Enhancement of antibacterial activity in electrospun fibrous membranes based on quaternized chitosan with caffeic acid and berberine chloride for wound dressing applications.

Electrospun nanofibers made from chitosan are promising materials for surgical wound dressings due to their non-toxicity and biocompatibility. However, the antibacterial activity of chitosan is limited by its poor water solubility under physiological conditions. This study addresses this issue by producing electrospun nanofibers mainly from natural compounds, including chitosan and quaternized chitosan, which enhance both its solubility for electrospinning and the antibacterial activity of the resulting electrospun nanofibers.

Enhancing Optoelectronic Anisotropy in Highly Oriented Thin Films by Fluorine Substitution in Novel Semiconducting Polymers.

The recent past has witnessed remarkable progress in organic electronics, driven by the quest for flexible, lightweight, and cost-effective electronic devices. Semiconducting polymers (SCPs) have emerged as key materials in this field, offering unique electronic and optoelectronic properties along with mechanical flexibility. This study focuses on designing, synthesizing, and utilizing novel donor-acceptor (D-A) copolymer-based SCPs introducing a difluorothiophene moiety in the polymeric backbone.

Reaching Nearly 100% Quantum Efficiencies in Thin Solid Films of Semiconducting Polymers via Molecular Confinements under Large Segmental Stresses.

Quantum efficiencies remain a critical issue for general applications of semiconducting polymers in optoelectronics and others. In this work, we demonstrate that nearly 100% quantum efficiencies (η's) in thin solid films can be reached when the polymer molecules are mechanically stretched into molecular confinement. We selected three conjugated polymers of varied backbone stiffness and interchain coupling, prepared in both diluted and pristine states.

Numerical Study of Customized Artificial Cornea Shape by Hydrogel Biomaterials on Imaging and Wavefront Aberration.

The blindness caused by cornea diseases has exacerbated many patients all over the world. The disadvantages of using donor corneas may cause challenges to recovering eye sight. Developing artificial corneas with biocompatibility may provide another option to recover blindness.

Nanopiezoelectric Devices for Energy Generation Based on ZnO Nanorods/Flexible-Conjugated Copolymer Hybrids Using All Wet-Coating Processes.

In this study, nanopiezoelectric devices based on ZnO nanorod array/conducting polymers are fabricated for wearable power generation application. To replace the inorganic rigid indium-tin oxide (ITO) conducting coating commonly used in the nanogenerator devices, a series of flexible polyaniline-based conducting copolymers underlying the perpendicularly-oriented ZnO nanorod arrays has been synthesized with improved electric conductivity by the copolymerization of aniline and 3,4-ethylenedioxythiophene (EDOT) monomers in order to optimize the piezoelectric current collection efficiency of the devices. It is found that significantly higher conductivity can be obtained by small addition of EDOT monomer into aniline monomer solution using an in-situ oxidative polymerization method for the synthesis of the copolymer coatings.

Numerical Study of Tunable Photonic Nanojets Generated by Biocompatible Hydrogel Core-Shell Microspheres for Surface-Enhanced Raman Scattering Applications.

Core-shell microspheres have been applied in various research areas and, in particular, they are used in the generation of photonic nanojets with suitable design for photonic applications. The photonic nanojet is a narrow and focused high-intensity light beam emitting from the shadow-side of microspheres with tunable effective length, thus enabling its applications in biosensing technology. In this paper, we numerically studied the photonic nanojets brought about from biocompatible hydrogel core-shell microspheres with different optical properties.

Facile fabrication of superporous and biocompatible hydrogel scaffolds for artificial corneal periphery.

Biocompatible and highly porous network hydrogel scaffolds were fabricated for the development of artificial cornea (AC) periphery/skirt that could be used to enhance the long-term retention of the implants. In this study, a series of hydrogel scaffolds for this application was fabricated from the photo-polymerization of a mixture of poly(ethylene glycol) (PEG)- and poloxamer (P407)-based macromer solutions in dichloromethane in which solvent-induced phase separation (SIPS) arose to form scaffolds with macroporous structure and high water content. The overall porosity ranging from 20% to 75% and open/closed pore structure of the hydrogel scaffolds could be finely tuned by varying the ratio of P407/PEG in the macromer solution and solvent type.

Estimation of the Corneal Young's Modulus Based on a Fluid-Filled Spherical-Shell Model with Scheimpflug Imaging.

