Polymer solubility mechanism in ionic liquids: H-NMR spectra and two-parameter hydrogen bonding analysis.

Understanding the polymer solubility in ionic liquids (ILs) is important for polymer processing or polymeric material preparation. Previously, two-parameter H-bonding analysis has been proposed to clarify that polymer solubility in ILs is dominated by H-bonding interactions (Y. F.

Gradient Graphene Spiral Sponges for Efficient Solar Evaporation and Zero Liquid Discharge Desalination with Directional Salt Crystallization.

Solar desalination is a promising strategy to utilize solar energy to purify saline water. However, the accumulation of salt on the solar evaporator surface severely reduces light absorption and evaporation performance. Herein, a simple and eco-friendly method to fabricate a 3D gradient graphene spiral sponge (GGS sponge) is presented that enables high-rate solar evaporation and zero liquid discharge (ZLD) desalination of high-salinity brine.

A nomogram for predicting the risk of preeclampsia in women with intrahepatic cholestasis of pregnancy based on prenatal monitoring time: a multicenter retrospective cohort study.

Background And Aims: Intrahepatic cholestasis of pregnancy (ICP) is a special liver disease during pregnancy, characterized by abnormal bile acid metabolism. However, there is no consensus on how to group women with ICP based on the time of diagnosis worldwide. This study aimed to adopt a new grouping model of women with ICP, and the time from diagnosis to delivery was defined as the monitoring period.

Solvent Effects on the H-NMR Chemical Shifts of Imidazolium-Based Ionic Liquids.

The H nuclear magnetic resonance ( H-NMR) spectrum is a useful tool for characterizing the hydrogen bonding (H-bonding) interactions in ionic liquids (ILs). As the main hydrogen bond (H-bond) donor of imidazolium-based ILs, the chemical shift (δ ) of the proton in the 2-position of the imidazolium ring (H2) exhibits significant and complex solvents, concentrations and anions dependence. In the present work, based on the dielectric constants (ϵ) and Kamlet-Taft (KT) parameters of solvents, we identified that the δ are dominated by the solvents polarity and the competitive H-bonding interactions between cations and anions or solvents.

Characteristic pollutants and microbial community in underlying soils for evaluating landfill leakage.

Leachate leakage poses a serious environmental risk to the safety of surrounding soils and groundwater. A much faster approach to reflect landfill leakage is the premise to mitigate the ecological risk of landfills. In this study, two landfills (BJ and WZ) were selected to investigate the leaching characteristics of various pollutants along the vadose soil depths.

Superelastic 3D Assembled Clay/Graphene Aerogels for Continuous Solar Desalination and Oil/Organic Solvent Absorption.

Superelastic, arbitrary-shaped, and 3D assembled clay/graphene aerogels (CGAs) are fabricated using commercial foam as sacrificial skeleton. The CGAs possess superelasticity under compressive strain of 95% and compressive stress of 0.09-0.

Engineering of for D-allose fermentative synthesis from D-glucose through izumoring cascade epimerization.

D-Allose is a potential alternative to sucrose in the food industries and a useful additive for the healthcare products in the future. At present, the methods for large-scale production of D-allose are still under investigation, most of which are based on enzyme-catalyzed Izumoring epimerization. In contrast, fermentative synthesis of D-allose has never been reported, probably due to the absence of available natural microorganisms.

Characterization of anaerobic oxidation of methane and microbial community in landfills with aeration.

Landfills are the third largest source of anthropogenic CH emissions. Anaerobic oxidation of methane (AOM) activity and communities of methane-oxidizing bacteria were investigated in three informal landfills in this study, namely, BJ, CH and SZ landfills, among which BJ and CH represent traditional anaerobic landfills, while the SZ landfill was subjected to aeration to accelerate waste stabilization. The AOM rates of the investigated landfilled wastes ranged from 3.

Metabolically Engineered for Conversion of D-Fructose to D-Allulose Phosphorylation-Dephosphorylation.

D-Allulose is an ultra-low calorie sweetener with broad market prospects. As an alternative to Izumoring, phosphorylation-dephosphorylation is a promising method for D-allulose synthesis due to its high conversion of substrate, which has been preliminarily attempted in enzymatic systems. However, phosphorylation-dephosphorylation requires polyphosphate as a phosphate donor and cannot completely deplete the substrate, which may limit its application in industry.

