growth cycle to form the AlGaN/GaN structure. Because of the lower chemical potential for GaN nucleation, when compared with AlN, a GaN layer is first deposited in a growth cycle.

Enhancements of Cancer Cell Damage Efficiencies in Photothermal and Photodynamic Processes through Cell Perforation and Preheating with Surface Plasmon Resonance of Gold Nanoring.

The methods of cell perforation and preheating are used for increasing cell uptake efficiencies of gold nanorings (NRIs), which have the localized surface plasmon resonance wavelength around 1064 nm, and photosensitizer, AlPcS, and hence enhancing the cell damage efficiency through the photothermal (PT) and photodynamic (PD) effects. The perforation and preheating effects are generated by illuminating a defocused 1064-nm femtosecond (fs) laser and a defocused 1064-nm continuous (cw) laser, respectively. Cell damage is produced by illuminating cell samples with a focused 1064-nm cw laser through the PT effect, a focused 1064-nm fs laser through both PT and PD effects, and a focused 660-nm cw laser through the PD effect.

Sensitized TiO2 nanocomposites through HMME linkage for photodynamic effects.

Although TiO2 can be used to effectively generate reactive oxygen species (ROS) for photodynamic application, its absorption in the ultraviolet range makes the excitation harmful to tissue. Based on the concept of a sensitized solar cell, TiO2 nanoparticles (NPs) are sensitized by linking with the photosensitizer, HMME, to form HMME-TiO2 nanocomposites (NCs) for demonstrating the photodynamic effects under the illumination of white light. The HMME-TiO2 NCs of different composition ratios are prepared for maximizing the generation of ROS and optimizing the inactivation effect of KB cells.

Two stages weighted sampling strategy for detecting the relation between gene expression and disease.

For microarray data analysis, most of them focus on selecting relevant genes and calculating the classification accuracy by the selected relevant genes. This paper wants to detect the relation between the gene expression levels and the classes of a cancer (or a disease) to assist researchers for initial diagnosis. The proposed method is called a Two Stages Weighted Sampling strategy (TSWS strategy).

Diagnosis of oral precancer with optical coherence tomography.

A procedure for computer analyzing an optical coherence tomography (OCT) image of normal and precancerous oral mucosae is demonstrated to reasonably plot the boundary between epithelium (EP) and lamina propria (LP) layers, determine the EP thickness, and estimate the range of dysplastic cell distribution based on standard deviation (SD) mapping. In this study, 54 normal oral mucosa, 39 oral mild dysplasia, and 44 oral moderate dysplasia OCT images are processed for evaluating the diagnosis statistics. Based on SD mapping in an OCT image, it is found that the laterally average range percentages of 70% SD maximum level in the EP layer is a reasonably good threshold for differentiating moderate dysplasia from mild dysplasia oral lesion based on the OCT image analysis.

Effects of overgrown p-layer on the emission characteristics of the InGaN/GaN quantum wells in a high-indium light-emitting diode.

The counteraction between the increased carrier localization effect due to the change of composition nanostructure in the quantum wells (QWs), which is caused by the thermal annealing process, and the enhanced quantum-confined Stark effect in the QWs due to the increased piezoelectric field, which is caused by the increased p-type layer thickness, when the p-type layer is grown at a high temperature on the InGaN/GaN QWs of a high-indium light-emitting diode (LED) is demonstrated. Temperature- and excitation power-dependent photoluminescence (PL) measurements are performed on three groups of sample, including 1) the samples with both effects of thermal annealing and increased p-type thickness, 2) those only with the similar thermal annealing process, and 3) those with increased overgrowth thickness and minimized thermal annealing effect. From the comparisons of emission wavelength, internal quantum efficiency (IQE), spectral shift with increasing PL excitation level, and calibrated activation energy of carrier localization between various samples in the three groups, one can clearly see the individual effects of thermal annealing and increased p-type layer thickness.

Comparisons of clinical outcomes for thrombectomy devices with different mechanisms in hemodialysis arteriovenous fistulas.

Objectives: To compare clinical outcomes between mechanical thrombectomy devices with hydrodynamic mechanism and rotational mechanism.

Background: A number of advantages and concerns have been raised for different mechanical devices but the comparisons of clinical outcomes are absent, especially for the treatment of autogenous hemodialysis arteriovenous (AV) fistulas.

Methods: The authors retrospectively reviewed 275 percutaneous thrombectomy procedures in AV fistulas.

Motion-insensitive optical coherence tomography based micro-angiography.

An improved image processing procedure for suppressing the phase noise due to a motion artifact acquired during optical coherence tomography scanning and effectively illustrating the blood vessel distribution in a living tissue is demonstrated. This new processing procedure and the widely used procedure for micro-angiography application are based on the selection of high-frequency components in the spatial-frequency spectrum of B-mode scanning (x-space), which are contributed from the image portions of moving objects. However, by switching the processing order between the x-space and k-space, the new processing procedure shows the superior function of effectively suppressing the phase noise due to a motion artifact.

Method for suppressing the mirror image in Fourier-domain optical coherence tomography.

A method, novel to our knowledge, for effective mirror image suppression in Fourier-domain optical coherence tomography based on a phase shift between neighboring A-mode scans is demonstrated. By realizing that the phase shifts of the real and mirror images are mutually reversed and assuming that the real image intensities of the two successive A-mode scans are the same, we can solve a set of two coupled equations to obtain the real image signals. The images based on the scanning of a high-resolution spectral-domain optical coherence tomography system are processed to show effective mirror image suppression results.

Emission characteristics of organic light-emitting diodes and organic thin-films with planar and corrugated structures.

In this paper, we review the emission characteristics from organic light-emitting diodes (OLEDs) and organic molecular thin films with planar and corrugated structures. In a planar thin film structure, light emission from OLEDs was strongly influenced by the interference effect. With suitable design of microcavity structure and layer thicknesses adjustment, optical characteristics can be engineered to achieve high optical intensity, suitable emission wavelength, and broad viewing angles.

Differentiating oral lesions in different carcinogenesis stages with optical coherence tomography.

A swept-source optical coherence tomography (SS-OCT) system is used to clinically scan oral lesions in different oral carcinogenesis stages, including normal oral mucosa control, mild dysplasia (MiD), moderate dysplasia (MoD), early-stage squamous cell carcinoma (ES-SCC), and well-developed SCC (WD-SCC), for diagnosis purpose. On the basis of the analyses of the SS-OCT images, the stages of dysplasia (MiD and MoD), and SCC (ES-SCC and WD-SCC) can be differentiated from normal control by evaluating the depth-dependent standard deviation (SD) values of lateral variations. In the dysplasia stage, the boundary between the epithelium (EP) and lamina propria (LP) layers can still be identified and the EP layer becomes significantly thicker than that of normal control.

Landmine detection and classification with complex-valued hybrid neural network using scattering parameters dataset.

Neural networks have been applied to landmine detection from data generated by different kinds of sensors. Real-valued neural networks have been used for detecting landmines from scattering parameters measured by ground penetrating radar (GPR) after disregarding phase information. This paper presents results using complex-valued neural networks, capable of phase-sensitive detection followed by classification.

Polarized light propagation through scattering media: time-resolved Monte Carlo simulations and experiments.

A study of polarized light transmitted through randomly scattering media of a polystyrene-microsphere solution is described. Temporal profiles of the Stokes vectors and the degree of polarization are measured experimentally and calculated theoretically based on a Monte Carlo technique. The experimental results match the theoretical results well, which demonstrates that the time-resolved Monte Carlo technique is a powerful tool that can contribute to the understanding of polarization propagation in biological tissue.

Optical imaging based on time-resolved Stokes vectors in filamentous tissues.

Time-resolved Stokes vector components of light transmitted through filamentous tissues were measured with a view to improving the imaging quality of optical images in such tissues. Temporal profiles of the Stokes vectors and the time-resolved degree of polarization (DOP) were calibrated to produce higher image quality than that of images based on time gating, polarization discrimination, or both. A thin chicken bone inserted into chicken breast tissue with filament orientation in different directions with respect to the direction of input linear polarization was scanned to demonstrate images of higher spatial resolution and contrast based on the measurement of time-resolved DOP.

Multipoint temperature-independent fiber-Bragg-grating strain-sensing system employing an optical-power-detection scheme.

A temperature-independent fiber-Bragg-grating strains-sensing system, based on a novel optical-power-detection scheme, is developed and analyzed. In this system a pair of fiber Bragg gratings with reflection spectra either partially or substantially overlapping is placed side by side to form a temperature-independent strain-sensor unit. Conventional wavelength-interrogation techniques are not used here, and instead an optical-power-detection scheme is proposed to directly calibrate the measurand, i.