In Vivo Intelligent Fluorescence Endo-Microscopy by Varifocal Meta-Device and Deep Learning.

Endo-microscopy is crucial for real-time 3D visualization of internal tissues and subcellular structures. Conventional methods rely on axial movement of optical components for precise focus adjustment, limiting miniaturization and complicating procedures. Meta-device, composed of artificial nanostructures, is an emerging optical flat device that can freely manipulate the phase and amplitude of light.

Abrupt autofocusing beam from a phase-only mask.

Airy beams have become an important beam shape for structured light beams because of their interesting self-accelerating and parabolic propagation properties. Many variants of Airy beams have been proposed, among which the Airy beam with cylindrical symmetry [also known as the circular Airy beam or abrupt autofocusing (AAF) beam] is particularly peculiar and has attracted special attention due to its shape transformation during propagation. Much effort has been devoted to understanding the properties of the AAF beam.

Intelligent Phase Contrast Meta-Microscope System.

Phase contrast imaging techniques enable the visualization of disparities in the refractive index among various materials. However, these techniques usually come with a cost: the need for bulky, inflexible, and complicated configurations. Here, we propose and experimentally demonstrate an ultracompact meta-microscope, a novel imaging platform designed to accomplish both optical and digital phase contrast imaging.

Varifocal Metalenses: Harnessing Polarization-Dependent Superposition for Continuous Focal Length Control.

Traditional varifocal lenses are bulky and mechanically complex. Emerging active metalenses promise compactness and design flexibility but face issues like mechanical tuning reliability and nonlinear focal length tuning due to additional medium requirements. In this work, we propose a varifocal metalens design based on superimposing light intensity distributions from two orthogonal polarization states.

Vacuum ultraviolet nonlinear metalens.

Vacuum ultraviolet (VUV) light plays an essential role across science and technology, from molecular spectroscopy to nanolithography and biomedical procedures. Realizing nanoscale devices for VUV light generation and control is critical for next-generation VUV sources and systems, but the scarcity of low-loss VUV materials creates a substantial challenge. We demonstrate a metalens that both generates-by second-harmonic generation-and simultaneously focuses the generated VUV light.

Metasurface-Based Abrupt Autofocusing Beam for Biomedical Applications.

Manipulation and precise delivery of optical energies in the regions of interest within specimens require different strategies. Hence, proper control of input beam parameters is a prerequisite. One of the prominent methods is metasurface optics, capable of crafting properties of light at nanoscales.

Meta-lens light-sheet fluorescence microscopy for imaging.

Light-sheet fluorescent microscopy has become the leading technique for imaging in the fields of disease, medicine, and cell biology research. However, designing proper illumination for high image resolution and optical sectioning is challenging. Another issue is geometric constraints arising from the multiple bulky components for illumination and detection.

Varifocal Metalens for Optical Sectioning Fluorescence Microscopy.

Fluorescence microscopy with optical sectioning capabilities is extensively utilized in biological research to obtain three-dimensional structural images of volumetric samples. Tunable lenses have been applied in microscopy for axial scanning to acquire multiplane images. However, images acquired by conventional tunable lenses suffer from spherical aberration and distortions.

Metalens-array-based high-dimensional and multiphoton quantum source.

The development of two-dimensional metasurfaces has shown great potential in quantum-optical technologies because of the excellent flexibility in light-field manipulation. By integrating a metalens array with a nonlinear crystal, we demonstrate a 100-path spontaneous parametric down-conversion photon-pair source in a 10 × 10 array, which shows promise for high-dimensional entanglement and multiphoton-state generation. We demonstrate two-, three- and four-dimensional two-photon path entanglement with different phases encoded by metalenses with fidelities of 98.

Achromatic metalens array for full-colour light-field imaging.

A light-field camera captures both the intensity and the direction of incoming light. This enables a user to refocus pictures and afterwards reconstruct information on the depth of field. Research on light-field imaging can be divided into two components: acquisition and rendering.

Advances in optical metasurfaces: fabrication and applications [Invited].

The research and development of optical metasurfaces has been primarily driven by the curiosity for novel optical phenomena that are unattainable from materials that exist in nature and by the desire for miniaturization of optical devices. Metasurfaces constructed of artificial patterns of subwavelength depth make it possible to achieve flat, ultrathin optical devices of high performance. A wide variety of fabrication techniques have been developed to explore their unconventional functionalities which in many ways have revolutionized the means with which we control and manipulate electromagnetic waves.

Ultrathin Planar Cavity Metasurfaces.

An ultrathin planar cavity metasurface is proposed based on ultrathin film interference and its practicability for light manipulation in visible region is experimentally demonstrated. Phase of reflected light is modulated by finely adjusting the thickness of amorphous silicon (a-Si) by a few nanometers on an aluminum (Al) substrate via nontrivial phase shifts at the interfaces and interference of multireflections generated from the planar cavity. A phase shift of π, the basic requirement for two-level phase metasurface systems, can be accomplished with an 8 nm thick difference.

GaN Metalens for Pixel-Level Full-Color Routing at Visible Light.

Metasurface-based components are known to be one of the promising candidates for developing flat optical systems. However, their low working efficiency highly limits the use of such flat components for feasible applications. Although the introduction of the metallic mirror has been demonstrated to successfully enhance the efficiency, it is still somehow limited for imaging and sensing applications because they are only available for devices operating in a reflection fashion.

Broadband achromatic optical metasurface devices.

Among various flat optical devices, metasurfaces have presented their great ability in efficient manipulation of light fields and have been proposed for variety of devices with specific functionalities. However, due to the high phase dispersion of their building blocks, metasurfaces significantly suffer from large chromatic aberration. Here we propose a design principle to realize achromatic metasurface devices which successfully eliminate the chromatic aberration over a continuous wavelength region from 1200 to 1680 nm for circularly-polarized incidences in a reflection scheme.

Versatile Polarization Generation with an Aluminum Plasmonic Metasurface.

All forms of light manipulation rely on light-matter interaction, the primary mechanism of which is the modulation of its electromagnetic fields by the localized electromagnetic fields of atoms. One of the important factors that influence the strength of interaction is the polarization of the electromagnetic field. The generation and manipulation of light polarization have been traditionally accomplished with bulky optical components such as waveplates, polarizers, and polarization beam splitters that are optically thick.

Fabrication of plasmonic devices using femtosecond laser-induced forward transfer technique.

Using femtosecond laser-induced forward transfer techniques we have fabricated gold dots and nanoparticles on glass substrates, as well as nanobumps on gold thin film. The surface morphologies of these structures with different laser fluences and film thicknesses are investigated. We also study the focusing and defocusing properties of the nanofence-an arranged nanobump pattern-by the total-internal reflection microscope.

Fast fabrication of a Ag nanostructure substrate using the femtosecond laser for broad-band and tunable plasmonic enhancement.

Using a femtosecond laser, we have transformed the laser-direct-writing technique into a highly efficient method that can process AgO(x) thin films into Ag nanostructures at a fast scanning rate of 2000 μm(2)/min. The processed AgO(x) thin films exhibit broad-band enhancement of optical absorption and effectively function as active SERS substrates. Probing of the plasmonic hotspots with dyed polymer beads indicates that these hotspots are uniformly distributed over the treated area.

Fabrication of phase-change chalcogenide Ge2Sb2Te5 patterns by laser-induced forward transfer.

Femtosecond laser pulses are focused on a thin film of Ge2Sb2Te5 phase-change material, and the transfer of the illuminated material to a nearby substrate is investigated. The size, shape, and phase-state of the fabricated pattern can be effectively controlled by the laser fluence and by the thickness of the Ge2Sb2Te5 film. Results show multi-level electrical and optical reflection states of the fabricated patterns, which may provide a simple and efficient foundation for patterning future phase-change devices.

Fabrication of phase-change Ge2Sb2Te5 nano-rings.

Phase-change material Ge2Sb2Te5 rings with nanometer-scale thickness have been fabricated using the photo-thermal effect of a focused laser beam followed by differential chemical etching. Laser irradiation conditions and etching process parameters are varied to control the geometric characteristics of the rings. We demonstrate the possibility of arranging the rings in specific geometric patterns, and also their release from the original substrate.

Local electrical characterization of laser-recorded phase-change marks on amorphous Ge2Sb2Te5 thin films.

Amorphous thin films of Ge(2)Sb(2)Te(5), sputter-deposited on a thin-film gold electrode, are investigated for the purpose of understanding the local electrical conductivity of recorded marks under the influence of focused laser beam. Being amorphous, the as-deposited chalcogenide films have negligible electrical conductivity. With the aid of a focused laser beam, however, we have written on these films micron-sized crystalline marks, ablated holes surrounded by crystalline rings, and other multi-ring structures containing both amorphous and crystalline zones.

Laser-induced phase transitions of Ge2Sb2Te5 thin films used in optical and electronic data storage and in thermal lithography.

Amorphous thin films of Ge(2)Sb(2)Te(5), sputter-deposited on a ZnS-SiO(2) dielectric layer, are investigated for the purpose of understanding the structural phase-transitions that occur under the influence of tightly-focused laser beams. Selective chemical etching of recorded marks in conjunction with optical, atomic force, and electron microscopy as well as local electron diffraction analysis are used to discern the complex structural features created under a broad range of laser powers and pulse durations. Clarifying the nature of phase transitions associated with laser-recorded marks in chalcogenide Ge(2)Sb(2)Te(5) thin films provides useful information for reversible optical and electronic data storage, as well as for phase-change (thermal) lithography.