Current intraocular pressure (IOP) measurement using air puff could be erroneous without applying proper corrections. Although noncontact tonometry is not considered to be accurate, it is still popularly used by eye clinics. It is thus necessary to extract the correct information from their results.

Detection of K Efflux from Stimulated Cortical Neurons by an Aptamer-Modified Silicon Nanowire Field-Effect Transistor.

The concentration gradient of K across the cell membrane of a neuron determines its resting potential and cell excitability. During neurotransmission, the efflux of K from the cell via various channels will not only decrease the intracellular K content but also elevate the extracellular K concentration. However, it is not clear to what extent this change could be.

Ultrasound-responsive NIPAM-based hydrogels with tunable profile of controlled release of large molecules.

Episodic release of bioactive compounds plays an important role in biological systems. "On-demand" release systems which based on polymeric materials and activated by external stimuli may provide the necessary functionality. Here we describe an ultrasound-responsive hydrogel based on N-isopropylacrylamide (NIPAM) and N,N'-methylenebisacrylamide (MBAm), which is suitable for triggered release of two large molecules: bovine serum albumin (BSA, 66kDa) and dextran (3-5kDa).

Synthesis and Characterization of Two-Dimensional Conjugated Polymers Incorporating Electron-Deficient Moieties for Application in Organic Photovoltaics.

A series of novel p-type conjugated copolymers, PTTVBDT, PTTVBDT-TPD, and PTTVBDT-DPP, cooperating benzo[1,2-b:4,5-b']dithiophene (BDT) and terthiophene-vinylene (TTV) units with/without thieno[3,4-]pyrrole-4,6-dione (TPD) or pyrrolo[3,4-]pyrrole-1,4-dione (DPP) via Stille polymerization were synthesized and characterized. Copolymer PTTVBDT shows a low-lying HOMO energy level and ordered molecular-packing behavior. Furthermore, two terpolymers, PTTVBDT-TPD and PTTVBDT-DPP, display stronger absorption ability, alower-lying HOMO energy level, and preferred molecular orientation, due to the replacement TTV-monomer units with electron-deficient groups.

Hydrogen bonds of a novel resin cement contribute to high adhesion strength to human dentin.

Objective: The detachment of fiber posts from root canals is primarily caused by the loss of adhesion between dentin and cement; therefore, the purpose of this study was to formulate a novel resin cement that improves the bond strength of fiber posts to the dentin-cement interface.

Methods: Three concentrations (30, 35, and 40wt.%) of bis[2-(methacryloyloxy)-ethyl] phosphate (2MP) were prepared as dentin bonding agent components.

Co-crystallization phase transformations in all π-conjugated block copolymers with different main-chain moieties.

Driven by molecular affinity and balance in the crystallization kinetics, the ability to co-crystallize dissimilar yet self-crystallizable blocks of a block copolymer (BCP) into a uniform domain may strongly affect its phase diagram. In this study, we synthesize a new series of crystalline and monodisperse all-π-conjugated poly(2,5-dihexyloxy-p-phenylene)-b-poly(3-(2-ethylhexyl)thiophene) (PPP-P3EHT) BCPs and investigate this multi-crystallization effect. Despite vastly different side-chain and main-chain structures, PPP and P3EHT blocks are able to co-crystallize into a single uniform domain comprising PPP and P3EHT main-chains with mutually interdigitated side-chains spaced in-between.

Self-assembled all-conjugated block copolymer as an effective hole conductor for solid-state dye-sensitized solar cells.

An all-conjugated diblock copolymer, poly(2,5-dihexyloxy-p-phenylene)-b-poly(3-hexylthiophene) (PPP-b-P3HT), was synthesized and applied as a hole transport material (HTM) for the fabrication of solid-state dye-sensitized solar cells (ss-DSCs). This copolymer is characterized by an enhanced crystallinity, enabling its P3HT component to self-organize into interpenetrated and long-range-ordered crystalline fibrils upon spin-drying and ultimately endowing itself to have a faster hole mobility than that of the parent P3HT homopolymer. Transient photovoltage measurements indicate that the photovoltaic cell based on PPP-b-P3HT as the HTM has a longer electron lifetime than that of the reference device based on P3HT homopolymer.

Solution self-assembly and phase transformations of form II crystals in nanoconfined poly(3-hexyl thiophene) based rod-coil block copolymers.

