Rapid Antibacterial Assessments for Plastic and Textile Materials Against .

: Standard test methods for evaluating the antibacterial performance of plastic (non-porous) and textile (porous) materials are accurate and reliable, but completing a standard assessment generally requires at least several days to a week. Well-trained and experienced technicians are also required to conduct the standard tests consistently and analyse the samples and test results systemically. These costs are often not favourable for the performance assurance of antimicrobial products in industrial production, nor for meeting the fast-return demands in research and development of antimicrobial materials nowadays.

Unlocking Double Redox Reaction of Metal-Organic Framework for Aqueous Zinc-Ion Battery.

Metal-organic frameworks (MOFs) show wide application as the cathode of aqueous zinc-ion batteries (AZIBs) in the future owning to their high porosity, diverse structures, abundant species, and controllable morphology. However, the low energy density and poor cycling stability hinder the feasibility in practical application. Herein, an innovative strategy of organic/inorganic double electroactive sites is proposed and demonstrated to obtain extra capacity and enhance the energy density in a manganese-based metal-organic framework (Mn-MOF-74).

Antiviral and Antibacterial 3D-Printed Products Functionalised with Poly(hexamethylene biguanide).

Infection prevention and public health are a vital concern worldwide, especially during pandemics such as COVID-19 and seasonal influenza. Frequent manual disinfection and use of chemical spray coatings at public facilities are the typical measures taken to protect people from coronaviruses and other pathogens. However, limitations of human resources and coating durability, as well as the safety of disinfectants used are the major concerns in society during a pandemic.

Influence of Electrospinning Parameters on the Morphology of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fibrous Membranes and Their Application as Potential Air Filtration Materials.

A large number of non-degradable materials have severely damaged the ecological environment. Now, people are increasingly pursuing the use of environmentally friendly materials to replace traditional chemical materials. Polyhydroxyalkonates (PHAs) are receiving increasing attention because of the unique biodegradability and biocompatibility they offer.

Facile and Widely Applicable Route to Self-Adaptive Emissivity Modulation: Energy-Saving Demonstration with Transparent Wood.

The cooling power provided by radiative cooling is unwanted during cold hours. Therefore, self-adaptive regulation is desired for radiative cooling, especially in all-weather applications. However, current routes for radiative cooling regulation are constrained by substrates and complicated processing.

Reverse Micellar Dyeing of Cotton Fabric with Reactive Dye Using Biodegradable Non-Ionic Surfactant as Nanoscale Carrier: An Optimisation Study by One-Factor-at-One-Time Approach.

This study investigates the feasibility of using biodegradable secondary alcohol ethoxylate (SAE) non-ionic surfactant as a building block for the formation of reverse micelles, functioning as reactive dye carriers for the dyeing of cotton fabric in non-aqueous octane medium. Ten dyeing parameters were optimised, by a one-factor-at-a-time approach, namely: (i) effect of colour fixation agent; (ii) surfactant-to-water mole ratio; (iii) surfactant-to-co-surfactant mole ratio; (iv) volume of soda ash; (v) volume of dye; (vi) solvent-to-cotton ratio; (vii) dyeing temperature; (viii) dyeing time; (ix) fixation time; (x) soda-ash-to-cotton ratio. The colour properties, fastness properties and physical properties of SAE-dyed samples were experimentally compared with the conventional water-dyed samples.

Longitudinal Study on the Antimicrobial Performance of a Polyhexamethylene Biguanide (PHMB)-Treated Textile Fabric in a Hospital Environment.

Healthcare workers in the hospital environment are at risk of infection and body fluids such as saliva, bacterial contamination, oral bacteria, etc. directly or indirectly exacerbate this issue. These bio-contaminants, when adhered to hospital linens and clothing, grow substantially, as conventional textile products provide a favorable medium for bacterial and viral growth, adding to the risk of transmitting infectious diseases in the hospital environment.

Radiative Cooling Nanofabric for Personal Thermal Management.

A wearable textile that is engineered to reflect incoming sunlight and allow the transmission of mid-infrared radiation simultaneously would have a great impact on the human body's thermal regulation in an outdoor environment. However, developing such a textile is a tough challenge. Using nanoparticle-doped polymer (zinc oxide and polyethylene) materials and electrospinning technology, we have developed a nanofabric with the desired optical properties and good applicability.

Development of Antiviral CVC (Chief Value Cotton) Fabric.

The outbreak of COVID-19 has already generated a huge societal, economic and political losses worldwide. The present study aims to investigate the antiviral activity of Poly(hexamethylene biguanide) hydrochloride (PHMB) treated fabric against COVID-19 by using the surrogate Feline coronavirus. The antiviral analysis indicated that up to 94% of coronavirus was killed after contacting the CVC fabric treated with PHMB for 2 h, which suggests that PHMB treated fabric could be used for developing protective clothing and beddings with antiviral activity against coronavirus and can play a role in fighting the transmission of COVID-19 in the high-risk places.

Study on the Development of Antiviral Spandex Fabric Coated with Poly(hexamethylene biguanide) Hydrochloride (PHMB).