Intelligent self-control of carbon metabolic flux in SecY-engineered Escherichia coli for xylitol biosynthesis from xylose-glucose mixtures.

Xylitol is a salutary sugar substitute that has been widely used in the food, pharmaceutical, and chemical industries. Co-fermentation of xylose and glucose by metabolically engineered cell factories is a promising alternative to chemical hydrogenation of xylose for commercial production of xylitol. Here, we engineered a mutant of SecY protein-translocation channel (SecY [ΔP]) in xylitol-producing Escherichia coli JM109 (DE3) as a passageway for xylose uptake.

Engineering for d-Allulose Production from d-Fructose by Fermentation.

d-Allulose is considered an ideal alternative to sucrose and has shown tremendous application potential in many fields. Recently, most efforts on production of d-allulose have focused on enzyme-catalyzed epimerization of cheap hexoses. Here, we proposed an approach to efficiently produce d-allulose through fermentation using metabolically engineered JM109 (DE3), in which a SecY (ΔP) channel and a d-allulose 3-epimerase (DPEase) were co-expressed, ensuring that d-fructose could be transported in its nonphosphorylated form and then converted into d-allulose by cells.

Polymer solubility in ionic liquids: dominated by hydrogen bonding.

Polymer solubility in ionic liquids (ILs) cannot be predicted by the solubility parameter approach based on the "like dissolves like" principle. According to the Kamlet-Abraham-Taft (KAT) multi-parameter polarity scale, ILs can be categorized on the basis of hydrogen-bond acidity or basicity ones. The experimental observations, that acidic ILs easily dissolve basic polymers and basic ILs dissolve acidic polymers, reflect the complementary nature of hydrogen-bonding interactions.

Flexible breeding performance under unstable climatic conditions in a tropical passerine in Southwest China.

Parents may adjust their breeding time to optimize reproductive output and reduce reproductive costs associated with unpredictable climatic conditions, especially in the context of global warming. The breeding performance of tropical bird species in response to local climate change is relatively understudied compared with that of temperate bird species. Here, based on data from 361 white-rumped munia ( ) nests, we determined that breeding season onset, which varied from 15 February to 22 June, was delayed by drought and high temperatures.

Efficient tandem organic light-emitting diodes with non-doped structures.

Highly efficient tandem organic light-emitting diodes (TOLEDs) were achieved based on a non-doped charge generation unit (CGU) consisting of LiF/Al/C60/4,4',4"-tris(N-3-methylphenyl-N-phenyl-amino) triphenylamine (m-MTDATA) and ultrathin emitting layers. The current-voltage characteristics of the CGU devices and electron-only devices and the capacitance-voltage characteristics of the CGU-based capacitance devices were characterized to explore the charge generation and injection mechanisms. The charge generation process occurs at the interface of C60/m-MTDATA through electron transferring from the highest occupied molecular orbital of m-MTDATA to the lowest unoccupied molecular orbital of C60.

Short and Soft: Multidomain Organization, Tunable Dynamics, and Jamming in Suspensions of Grafted Colloidal Cylinders with a Small Aspect Ratio.

The yet virtually unexplored class of soft colloidal rods with a small aspect ratio is investigated and shown to exhibit a very rich phase and dynamic behavior, spanning from liquid to nearly melt state. Instead of the nematic order, these short and soft nanocylinders alter their organization with increasing concentration from isotropic liquid with random orientation to small domains with preferred local orientation and eventually a multidomain arrangement with a local orientational order. The latter gives rise to a kinetically suppressed state akin to structural glass with detectable terminal relaxation, which, on further increasing concentration, reveals features of hexagonally packed order as in ordered block copolymers.

Feasibility of hyperspectral analysis for discrimination of rabbit liver VX2 tumor.

Background: Hepatocellular carcinoma is one of the most common malignant tumors worldwide. Currently, the most accurate diagnosis imaging modality for hepatocellular carcinoma is enhanced magnetic resonance imaging. However, it is still difficult to distinguish cirrhosis lesions, and novel diagnosis modalities are still needed.

