Innovative technology for evaluation of sperm DNA double-strand breaks diagnoses male factor infertility and prevents reproductive failures.

Neutral comet assay has been available for two decades to evaluate sperm double-strand breaks (DSBs). However, its clinical usability is limited due to its complex and time-consuming procedure, as well as the lack of a standardized scoring system. The aim of this study was to: develop a rapid diagnostic method for DSBs, Sperm DNA Fragmentation Releasing Assay (SDFR), and explore the association between DSBs and reproductive outcomes.

Live motile sperm sorting device for enhanced sperm-fertilization competency: comparative analysis with density-gradient centrifugation and microfluidic sperm sorting.

Purpose: A live motile sperm sorting device (LensHooke CA0) developed to prevent the deleterious effects of centrifugation was evaluated comparatively with conventional density-gradient centrifugation (DGC) and microfluidic-based device (Zymot) in sperm selection.

Methods: Semen samples from 239 men were collected. CA0 under different incubation intervals (5, 10, 30, and 60 min) and temperatures (20, 25, and 37℃) was conducted.

Development and integration of LensHooke R10 for automatic and standardized diagnosis for sperm DNA fragmentation.

Background: The sperm chromatin dispersion assay is commonly used to assess sperm DNA integrity. This approach is time-consuming, demonstrates poor chromatin preservation, and provides an ambiguous and unstandardized evaluation of fragmented chromatin.

Objectives: We aimed to (i) develop an optimized sperm chromatin dispersion assay with reduced operation time, (ii) validate R10 test accuracy by comparing it to a conventional sperm chromatin dispersion assay, and (iii) standardize the sperm DNA fragmentation analysis procedure by integrating artificial intelligence optical microscopic technology.

Testing quality of a self-monitoring blood glucose sensor with an auto-coding mechanism when used by patients versus technicians.

Background: In response to the problem of erroneous readings due to miscoding when performing self-monitoring blood glucose (SMBG), this study introduces a user-friendly SMBG biosensor with an innovative auto-coding module on the meter and strip. Actual users characterized the performance of the SMBG systems.

Methods: A total of 105 patients were incorporated in the study and Clarke error grid analysis (EGA) was administered to evaluate the clinical accuracy of the results obtained by the patients versus the technicians.

Evaluation of accuracy of FAD-GDH- and mutant Q-GDH-based blood glucose monitors in multi-patient populations.

Background: Glucose dehydrogenases have been highly promoted to high-accuracy blood glucose (BG) monitors. The flavin adenine dinucleotide glucose dehydrogenase (FAD-GDH) and mutant variant of quinoprotein glucose dehydrogenase (Mut. Q-GDH) are widely used in high-performance BG monitors for multi-patient use.

Accuracy and precision evaluation of seven self-monitoring blood glucose systems.

Background: Self-monitoring blood glucose (SMBG) systems play a critical role in management of diabetes. SMBG systems should at least meet the minimal requirement of the World Health Organization's ISO 15197:2003. For tight glycemic control, a tighter accuracy requirement is needed.

Superior long-term stability of a glucose biosensor based on inserted barrel plating gold electrodes.

Disposable one shot usage blood glucose strips are routinely used in the diagnosis and management of diabetes mellitus and their performance can vary greatly. In this paper we critically evaluated the long-term stability of glucose strips made of barrel plating gold electrodes. Compared to other glucose biosensing platforms of vapor deposited palladium and screen printed carbon electrodes, the proposed glucose biosensor was found to show the best stability among the three biosensing platforms in thermal acceleration experiments at 40 degrees C for 6 months with an average bias of 3.

Multiple screening of urolithic organic acids with copper nanoparticle-plated electrode: potential assessment of urolithic risks.

There is yet to be a reliable prediction of urolithiasis. To facilitate early diagnosis, a simple and rapid high performance liquid chromatography method with electrochemical detection using disposable copper-nanoparticle-plated electrodes (Cu(n)-SPE) was developed for multiple detection of creatinine and 4 urolithic organic acids. A total of 206 normal and urolithic human and canine urines and urolith samples were collected for direct analysis of creatinine, cystine, uric acid, oxalic acid, and citric acid without sample cleanup and derivatization processes.

A disposable screen-printed silver strip sensor for single drop analysis of halide in biological samples.