The spread of COVID-19 has brought about huge losses around the world. This study aims to investigate the applicability of PHMB used for developing antiviral spandex clothing against coronavirus. PHMB was qualitatively determined on the surface of spandex fabrics by using BPB.

Graphene Oxide/Reduced Graphene Oxide Enhanced Noniridescent Structural Colors Based on Silica Photonic Spray Paints with Improved Mechanical Robustness.

In contrast to traditional pigment colors, structural colors have developed a great potential in practical applications, thanks to their unique nonfading and color tunable properties; especially amorphous photonic structures with noniridescent structural colors have attracted considerable attention and their applications have expanded to more fields. Herein, graphene oxide (GO) and reduced graphene oxide (RGO) enhanced noniridescent structural colors with excellent mechanical robustness were established by a time-saving approach named spray coating, which allows for rapid fabrication of angular independent structural colors by spraying different photonic spray paints (PSPs) to ensure color multiplicity that was adjusted by the silica nanoparticles (SiO NPs) sizes onto the substrates. The incorporation of poly(methyl methacrylate-butyl acrylate) (PMB) improved the adhesion existing among SiO inter-nanoparticles and between SiO NPs and the substrates, taking advantages of the low glass transition temperature (Tg) of butyl acrylate derivative polymer and made PMB embedded PSPs coated patterns being imparted with good mechanical robustness and abrasive resistance.

Influence of pH-responsive compounds synthesized from chitosan and hyaluronic acid on dual-responsive (pH/temperature) hydrogel drug delivery systems of Cortex Moutan.

The polysaccharide-based pH-responsive compounds, namely, N,N,N-trimethyl chitosan (TMC), polyethylene glycolated hyaluronic acid (PEG-HA), and polysaccharide-based nano-conjugate of hyaluronic acid, chitosan oligosaccharide and alanine [HA-Ala-Chito(oligo)] were chemically synthesized using biopolymers chitosan and hyaluronic acid, and applied here to observe the changes in morphology, pH-stability, mechanical and drug-release behavior, and cytotoxicity of thermo-responsive polymer: Poloxamer 407 (PF127)-based drug delivery systems for traditional Chinese medicine Cortex Moutan (CM). The thermo-responsive hydrogel of PF127 loaded with CM (Gel) was used as control. The dual-responsive (pH/temperature) hydrogels: PF127/TMC/PEG-HA (Gel) and PF127/HA-Ala-Chito(oligo) (Gel) showed improved mechanical behavior as obtained by rheology and mechanical agitation study, and pH-stability under various external pH conditions, and those improvements occurred due to the addition of polysaccharide-based pH-responsive compounds in the systems.

A simple solution to recycle and reuse dental CAD/CAM zirconia block from its waste residuals.

Purpose To seek a simple solution that can recycle and regenerate dental CAD/CAM zirconia green blanks from its waste residuals.Methods Waste residuals (3M® Lava™ Plus HT) were pulverized after dry milling and cutting, and subsequently sieved before pickling in a 0.5 M nitric acid.

Reusable Face Masks as Alternative for Disposable Medical Masks: Factors that Affect their Wear-Comfort.

The coronavirus outbreak that commenced at the end of 2019 has led to a dramatic increase in the demand for face masks. In countries that are experiencing a shortage of face masks as a result of panic buying or inadequate supply, reusable fabric masks have become a popular option, because they are often considered more cost-effective and environmentally friendly than disposable medical masks. Nevertheless, there remains a significant variation in the quality and performance of existing face masks; not all are simultaneously able to provide protection against the extremely contagious virus and be comfortable to wear.

Fabrication of Structural-Coloured Carbon Fabrics by Thermal Assisted Gravity Sedimentation Method.

Structural-coloured poly(styrene-methyl methacrylate-acrylic acid) (Poly(St-MMA-AA)) deposited carbon fabrics (Poly(St-MMA-AA)/PCFs) with fascinating colours (salmon, chartreuse, springgreen, skyblue, mediumpurple) changing with the (Poly(St-MMA-AA) nanoparticle sizes can be facilely fabricated by the thermal-assisted gravity sedimentation method that facilitates the self-assembly of Poly(St-MMA-AA) colloidal nanoparticles to generate photonic crystals. The particle sizes of Poly(St-MMA-AA) copolymer with core/shell structure varying from 308.3 nm to 213.

Drug delivery system of dual-responsive PF127 hydrogel with polysaccharide-based nano-conjugate for textile-based transdermal therapy.

Pluronic F-127 based dual-responsive (pH/temperature) hydrogel drug delivery system was developed involving polysaccharide-based nano-conjugate of hyaluronic acid and chitosan oligosaccharide lactate and applied for loading of gallic acid which is the principal component of traditional Chinese medicine Cortex Moutan recommended in the treatment of atopic dermatitis. The polysaccharide-based nano-conjugate was used as pH-responsive compound in the formulation and its amphiphilic character was determined colorimetrically. Microstructure analysis by SEM and TEM indicated highly porous hydrogel network and well-dispersed micellar structures, respectively, after modification with the nano-conjugate, and so, release property of the hydrogel for drug was significantly improved.

Reverse Micellar Dyeing of Cotton Fiber with Reactive Dyes: A Study of the Effect of Water pH and Hardness.

Effects of hardness and the pH value of water in a water pool on PEG-based nonionic surfactant dyeing of cotton fiber with reactive dyes in a heptane reverse micelle system were investigated in terms of the color yield, reflectance, CIE *** value, and unlevelness. Results reveal that the effect of the water-pool pH value on the color yield and reflectance are more significant than the effect of hardness in the water pool. The dyed fabrics under an alkaline water-pool condition obtain a lower color yield and higher reflectance percentage than those under acidic and nearly neutral conditions.

Dual-responsive (pH/temperature) Pluronic F-127 hydrogel drug delivery system for textile-based transdermal therapy.

A dual-responsive hydrogel (pH/temperature) was developed from a thermos-responsive polymer, pluronic F-127 (PF127), and pH-responsive polymers, N,N,N-trimethyl chitosan (TMC) and polyethylene glycolated hyaluronic acid (PEG-HA). Gallic acid, the principal component of the traditional Chinese drug Cortex Moutan was loaded into the hydrogel (PF127/TMC/PEG-HA) for possible application in textile-based transdermal therapy as Cortex Moutan has been proven to be an effective drug for the treatment of atopic dermatitis (AD). TMC and PEG-HA were synthesized, characterized (H-NMR and FTIR), and added to the formulations to enhance drug release from the hydrogels, and increase the drug targeting of the carriers.

Photoactive cotton fabric for UV protection and self-cleaning.

Development of textile materials with tailored properties by coating with nano-materials is an emerging field of research. The preparation and characterization of photoactive cotton fabric for UV protection and self-cleaning properties are reported herein. In this study, a photoactive sol comprising of a reactive blue dye, C.

Thermoresponsive Hydrogels and Their Biomedical Applications: Special Insight into Their Applications in Textile Based Transdermal Therapy.

Various natural and synthetic polymers are capable of showing thermoresponsive properties and their hydrogels are finding a wide range of biomedical applications including drug delivery, tissue engineering and wound healing. Thermoresponsive hydrogels use temperature as external stimulus to show sol-gel transition and most of the thermoresponsive polymers can form hydrogels around body temperature. The availability of natural thermoresponsive polymers and multiple preparation methods of synthetic polymers, simple preparation method and high functionality of thermoresponsive hydrogels offer many advantages for developing drug delivery systems based on thermoresponsive hydrogels.

A Review of Fusible Interlinings Usage in Garment Manufacture.

The consumer's enhanced awareness of garment quality, appearance, and related eco-safety production manufacture means that not only shell fabrics, but also accessory materials should be paid much more attention. Interlining is the one of the most important and state of the art accessory materials that currently lacks review and exploration. This article comprehensively demonstrates an organizational integration of interlinings which includes their history, classification, manufacture, characteristic, properties, function, fusing technology and application.

A Computer Color-Matching Study of Reverse Micellar Dyeing of Wool with Reactive Dyes.

Computer color-matching (CCM) and the levelness of poly(ethylene glycol)-based reverse-micellar dyed wool fabrics in octane and nonane were investigated and compared with a conventional water-based dyeing system. Reflectance curves and calibration curves exhibited no chromatic change and maintained high linearity in both dyeing systems. The linearity of water-dyed calibration curves was slightly higher than that of the reverse-micellar dyed curves.

Design of High-Performance Wearable Energy and Sensor Electronics from Fiber Materials.

A fiber material is composed of a group of flexible fibers that are assembled in a certain dimensionality. With its good flexibility, high porosity, and large surface area, it demonstrates a great potential in the development of flexible and wearable electronics. In this work, a kind of nickel/active material-coated flexible fiber (NMF) electrodes, such as Ni/MnO/reduced graphene oxide (rGO) NMF electrodes, Ni/carbon nanotube (CNT) NMF electrodes, and Ni/G NMF electrodes, is developed by a new general method.

Preparation and Characterization of Electrospun PAN/PSA Carbonized Nanofibers: Experiment and Simulation Study.

In this study, we simulated the electric field distribution of side-by-side electrospinning by using the finite element method (FEM), and studied the effects of spinneret wall thickness, spinning voltage and receiving distance on the distribution of the electrostatic field. The receiving distance was selected as a variable in the experimental, a series of PAN/PSA composite nanofiber membranes were prepared by using a self-made side by side electrospinning device. The membranes were tested by Fourier-transform infrared (FTIR), thermogravimetric analysis (TG), and scanning electron microscope (SEM).

Assessing the accumulated stickiness magnitude from fabric-skin friction: effect of wetness level of various fabrics.

Increasing skin wetness tends to increase fabric-skin adhesion and friction, resulting in wear discomfort or skin injuries. Here, the magnitude estimation approach was used to assess the stickiness sensation perceived in fabrics. Seven fabric types were wetted by putting onto wet 'skin' surface and dried for different durations to achieve different wetness levels, simulating wearing conditions during the recovery period after sweating.