Graphene aerogels that withstand extreme compressive stress and strain.

Graphene aerogels combining elastic, lightweight, and robust mechanical properties have been explored for a wide variety of applications. However, graphene aerogels are generally subject to brittle mechanical properties and the irreversible damage of network structures during extreme compressions. Thus, the challenge of finding ways to enhance the strength and resilience of graphene aerogels remains.

Hyperoside protects the blood-brain barrier from neurotoxicity of amyloid beta 1-42.

Mounting evidence indicates that amyloid β protein (Aβ) exerts neurotoxicity by disrupting the blood-brain barrier (BBB) in Alzheimer's disease. Hyperoside has neuroprotective effects both in vitro and in vivo against Aβ. Our previous study found that hyperoside suppressed Aβ-induced leakage of the BBB, however, the mechanism remains unclear.

Recurrent "pneumonia" in left lower lobe lasting for 8 years: a case report.

Bronchioloalveolar carcinoma (BAC) is a unique lung neoplasm with variable forms, such as single nodular, multifocal and lobar pneumonic types. The pneumonic type BAC is often difficult to differentiate from pneumonia. Here we present a case of 63-year-old Chinese male, who had recurrent cough, white sputum with pneumonic lesions in left lower lobe.

Robust Vacuum-/Air-Dried Graphene Aerogels and Fast Recoverable Shape-Memory Hybrid Foams.

New graphene aerogels can be fabricated by vacuum/air drying, and because of the mechanical robustness of the graphene aerogels, shape-memory polymer/graphene hybrid foams can be fabricated by a simple infiltration-air-drying-crosslinking method. Due to the superelasticity, high strength, and good electrical conductivity of the as-prepared graphene aerogels, the shape-memory hybrid foams exhibit excellent thermotropical and electrical shape-memory properties, outperforming previously reported shape-memory polymer foams.

Polymer-Grafted Nanoparticles with Precisely Controlled Structures.

Polymer-tethered nanoparticles with different geometric shapes are very useful fillers of polymer nanocomposites. Herein, a universal approach for the fabrication of such nanoparticles with precisely controlled shape and composition is reported. By microphase separation of poly(3-(triethoxysilyl)propyl methacrylate)--polystyrene (PTEPM--PS) in the presence of oligomers, o-TEPM (oT) and/or o-S (oS), followed by cross-linking and dispersion in PS solvent, precisely tailored PS-grafted nanoparticles were prepared.

"Brill Transition" Shown by Green Material Poly(octamethylene carbonate).

Poly(octamethylene carbonate) (POMC), as the eighth member of the newly developed biodegradable aliphatic polycarbonate family, demonstrates a reversible crystal-crystal transition, which is highly similar to Brill transition extensively studied in the nylon family. With the dipole-dipole interaction in POMC much weaker than the hydrogen bonding, POMC exhibits its "Brill transition" temperature at around 42 °C, much lower than nylons. The two crystalline structures of POMC at below and above the transition temperature can be identified.

A systematic study of peripherally multiple aromatic ester-functionalized poly(benzyl ether) dendrons for the fabrication of organogels: structure-property relationships and thixotropic property.

A new class of peripherally multiple aromatic ester-functionalized poly(benzyl ether) dendrons and/or dendrimers with different focal point substituents, surface groups, interior structures, as well as different generations have been synthesized and their structure-property relationships with respect to their gelation ability have been investigated systematically. Most of these dendrons are able to gel organic solvents over a wide polarity range. Evident dendritic effects were observed not only in gelation capability but also in thermotropic, morphological, and rheological characterizations.

A new class of dendritic metallogels with multiple stimuli-responsiveness and as templates for the in situ synthesis of silver nanoparticles.

A new class of poly(aryl ether) dendritic ligands containing a pyridine functionality at the focal point and the corresponding Ag(I) complexes through metal-ligand coordination were designed, synthesized, and fully characterized. Compared with the dendritic ligands, the corresponding dendritic complexes exhibited much better gelation ability for various organic solvents at very low critical gelation concentrations. The gel-sol phase transition temperatures and morphologies could be finely tuned by binding silver ion to the ligand.