Solution processing of π-conjugated polymers constitutes a major low-cost manufacturing method for the fabrication of many new organic optoelectronic devices. The solution self-assembly kinetics of π-conjugated rod-coil block copolymers of symmetric poly(3-hexyl thiophene)-b-poly(2-vinyl pyridine) (P3HT-P2VP) during drying and the phase transformations of the subsequently dried samples were studied by using a combination of TEM, SAXS, WAXS and DSC measurements. During solution drying in chlorobenzene, a good solvent for the copolymer, P3HT-P2VP first formed nanoseed aggregates followed by the directional growth of nanofibrils driven by the formation of prevailing form II P3HT crystals within its nanofibril core confined by the surrounding domain of P2VP blocks.

Band gap engineering via controlling donor-acceptor compositions in conjugated copolymers.

Varying composition of π-donor/acceptor moieties has been considered as an effective strategy for fine-tuning of the electronic properties of D-A conjugated copolymers. In this study, the change of optoelectronic properties with the change of donor/acceptor ratios is investigated on the basis of first-principles density functional calculations. Copolymers containing moieties of similar π-electron donating and/or accepting capabilities, e.

Effect of TiO2 nanoparticles on self-assembly behaviors and optical and photovoltaic properties of the P3HT-b-P2VP block copolymer.

An ordered nanostructure can be created from the hybrid materials of self-assembly poly(3-hexyl thiophene-b-2-vinyl pyridine) and nicotinic acid-modified titanium dioxide nanoparticles (P3HT-b-P2VP/TiO(2)). TEM and XRD analyses reveal that the TiO(2) nanoparticles (NPs) are preferentially confined in the P2VP domain of P3HT-b-P2VP whereas TiO(2) NPs interact with either pure P3HT or a blend of P3HT and P2VP to produce microsized phase segregation. The morphologies of lamellar and cylindrical structures are disturbed when the loading of TiO(2) NPs is 40 wt % or higher.

In-situ template synthesis of a polymer/semiconductor nanohybrid using amphiphilic conducting block copolymers.

In this study, we synthesized organic/inorganic hybrid materials containing cadmium sulfide (CdS) nanoparticles using a novel amphiphilic conducting block copolymer as a synergistic structure-directing template and an efficient exciton quencher of the hybrid. The amphiphilic rod-coil block copolymer of polyphenylene-b-poly(2-vinyl pyridine) (PPH-PVP) was first prepared from its coil-coil precursor block copolymer of poly(1,3-cyclohexadiene)-b-poly(2-vinyl pyridine) (PCHD-PVP) by using sequential anionic polymerization followed by the aromatization reaction of converting the PCHD block to form conducting PPH. The synthesized PCHD-PVP block copolymers self-assembled into different bulk nanostructures of lamellae, cylinders, and spheres at a volume fraction similar to that of many coil-coil block copolymer systems.

A miniature system for separating aerosol particles and measuring mass concentrations.

We designed and fabricated a new sensing system which consists of two virtual impactors and two quartz-crystal microbalance (QCM) sensors for measuring particle mass concentration and size distribution. The virtual impactors utilized different inertial forces of particles in air flow to classify different particle sizes. They were designed to classify particle diameter, d, into three different ranges: d<2.

P(AA-SA) latex particle synthesis via inverse miniemulsion polymerization-nucleation mechanism and its application in pH buffering.

In this work, poly(acrylic acid-co-sodium acrylate) P(AA-SA) latex particles were prepared by inverse miniemulsion polymerization and used as a pH buffering agent for application. The polymerization was quickly initiated by a redox initiator (ammonium persulfate/sodium metabisulfite) at 0-5 degrees C. Thus the possibility of monomer dissolving in a solvent was reduced, which enhanced the degree of droplet nucleation.

Synthesis of nano-sized TiO(2)/poly(AA-co-MMA) composites by heterocoagulation and blending with PET.

Nano-sized TiO(2) or SiO(2)/TiO(2) particles were prepared by hydrolysis and condensation reactions in aqueous media, followed by mixing with poly(AA-co-MMA) latex to form different composites, then blending with poly(ethylene terephthalate), PET. The TGA results of composites indicated that negative charged latexes had greater interaction with TiO(2)/ or SiO(2)/TiO(2) particles through strong electrostatic forces, while cationic latexes incorporated with TiO(2) or SiO(2)/TiO(2) particles by pH induced coagulation, carbonyl group chelation and hydrogen bonding. The soapless latex polymer particles showed lower ability of adsorption to TiO(2) particles due to the decrease of total surface area of these larger particles.