Isotherm, Kinetics and Thermodynamics of Cu(II) and Pb(II) Adsorption on Groundwater Treatment Sludge-Derived Manganese Dioxide for Wastewater Treatment Applications.

The ubiquitous occurrence of heavy metals in the aquatic environment remains a serious environmental and health issue. The recovery of metals from wastes and their use for the abatement of toxic heavy metals from contaminated waters appear to be practical approaches. In this study, manganese was recovered from groundwater treatment sludge via reductive acid leaching and converted into spherical aggregates of high-purity MnO.

Manganese and iron recovery from groundwater treatment sludge by reductive acid leaching and hydroxide precipitation.

In this study, the recovery of manganese (Mn) and iron (Fe) from groundwater treatment sludge through reductive acid leaching and hydroxide precipitation was investigated. Maximum leached Mn (100%) was obtained using sulfuric acid and hydrogen peroxide at 25 °C. Leached Mn and Fe decreased with the increase in the solid-liquid ratio.

Adsorption of indium(III) ions from aqueous solution using chitosan-coated bentonite beads.

Batch adsorption study was utilized in evaluating the potential suitability of chitosan-coated bentonite (CCB) as an adsorbent in the removal of indium ions from aqueous solution. The percentage (%) removal and adsorption capacity of indium(III) were examined as a function of solution pH, initial concentration, adsorbent dosage and temperature. The experimental data were fitted with several isotherm models, where the equilibrium data was best described by Langmuir isotherm.

Ultrasound irradiation combined with hydraulic cleaning on fouled polyethersulfone and polyvinylidene fluoride membranes.

In this study, an ultrasonic irradiation technique was utilized to mitigate the fouling of polyethersulfone (PES) and polyvinylidene fluoride (PVDF) membranes. The use of ultrasound at 20 kHz was applied to a dead-end microfiltration cell in order to mitigate fouling caused by the presence of colloidal bentonite particles. The effect of ultrasonic power and pulse duration on the permeate flux recovery was examined.

Feasibility studies on arsenic removal from aqueous solutions by electrodialysis.

The effectiveness of electrodialysis (ED) in removing inorganic arsenic (As) from aqueous solution was investigated. A tailor-made ED stack was used to perform current-voltage and optimization experiments in a recirculating batch mode. Samples were pre-oxidized with NaClO using 1:2 sample to oxidant weight ratio (RS:O) to transform 100% of As(III) to As(V) in 180 seconds.

Adsorption of Mn2+ from aqueous solution using Fe and Mn oxide-coated sand.

The adsorption of Mn2+ onto immobilized Mn-oxide and Fe-oxide adsorbent such as manganese oxide-coated sandl (MOCS1), manganese oxide-coated sand2 (MOCS2), iron oxide-coated sand2 (IOCS2), and manganese and iron oxide-coated sand (MIOCS) was investigated. The effects of pH (5.5 to 8.