Functionalized covalent organic frameworks for catalytic conversion of biomass-derived xylan to furfural.

A direct synthesis strategy was employed to prepare functionalized COFs enriched with acidic sites, using various precursor monomers. The functionalized COFs were applied in the catalytic conversion of biomass-derived xylan to furfural in the liquid phase. The study further assessed the recyclability and reusability of these COFs, explored the relationship between their structural features and catalytic performance, and investigated the reaction mechanism underlying the COF-catalyzed conversion of xylan to furfural.

Switchable Solvent for Separation and Extraction of Lignin from Lignocellulose Biomass: An Investigation of Chemical Structure and Molecular Weight.

Lignin, the most abundant natural aromatic polymer, holds considerable promise for applications in various industries. The primary obstacle to the valorization of lignin into useful materials is its low molecular weight and diminished chemical reactivity, attributable to its intricate structure. This study aimed to treat lignocellulosic biomass using a switchable solvent (DBU-HexOH/HO) derived from the non-nucleophilic superbase 1,8-diazabicyclo [5.

Catalytic Production and Upgrading of Furfural: A Platform Compound.

Furfural is a renewable platform compound that can be derived from lignocellulosic biomass. The highly functionalized molecular structure of furfural enables us to prepare a variety of high value-added chemicals, which will help realize biomass high-value utilization, and alleviate energy and environmental problems. This paper reviews the research progress on furfural production and upgrading to C5 chemicals from the catalyst perspective.

Preparation of Alkali-Resistant Lignin Nanospheres Loaded with Silver Nanoparticles and Their Applications Toward Antibiosis and Printing.

Lignin nanoparticles (LNPs) loaded with silver nanoparticles have exhibited significant application potential in antibacterial and catalytic fields. However, the high solubility of LNPs in silver ammonia solution makes it difficult to achieve the reduction of Ag and the adsorption of silver nanoparticles. In this study, a protecting agent, terephthalic aldehyde (TA) is used to block lignin condensation and introduce aldehyde groups onto the lignin molecular backbone during lignin extraction.

Carboxymethyl cellulose-based photothermal film: A sustainable packaging with high barrier and tensile strength for food long-term antibacterial protection.

Traditional packaging materials feed the growing global food protection. However, these packaging materials are not conducive to environment and have not the ability to kill bacteria. Herein, a green and simple strategy is reported for food packaging protection and long-term antibacterial using carboxymethylcellulose-based photothermal film (CMC@CuS NPs/PVA) that consists of carboxymethyl cellulose (CMC) immobilized copper sulfide nanoparticles (CuS NPs) and polyvinyl alcohol (PVA).

Recent Advances of Bio-Based Hydrogel Derived Interfacial Evaporator for Sustainable Water and Collaborative Energy Storage Applications.

Solar interfacial evaporation strategy (SIES) has shown great potential to deal with water scarcity and energy crisis. Biobased hydrogel derived interfacial evaporator can realize efficient evaporation due to the unique structure- properties relationship. As such, increasing studies have focused on water treatment or even potential accompanying advanced energy storage applications with respect of efficiency and mechanism of bio-based hydrogel derived interfacial evaporation from microscale to molecular scale.

Effect of Pulping Waste Liquid on the Physicochemical Properties and the Prediction Model of Wheat Straw Residue Granular Fuels.

Herein, wheat straw residue and pulping waste liquid were collected from pulping mill and mixed to prepare bio-based granular fuels by using compression molding technology, and to explore the comprehensive utilization of the industrial waste of pulping and papermaking. The effects of pulping waste liquid on granular fuel properties were analyzed systemically. Further study of the function of pulping waste liquid, cellulose and hemicellulose was used to replace wheat straw residue and avoid the interference factors.

Lignocellulosic biomass pretreatment with a lignin stabilization strategy and valorization toward multipurpose fractionation.

Lignocellulosic biomass has emerged as a promising alternative with sustainable advantages for the production of a wide range of renewable products and value-added chemicals. In this study, a pretreatment strategy that use a fully recyclable acid hydrotrope (p-TsOH aqueous solution) to extract lignin and employ glyoxylic acid (GA) to stabilize lignin was proposed for biomass valorization toward multipurpose fractionation. 83.

Switchable Deep Eutectic Solvents for Lignin Dissolution and Regeneration.

Deep eutectic solvents (DESs) are promising for lignin dissolution and extraction. However, they usually possess high polarity and are difficult to recycle. To overcome this drawback, a variety of switchable ionic liquids (SILs) composed of 1,8-diazabicyclo[5.

Preparation of Dissolving Pulp by Combined Mechanical and Deep Eutectic Solvent Treatment.

Grasses are potential candidate to replace wood as a raw material for pulping and paper making, and several processes have been developed to produce grass pulp. In this study, wheat straw was used as raw material, and the possibility of sequential treatment with a mechanical method and deep eutectic solvent (DES) to prepare high-quality dissolving pulp was explored. Firstly, the wheat straw was mechanically treated, and then the wheat straw was delignified using a choline chloride-lactic acid deep eutectic solvent.

Facile sulfation of cellulose recyclable ternary deep eutectic solvents for low-cost cellulose nanofibril preparation.

Here we present a new method to treat cellulose with a sulfamic acid-urea-choline chloride (ternary deep eutectic solvent) system, which can realize both swelling and sulfation of cellulose. This can greatly reduce the energy consumption in the process of cellulose nanoization, and use it to successfully prepare food packaging films for eliminating odors. We hope that due its simplicity and resource-efficiency, this method will have a widespread influence on currently used (nano) cellulose modification protocols.

