Flexible Non-Enzymatic Glucose Sensors: One-Step Green Synthesis of NiO Nanoporous Films via an Electro-Exploding Wire Technique.

In this study, we successfully synthesized nickel oxide (NiO) nanoparticles (NPs), i.e., samples , , and , via an environmentally friendly one-step electro-exploding wire technique by employing three distinct voltage levels of 24, 36, and 48 V, respectively.

A-LLTO Nanoparticles Embedded Composite Solid Polymer Electrolyte for Room Temperature Operational Li-metal Batteries.

Solid-state batteries (SSBs) have the potential to revolutionize the current energy storage sector. A significant portion of the current development of electric vehicles and the electrification of various appliances relies on Lithium (Li)-ion batteries. However, future energy demands will require the development of stronger and more reliable batteries.

Diagnosing and staging epithelial ovarian cancer by serum glycoproteomic profiling.

Background: There is a need for diagnostic tests for screening, triaging and staging of epithelial ovarian cancer (EOC). Glycoproteomics of blood samples has shown promise for biomarker discovery.

Methods: We applied glycoproteomics to serum of people with EOC or benign pelvic masses and healthy controls.

Mass Spectrometry Analysis of Glycopeptides Enriched by Anion Exchange-Mediated Methods Reveals PolyLacNAc-Extended -Glycans in Integrins and Tetraspanins in Melanoma Cells.

Glycosylation is a key modulator of the functional state of proteins. Recent developments in large-scale analysis of intact glycopeptides have enabled the identification of numerous glycan structures that are relevant in pathophysiological processes. However, one motif found in -glycans, poly--acetyllactosamine (polyLacNAc), still poses a substantial challenge to mass spectrometry-based glycoproteomic analysis due to its relatively low abundance and large size.

Variable PD-1 glycosylation modulates the activity of immune checkpoint inhibitors.

Monoclonal antibodies targeting the immune checkpoint PD-1 have provided significant clinical benefit across a number of solid tumors, with differences in efficacy and toxicity profiles possibly related to their intrinsic molecular properties. Here, we report that camrelizumab and cemiplimab engage PD-1 through interactions with its fucosylated glycan. Using a combination of protein and cell glycoengineering, we demonstrate that the two antibodies bind preferentially to PD-1 with core fucose at the asparagine N58 residue.

Fabry-Perot Oscillation and Resonance Energy Transfer: Mechanism for Ultralow-Threshold Optically and Electrically Driven Random Laser in Quasi-2D Ruddlesden-Popper Perovskites.

The recently emerged metal-halide hybrid perovskite (MHP) possesses superb optoelectronic features, which have obtained great attention in solid-state lighting, photodetection, and photovoltaic applications. Because of its excellent external quantum efficiency, MHP has promising potential for the manifestation of ultralow threshold optically pumped laser. However, the demonstration of an electrically driven laser remains a challenge because of the vulnerable degradation of perovskite, limited exciton binding energy (E), intensity quenching, and efficiency drop by nonradiative recombinations.

MTAP deficiency contributes to immune landscape remodelling and tumour evasion.

Methylthioadenosine phosphorylase (MTAP) deficiency occurs in various malignancies and is associated with poor survival in cancer patients. However, the mechanisms underlying tumour progression due to MTAP loss are yet to be elucidated. Utilizing integrated analyses of the transcriptome, proteome and secretome, we demonstrated that MTAP deficiency alters tumour-intrinsic, immune-related pathways and reprograms cytokine profiles towards a tumour-favourable environment.

Surficial grafting of organoimido moieties enhances the capacity performance of oxometallic clusters.

Molybdenum trioxide (MoO) with a theoretical specific capacity of 1117 mA h g is widely considered a promising anode material for lithium-ion batteries. However, the irreversible conversion reactions, low electrical conductivity, and detrimental volume expansion upon Li intercalation between the one-dimensional layered structures of MoO hinder its practical implementation. Herein, we report a facile synthetic protocol that allows surficial modification by replacing the terminal and bridging oxo groups of molybdenum oxide clusters.

Sweetening Lithium Metal Interface by High Surface and Adhesive Energy Coating of Crystalline α-d-Glucose Film to Inhibit Dendrite Growth.

The notorious growth of lithium (Li) dendrites and the instability of the solid electrolyte interface (SEI) during cycling make Li metal anodes unsuitable for use in commercial Li-ion batteries. Herein, the use of simple sugar coating (α-d-glucose) is demonstrated on top of Li metal to halt the growth of Li dendrites and stabilize the SEI. The α-d-glucose layer possesses high surface and adhesive energies toward Li, which promote the homogenous stripping and plating of Li ions on top of the Li metal.