A screen-printed silver strip with three-electrode configuration of Ag-working, Ag-counter and Ag/Ag(x)O reference electrodes was developed for simultaneous determination of chloride, bromide and iodide in aqueous solutions. It was fabricated simply by screen-printing silver ink onto a polypropylene (PP) base. The in-situ prepared Ag/Ag(x)O reference electrode can avoid the leaching interference in chloride detection while using a conventional Ag/AgCl reference electrode.

Assessing the quality of Bionime self-monitoring blood glucose system Rightest GM110: a critical evaluation of interference and ambient circumstances.

Background: The key issue in preventing chronic diabetic complications is to maintain near-normoglycemia. Analytical evaluation of Bionime self-monitoring blood glucose (SMBG) Rightest GM110 was carried out in this study.

Methods: The evaluation was executed according to the Standards for Reporting Diagnostic Accuracy (STARD) and the Clinical and Laboratory Standards Institute (CLSI).

Fabrication of a glucose biosensor based on inserted barrel plating gold electrodes.

We demonstrate here the application of barrel plating gold electrodes for fabricating a new type of disposable amperometric glucose biosensor. It is prepared by inserting two barrel plating gold electrodes onto an injection molding plastic base followed by immobilizing with a bioreagent layer and membrane on the electrode surface. The primary function of barrel plating is to provide an economical way to electroplate manufactured parts.

Clinical evaluation of bionime rightest GM310 biosensors with a simplified electrode fabrication for alternative-site blood glucose tests.

Background: Most processes for fabricating biosensors applied to screen-printed carbon electrodes (SPCEs) are complex. This study presents a novel one-step process for manufacturing electrodes for injection-molding biosensors.

Methods: During the sensor-fabrication process, barrel-plated gold electrodes were inserted into an injection-molded base.

Fast differentiation of meats from fifteen animal species by liquid chromatography with electrochemical detection using copper nanoparticle plated electrodes.

A simple, rapid and reliable method based on high-performance liquid chromatography with electrochemical detection was developed to routinely differentiate among meat products from fifteen food animal species. Samples from cattle, pigs, goats, deer, horses, chickens, ducks, ostriches, salmon, cod, shrimp, crabs, scallops, bullfrogs and alligators each exhibited unique electrochemical profiles. Species-specific markers exhibited reproducible peak retention times with coefficients of variation less then 6% across different runs, body regions and subjects.

An electrochemical cell coupled with disposable screen-printed electrodes for use in flow injection analysis.

An electrochemical cell coupled with disposable screen-printed electrodes (SPEs) that is specifically designed for use in flow injection analysis (FIA) is described in this study. The cell is made of foldable polyoxymethylene (acetal) thick platelets with the bottom portion consisting of a cavity track to drag the SPEs in position and the top portion having predrilled T-like holes to arrange the Ag/AgCl reference electrode and stainless steel inlet & outlet. An "O ring" is suitably fixed on the top of the working electrode to form a thin-layer space where the electrochemical reaction can take place.

Amino acid analysis using disposable copper nanoparticle plated electrodes.

A disposable copper nanoparticle-plated screen-printed carbon electrode (designated as Cun-SPE(100-nm)) provides a new material for the determination of native amino acids. All 20 underivatized amino acids can be sensitively determined at 0.0 V vs.

Voltammetric peak separation of dopamine from uric acid in the presence of ascorbic acid at greater than ambient solution temperatures.

Peak overlap in voltammetry poses challenges for the quantitative analysis of electroactive species. Dopamine and uric acid are typically challenging to determine voltammetrically because of their very similar oxidation peak potentials. We report preliminary results of the use of a screen-printed carbon electrode for the determination of dopamine and uric acid in an electrolyte solution maintained above ambient temperatures.

Photoelectrochemical oxygen sensor using copper-plated screen-printed carbon electrodes.

We report here an efficient photocatalytic amperometric sensor for the determination of dissolved oxygen (DO) in phosphate buffer solution using a disposable copper-plated screen-printed carbon electrode (CuSPE). The photoelectrochemical activity toward DO of the CuSPE was related to the formation of a p-type semiconductor Cu(I)2O. The solution pH and biased potential (E(bias)) were systematically optimized as pH 8 PBS and -0.