Biomass-Based Hydrothermal Carbons for the Contaminants Removal of Wastewater: A Mini-Review.

The preparation of adsorbents with eco-friendly and high-efficiency characteristics is an important approach for pollutant removal, and can relieve the pressure of water shortage and environmental pollution. In recent studies, much attention has been paid to the potential of hydrothermal carbonization (HTC) from biomass, such as cellulose, hemicellulose, lignin, and agricultural waste for the preparation of adsorbents. Hereby, this paper summarizes the state of research on carbon adsorbents developed from various sources with HTC.

Preparation of Salt-Induced Ultra-Stretchable Nanocellulose Composite Hydrogel for Self-Powered Sensors.

Hydrogels have attracted much attraction for promising flexible electronics due to the versatile tunability of the properties. However, there is still a big obstacle to balance between the multi-properties and performance of wearable electronics. Herein, we propose a salt-percolated nanocellulose composite hydrogel which was fabricated via radical polymerization with acrylic acid as polymer networks (NaCl-CNCs-PAA).

Effects of Lipase and Xylanase Pretreatment on the Structure and Pulping Properties of Wheat Straw.

Based on the reduction of environmental pollution, a biological enzyme assisted alkali-oxygen pulping method was explored to improve the delignification efficiency and fiber accessibility of wheat straw and improve the properties of wheat straw pulp. In this paper, lipase and xylanase were used to pretreat wheat straw and the effects of different enzyme types and enzyme dosage on the microstructure and pulp properties of wheat straw were investigated and experimented. The results showed that the lipase can remove fat and wax on the surface of wheat straw, while xylanase degraded the hemicellulose components, such as xylan, of wheat straw fiber, destroyed the structure of the lignin-carbohydrate complex, increasing lignin removal as a result and enhancing the impregnating, diffusion and penetration of alkali.

Synthesis of Silver Nanoparticles and Detection of Glucose via Chemical Reduction with Nanocellulose as Carrier and Stabilizer.

The application of silver nanoparticles (AgNPs) in antibacterial materials, glucose detection, etc., is of broad interest for researchers around the world. Nanocellulose with many excellent properties can be used as a carrier and stabilizer to assist in the synthesis of AgNPs.

High performance bio-supercapacitor electrodes composed of graphitized hemicellulose porous carbon spheres.

A template-free and one-step carbonization process was developed for fabricating graphitic porous carbon spheres (GPCSs) on hemicelluloses as the electrode material for supercapacitors. This method is green, low-energy, and less time consuming compared to the conventional two-step process (pore-forming and graphitizing). It uses KFeO, a mild activating agent that fulfills synchronous activation and graphitization.

Lignin-silver triggered multifunctional conductive hydrogels for skinlike sensor applications.

Conductive hydrogels have attracted tremendous attention as a novel generation of wearable devices and body monitoring due to their great stretchability and high flexibility. Here, a multifunctional cellulose nanocrystal @sodium lignosulfonate-silver-poly(acrylamide) nanocomposite hydrogel was prepared by radical polymerization within only a few minutes. This polymerization rapidly occurred by lignosulfonate-silver (Ls-Ag) dynamic catalysis that efficiently activated ammonium persulfate (APS) to initiate the free-radical polymerization.

Porous Carbon Spheres Derived from Hemicelluloses for Supercapacitor Application.

With the increasing demand for dissolving pulp, large quantities of hemicelluloses were generated and abandoned. These hemicelluloses are very promising biomass resources for preparing carbon spheres. However, the pore structures of the carbon spheres obtained from biomass are usually poor, which extensively limits their utilization.

A cellulose nanofibril-reinforced hydrogel with robust mechanical, self-healing, pH-responsive and antibacterial characteristics for wound dressing applications.

Background: Bacterial infection in wounds has become a major threat to human life and health. With the growth use of synthetic antibiotics and the elevated evolution of drug resistant bacteria in human body cells requires the development of novel wound curing strategies. Herein, a novel pH-responsive hydrogel (RPC/PB) was fabricated using poly(vinyl alcohol)-borax (PB) and natural antibiotic resveratrol grafted cellulose nanofibrils (RPC) for bacterial-infected wound management.

Strength Enhancement of Regenerated Cellulose Fibers by Adjustment of Hydrogen Bond Distribution in Ionic Liquid.

To improve the physical strength of regenerated cellulose fibers, cellulose dissolution was analyzed with a conductor-like screening model for real solvents in which 1-allyl-3-methylimidazolium chloride (AMIMCl) worked only as a hydrogen bond acceptor while dissolving the cellulose. This process could be promoted by the addition of urea, glycerol, and choline chloride. The dissolution and regeneration of cellulose was achieved through dry-jet and wet-spinning.

Lipase induced highly hydrophobic nanofibrillated cellulose film for strain sensor application.

An environmental-friendly lipase induced highly hydrophobic NFC film was fabricated through lipase induced dimethyl adipate (DA) esterification followed by silver nanowires (AgNWs) coating for strain sensor application. Due to the lipase activation, the substitution degree (DS) of 0.18 was achieved, which was three times higher than that of the control sample (without lipase treatment of NFC-DA).

Lignin Nanoparticles and Alginate Gel Beads: Preparation, Characterization and Removal of Methylene Blue.

A novel and effective green system consisting of deep eutectic solvent (DES) was proposed to prepare lignin nanoparticles (LNPs) without any lignin modification. The LNPs are obtained through the dialysis of the kraft lignin-DES solution. The particle size distribution, Zeta potential and morphology of the LNPs are characterized by using dynamic light scattering (DLS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM).