Prospective, randomized clinical trial evaluating the clinical performance of a new universal adhesive in Class I and Class II restorations at 1 year.

Objective: This randomized controlled trial compared the 1-year clinical efficacy of Scotchbond Universal Adhesive Plus (SBU+) with that of its predecessor Scotchbond Universal Adhesive (SBU) to restore Class I and Class II preparations using the self-etch strategy in adult patients.

Materials And Methods: Fifty-one subjects participated in this study. Two posterior teeth in each subject were randomized to a restoration with SBU+ or to a restoration with SBU (control) using the self-etch strategy.

Quality of different obturation techniques to fill perforating internal root resorption: a micro-computed tomographic study.

Background: This study aimed to assess the quality of various obturation techniques to fill perforation caused by internal root resorption using Micro-computed Tomography.

Methods: Cone-beam computed tomography images of a maxillary central incisor tooth with perforating internal resorptive defect were used to create a 3D printed model of the affected tooth. The replicas were divided into four groups based on the obturation technique used.

Interpenetrating nanofibrillar membrane of self-assembled collagen and antimicrobial peptides for enhanced bone regeneration.

Bone regeneration remains a major clinical challenge, especially when infection necessitates prolonged antibiotic treatment. This study presents a membrane composed of self-assembled and interpenetrating GL13K, an antimicrobial peptide (AMP) derived from a salivary protein, in a collagen membrane for antimicrobial activity and enhanced bone regeneration. Commercially available collagen membranes were immersed in GL13K solution, and self-assembly was initiated by raising the solution pH to synthesize the multifunctional membrane called COL-GL.

Clinical performance of two ion-releasing bulk-fill composites in class I and class II restorations: A two-year evaluation.

Objectives: This randomized clinical trial evaluated and compared the 2-year clinical performance of two ion-releasing bulk-fill composites (Cention N and Surefil One) with that of a conventional bulk-fill resin composite (Powerfil) in Class I and II cavities.

Methods: Thirty-two patients, each with 3 Class I and/or Class II cavities under occlusion, were enrolled in this trial. A total of 96 restorations were placed, 32 for each material, as follows: a self-adhesive composite; Surefil-one, alkasite; Cention N, and a bulk-fill resin composite; Powerfil.

Auto-Segmentation and Quantification of Non-Cavitated Enamel Caries Imaged with Swept-Source Optical Coherence Tomography.

(1) Background: OCT imaging has been used to assess enamel demineralization in dental research, but it is not yet developed enough to qualify as a diagnostic technique in clinics. The current capabilities of most commercial acquisition software allow for visual and qualitative assessments. There is a need for a fast and verified batch-processing algorithm to segment and analyze demineralized enamel.

Inhibition of Caries around Restoration by Ion-Releasing Restorative Materials: An In Vitro Optical Coherence Tomography and Micro-Computed Tomography Evaluation.

The objective of this study was firstly to assess the demineralization inhibitory effect of ion-releasing restorations in enamel adjacent to restoration using a biofilm caries model and secondly to compare the effect to that in a chemical caries model. Fifty-six bovine incisors were filled with either Surefil one (SuO), Cention N (CN) (both ion-releasing materials), Ketac-Molar (GIC) or Powerfill resin composite (RC). The restored teeth were then randomly divided into 2 groups according to the used caries model (biofilm or chemical caries model).

Interfacial integrity of bulk-fill resin composite restorations in deep Class-II cavities.

This study evaluated the interfacial integrity of deep (6 mm) Class-II (OM/OD) restorations placed using different bulk-fill resin composites [Filtek™ Bulk Fill Flowable Restorative (BF) and Filtek™ Bulk Fill Posterior Restorative (BP) (3M ESPE, St. Paul, MN, USA)] of different increment thicknesses (2 or 4 mm). BP was used for capping in all cases, while Filtek™ Z250 Universal Restorative (3M ESPE) was used as the control material.

Linear and volumetric shrinkage displacements of resin composite restorations with and without debonding.

The study aimed to compare shrinkage displacements of fully and partially bonded resin composite restorations (RCRs). Two groups (n=5) Class-I RCR evaluated: Group 1 (G1) fully bonded and Group 2 (G2) debonded at the floor. Experimental results were compared with predictions from simple theory and finite element analysis (FEA).

Particle generation and dispersion from high-speed dental drilling.

Objective: To investigate the characteristics of particle generation and dispersion during dental procedure using digital inline holography (DIH) METHODS: Particles at two locations, near-field and far-field, which represent the field closer to the procedure location and within 0.5 m from the procedure location respectively, are studied using two different DIH systems. The effect of three parameters namely rotational speed, coolant flow rate, and bur angle on particle generation and dispersion are evaluated by using 10 different operating conditions.

The effect of abutment material stiffness on the mechanical behavior of dental implant assemblies: A 3D finite element study.

Purpose: This study aimed to evaluate the stress distribution and microgap formation in implant assemblies with conical abutments made of different materials under an oblique load.

Materials And Methods: The mechanical behavior of an implant assembly with a titanium abutment was analyzed and compared with that of an assembly with a Y-TZP abutment using finite element analysis (FEA). A torque of 20 Ncm was first applied to the abutment screw, followed by oblique loads of 10 N-280 N applied to the prosthesis placed on the implant.

Secondary caries and marginal adaptation of ion-releasing versus resin composite restorations: a systematic review and meta-analysis of randomized clinical trials.

This systematic review was aimed to evaluate occurrence of secondary caries and marginal adaptation in ion-releasing materials versus resin composite. Electronic search of PubMed, Scopus, and Open Grey databases with no date or language restrictions until May 21st, 2021, was conducted. Randomized clinical trials that compared ion-releasing restorations versus resin composite were included.

Minimal Detectable Width of Tooth Fractures Using Magnetic Resonance Imaging and Method to Measure.

Introduction: Vertical root fracture (VRF) in root canal-treated (RCT) teeth is a common cause of pain, bone resorption, and tooth loss. VRF is also difficult to diagnose and measure. Magnetic resonance imaging (MRI) has the potential to identify VRF due to beneficial partial volume averaging, without using ionizing radiation.

Effects of tightening torque on screw stress and formation of implant-abutment microgaps: A finite element analysis.

Statement Of Problem: The mechanical behavior of the conical connection implant with different torque levels requires evaluation.

Purpose: The purpose of this finite element analysis study was to investigate the impact of abutment screw torque on the formation of microgaps at the implant-to-abutment interface of a conical connection under oblique loading. This is important because it is thought that bacteria can invade the internal implant space through the abutment-implant microgaps, causing peri-implantitis.

Sorptivity of water in enamel for categorizing caries lesions.

Objective: The aim of this research was to determine the association between sorptivity of water and the state of mineralization in carious enamel of different stages of severity.

Methods: As a preliminary work, water droplets of 1.5 μL were placed on the surfaces of hydroxyapatite (HA) discs of different densities.

Development and calibration of biochemical models for testing dental restorations.

Currently, resin composites are the most popular materials for dental restoration in clinical practice. Although the properties of such materials have been improved significantly, together with better clinical techniques used for their placement, early restoration failure still occurs too frequently. As clinical studies take years to complete, and new resin composites are being produced at ever increasing pace, laboratory assessment using accelerated but representative tests is necessary.

Influence of curing modes on the degree of conversion and mechanical parameters of dual-cured luting agents.

Purpose: To investigate the effects of different curing modes, including tack cure, on the degree of conversion (DC) and mechanical parameters of dual-cured luting agents for all-ceramic restorations.

Methods: Immediate light curing, intermittent light curing (2-s tack cure and a 1-min interval before the main cure), delayed light cuing (2-min delay) and chemical or no light curing were used to cure two dual-cured luting agents, RelyX Unicem and PermaCem 2.0, through a 1.

Methods of assessment of early dentine erosion: a review.

Dentine erosion is an increasingly recognised problem, especially in aging population, and various methods have been utilised for its assessment. This narrative review was planned to summarise the methods for the assessment of the early stages of dentine erosion. Relevant original articles published in the English language from 2013 to 2017 were reviewed.

Prosthetic Correction of Proclined Maxillary Incisors: A Biomechanical Analysis.

In some cases of proclined maxillary incisors, the proclination can be corrected by a fixed prosthesis. The aim of this study was to investigate the magnitude and distribution of (i) principal stresses in the adjacent alveolar bone and (ii) direct and shear stresses that are normal and parallel, respectively, to the bone-tooth interface of a normal angulated maxillary incisor, a proclined one, and a proclined one corrected with an angled prosthetic crown. 2D finite-element models were constructed, and a static load of 200 N on the palatal surface of the maxillary incisor at different load angles was applied.

Effectiveness of poly-γ-glutamic acid in maintaining enamel integrity.

Objective: The aim of the study was to determine demineralisation inhibition and remineralisation potential of poly-γ-glutamic acid with its possible mechanism of action on human dental enamel.

Methodology: Three sodium-fluoride(NaF) concentration(0.01%w/v,0.

Zinc and Metallothionein in the Development and Progression of Dental Caries.

Chronic oxidative stress and reactive oxygen species (ROS) in oral cavity as well as acidic pH on dental enamel surface due to the metabolic activities of bacterial plaque are the major contributors in the development and progression of dental caries. Along with other factors, deposition or dissolution Ca and Mg mostly determines the re- or demineralization of dental enamel. Zn plays an important role for both Ca and Mg bioavailability in oral cavity.

General and erosive tooth wear of 16-year-old adolescents in Kuantan, Malaysia: prevalence and association with dental caries.

Background: The objective of this study was to determine the prevalence and severity of general tooth wear (GTW), i.e. tooth wear irrespective of etiology and erosive tooth wear (ETW), i.

Influence of trace elements on dental enamel properties: A review.

Dental enamel, an avascular, irreparable, outermost and protective layer of the human clinical crown has a potential to withstand the physico-chemical effects and forces. These properties are being regulated by a unique association among elements occurring in the crystallites setup of human dental enamel. Calcium and phosphate are the major components (hydroxyapatite) in addition to some trace elements which have a profound effect on enamel.

Unusual multiple production of N-acylhomoserine lactones a by Burkholderia sp. strain C10B isolated from dentine caries.

Bacteria realize the ability to communicate by production of quorum sensing (QS) molecules called autoinducers, which regulate the physiological activities in their ecological niches. The oral cavity could be a potential area for the presence of QS bacteria. In this study, we report the isolation of a QS bacterial isolate C10B from dentine caries.