Enhancing the Areal Capacity and Stability of CuZnSnS Anode Materials by Carbon Coating: Mechanistic and Structural Studies During Lithiation and Delithiation.

The widespread use of energy storage technologies has created a high demand for the development of novel anode materials in Li-ion batteries (LIBs) with high areal capacity and faster electron-transfer kinetics. In this work, carbon-coated CuZnSnS with a hierarchical 3D structure (CZTS@C) is used as an anode material for LIBs. The CZTS@C microstructures with enhanced electrical conductivity and improved Li-ion diffusivity exhibit high areal and gravimetric capacities of 2.

Introducing Postmetalation Metal-Organic Framework to Control Perovskite Crystal Growth for Efficient Perovskite Solar Cells.

A novel lead-containing metal-organic framework (Pb-MOF) is synthesized through postmetalation of MOF-525. Postmetalation renders lead ions bound with the organic linker of MOF-525, which can serve as nucleation points to promote perovskite crystallization. The introduction of lead postmetalated MOF-525 (Pb-MOF) as a scaffold layer between compact TiO (c-TiO) layer and perovskite layer promotes perovskite crystal growth in enlarging crystal grain size with better crystallinity, hence decreasing defect sites in the perovskite layer.

Light-controlled interconversion between a [2]daisy chain and a lasso-type pseudo[1]rotaxane.

A light-responsive self-complementary crown ether/ammonium conjugate bearing an arylazopyrazole photoswitch as a spacer can be switched between a [2]daisy chain (-isomer) and a lasso-type pseudo[1]rotaxane (-isomer) by light.

Electrochemical Performance of Orthorhombic CsPbI Perovskite in Li-Ion Batteries.

A facile solution process was employed to prepare CsPbI as an anode material for Li-ion batteries. Rietveld refinement of the X-ray data confirms the orthorhombic phase of CsPbI at room temperature. As obtained from bond valence calculations, strained bonds between Pb and I are identified within PbI octahedral units.

High-Performance Organic Solar Cells Featuring Double Bulk Heterojunction Structures with Vertical-Gradient Selenium Heterocyclic Nonfullerene Acceptor Concentrations.

In this study, we prepared organic photovoltaics (OPVs) featuring an active layer comprising double bulk heterojunction (BHJ) structures, featuring binary blends of a polymer donor and concentration gradients of two small-molecule acceptors. After forming the first BHJ structure by spin-coating, the second BHJ layer was transfer-printed onto the first using polydimethylsiloxane stamps. A specially designed selenium heterocyclic small-molecule acceptor (Y6-Se-4Cl) was employed as the second acceptor in the BHJ.

High-Performance Organic Photovoltaics Incorporating an Active Layer with a Few Nanometer-Thick Third-Component Layer on a Binary Blend Layer.

In this paper, a universal approach toward constructing a new bilayer device architecture, a few-nanometer-thick third-component layer on a bulk-heterojunction (BHJ) binary blend layer, has been demonstrated in two different state-of-the-art organic photovoltaic (OPV) systems. Through a careful selection of a third component, the power conversion efficiency (PCE) of the device based on PM6/Y6/layered PTQ10 layered third-component structure was 16.8%, being higher than those of corresponding devices incorporating the PM6/Y6/PTQ10 BHJ ternary blend (16.

Perovskite Quantum Wells Formation Mechanism for Stable Efficient Perovskite Photovoltaics-A Real-Time Phase-Transition Study.

The combination of a bulk 3D perovskite layer and a reduced dimensional perovskite layer (perovskite quantum wells (PQWs)) is demonstrated to enhance the performance of perovskite solar cells (PSCs) significantly in terms of stability and efficiency. This perovskite hierarchy has attracted intensive research interest; however, the in-depth formation mechanism of perovskite quantum wells on top of a 3D perovskite layer is not clearly understood and is therefore the focus of this study. Along with ex situ morphology and photophysical characterization, the time-resolved grazing-incidence wide-angle X-ray scattering (TS-GIWAXS) technique performed in this study provides real-time insights on the phase-transition during the organic cation (HTAB ligand molecule) coating and PQWs/3D architecture formation process.

Perovskite Quantum Dot Lasing in a Gap-Plasmon Nanocavity with Ultralow Threshold.

Lead halide perovskite materials have recently received considerable attention for achieving an economic and tunable laser owing to their solution-processable feature and promising optical properties. However, most reported perovskite-based lasers operate with a large lasing-mode volume, resulting in a high lasing threshold due to the inefficient coupling between the optical gain medium and cavity. Here, we demonstrate a continuous-wave nanolasing from a single lead halide perovskite (CsPbBr) quantum dot (PQD) in a plasmonic gap-mode nanocavity with an ultralow threshold of 1.

Layered perovskite materials: key solutions for highly efficient and stable perovskite solar cells.

Metal halide perovskites having three-dimensional crystal structures are being applied successfully in various optoelectronic applications. To address their most challenging issues-instability and toxicity-without losing efficiency, lower-dimensional perovskites appear to be promising alternatives. Recently, two-dimensional (2D) perovskite solar cells have been developed exhibiting excellent photostability and moisture-stability, together with moderate device efficiency.

Modulating Performance and Stability of Inorganic Lead-Free Perovskite Solar Cells via Lewis-Pair Mediation.

Fully inorganic perovskites based on Bi and Sb are emerging as alternatives that overcome the toxicity and low stability of their Pb-based perovskite counterparts. Nevertheless, the thin film fabrication of Pb-free perovskites remains a struggle, with poor morphologies and incomplete conversions greatly inhibiting device performance. In this study, we modulated the crystallization of an all-inorganic dimer phase of a Sb perovskite (d-CsSbI) through gradual increase in the annealing temperature, accompanied by the use of Lewis bases for adduct formation.

Asymmetric Benzotrithiophene-Based Hole Transporting Materials Provide High-Efficiency Perovskite Solar Cells.

In this study, we synthesized a series of small-molecule benzotrithiophenes (BTTs) and used them as hole transporting materials (HTMs) in perovskite solar cells (PSCs). The asymmetric benzo[2,1-:-3,4-':5,6-″]trithiophene unit was used as the central core to which were appended various donor groups, namely, carbazole (BTT-CB), thieno thiophene (BTT-FT), triphenylamine (BTT-TPA), and bithiophene (BTT-TT). The extended aromatic core in the asymmetric BTT provided full planarity, thereby favoring intermolecular π-stacking and charge transport.

Core-Twisted Tetrachloroperylenediimides: Low-Cost and Efficient Non-Fullerene Organic Electron-Transporting Materials for Inverted Planar Perovskite Solar Cells.

Herein, core-twisted tetrachloroperylenediimides (ClPDIs) were introduced as new efficient electron-transporting materials (ETMs) to replace the commonly used fullerene acceptor PC BM in inverted planar perovskite solar cells (PSCs). ClPDI showed a low-lying lowest unoccupied molecular orbital (LUMO) energy level of -3.95 eV, which was compatible with the conduction band of CH NH PbI Cl (-3.

Lead-Free Antimony-Based Light-Emitting Diodes through the Vapor-Anion-Exchange Method.

Hybrid lead halide perovskites continue to attract interest for use in optoelectronic devices such as solar cells and light-emitting diodes. Although challenging, the replacement of toxic lead in these systems is an active field of research. Recently, the use of trivalent metal cations (Bi and Sb) that form defect perovskites ABX has received great attention for the development of solar cells, but their light-emissive properties have not previously been studied.

Light-Responsive Arylazopyrazole Gelators: From Organic to Aqueous Media and from Supramolecular to Dynamic Covalent Chemistry.

Versatile photoresponsive gels based on tripodal low molecular weight gelators (LMWGs) are reported. A cyclohexane-1,3,5-tricarboxamide (CTA) core provides face-to-face hydrogen bonding and a planar conformation, inducing the self-assembly of supramolecular polymers. The CTA core was substituted with three arylazopyrazole (AAP) arms.

A lithium passivated MoO nanobelt decorated polypropylene separator for fast-charging long-life Li-S batteries.

Dissolution of lithium polysulfide (LiPS) into the electrolyte during discharging, causing shuttling of LiPS from the cathode to the lithium (Li) metal, is mainly responsible for the capacity decay and short battery life of lithium-sulfur batteries (LSBs). Herein, we designed a separator comprising polypropylene (PP) coated with MoO3 nanobelts (MNBs), prepared through facile grinding of commercial MoO3 powder. The formation of Li2Sn-MoO3 during discharging inhibited the polysulfide shuttling; during charging, Li passivated LixMoO3 facilitated ionic transfer during the redox reaction by decreasing the charge transfer resistance.

Mitigating Metal Dendrite Formation in Lithium-Sulfur Batteries via Morphology-Tunable Graphene Oxide Interfaces.

Despite issues related to dendrite formation, research on Li metal anodes has resurged because of their high energy density. In this study, graphene oxide (GO) layers are decorated onto Li metal anodes through a simple process of drop-casting and spray-coating. The self-assembly of GO is exploited to synthesize coatings having compact, mesoporous, and macroporous morphologies.